Study on mechanical properties and microstructure for three compounds of Al-Sn-Mg ternary alloys

References

• L. Zhengwei, X. Zhiwu, Z. Dawei, M. Zhipeng and Y. Jiuchun, Control of Mg2Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al. Journal of Materials Processing Tech 255 (2018), pp. 524–529.
   Web of Science ®Google Scholar
• I.M. Baghni, et al., Mechanical properties and potential applications of magnesium alloys. Trans. Nonferrous Metals Soc. China 6 (2003), pp. 1253–1259.
   Google Scholar
• B.L. Mordike and T. Ebert, Magnesium: properties applications e potential. Mater. Sci. Eng. A 302(1) (2001), pp. 37–45.
   Web of Science ®Google Scholar
• M. Easton, A. Beer, M. Barnett, et al., Magnesium alloy applications in automotive structures. Jom J. Minerals Metals Mater. Soc 60(11) (2008), pp. 57–62.
   Web of Science ®Google Scholar
• W.S. Miller, L. Zhuang, J. Bottema, et al., Recent development in aluminium alloys for the automotive industry. Mater. Sci. Eng. A 280(1) (2000), pp. 37–49.
   Web of Science ®Google Scholar
• M.R. Islam, M. Ishak, L.H. Shah, S.R.A. Idris and C. Meriç, Dissimilar welding of A7075-T651 and AZ31B alloys by gas metal arc plug welding method. Int. J. Adv. Manuf. Technol 88(9-12) (2017), pp. 2773–2783.
   Web of Science ®Google Scholar
• W. Guo, G. You, G. Yuan and X. Zhang, Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy. J. Alloys Compd 695 (2017), pp. 3267–3277.
   Web of Science ®Google Scholar
• J. Mohammadi, Y. Behnamian, A. Mostafaei, H. Izadi, T. Saeid, A.H. Kokabi and A.P. Gerlich, Friction stir welding joint of dissimilar materials between AZ31Bmagnesium and 6061 aluminum alloys: microstructure studies and mechanical characterizations. Mater. Charact 101 (2015), pp. 189–207.
   Web of Science ®Google Scholar
• G.B. Schaffer, T.B. Sercombe and R.N. Lumley, Liquid phase sintering of aluminum alloys. Mater. Chem. Phys. 67 (2001), pp. 85–91.
   Web of Science ®Google Scholar
• M. Zhu, M.Q. Zeng, Y. Gao, L.Z. Quyang and B.L. Li, Microstructure and wear properties of Al–Pb–Cu alloys prepared by mechanical alloying. Wear 253 (2002), pp. 832–838.
   Web of Science ®Google Scholar
• C.J. Kong, P.D. Brown, S.J. Harris and D.G. McCartney, The microstructures of a thermally sprayed and heat treated Al–20 wt. %Sn–3 wt. %Si alloy. Mater. Sci. Eng. A 403 (2005), pp. 205–214.
   Web of Science ®Google Scholar
• D.K. Dwivedi, Adhesive wear behavior of cast aluminum–silicon alloys: overview. Mater. Des 31 (2010), pp. 2517–2531.
   Web of Science ®Google Scholar
• J. Patel and K. Morsi, Effect of mechanical alloying on the microstructure and properties of Al-Sn-Mg alloy. J. Alloys and Compd 540 (2012), pp. 100–106.
   Web of Science ®Google Scholar
• T.B. Sercombe. Non-Conventional Sintered Aluminum Powder Alloys, Ph.D. Thesis, The University of Queensland,1998.
   Google Scholar
• A.R. Riahi, A. Edrisy and A.T. Alpas, Effect of magnesium content on the high temperature adhesion of Al–Mg alloys to steel surfaces. Surf. Coat. Technol 203 (2009), pp. 2030–2035.
   Web of Science ®Google Scholar
• Z.C. Lu, Y. Gao, M.Q. Zeng and M. Zhu, Improving wear performance of dual-scale Al-Sn alloys: The role of Mg addition in enhancing Sn distribution and tribolayer stability. Wear 309 (2014), pp. 216–225.
   Web of Science ®Google Scholar
• T. Gödecke and F. Sommer, Experimental, Equi. Diagram, vol.9 (inGerman). Z. Met.kd. 85 (1994), pp. 683–691.
   Google Scholar
• C. Alper Billur. Interfacial Energies of Al-Sn-Mg and Zn-Sn-Mg Ternary Metallic Alloys, Ph. D thesis, Erciyes University, 2015.
   Google Scholar
• B.D. Cullity, Elements of X-Ray Diffraction, 3rd ed., Addison-Wesley Publishing Company, Inc, California, United States of America, 1967.
   Google Scholar
• W.D. Callister, Materials Science and Engineering-an Introduction, John Wiley and Sons, New York, 1997.
   Google Scholar
• C. Alper Billur, B. Saatçi and M. Arı, Thermoelectrical properties of supra-eutectic, eutectic and sub-eutectic compositions of Al–Sn–Mg ternary alloys. J. of Molecular Structure 1215 (2020), pp. 128153.
   Web of Science ®Google Scholar
• H. Sevik, S. Acıkgöz and S. Can Kurnaz, The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy. J. of Alloys and Compd 508 (2010), pp. 110–114.
   Web of Science ®Google Scholar
• C. Jihua, C. Zhenhua, Y. Hongge and Z. Fuquan, Microstructural characterization and mechanical properties of a Mg–6Zn–3Sn–2Al alloy. J. of Alloys and Compd 467 (2009), pp. l1–l7.
   Web of Science ®Google Scholar
• D.K. Xu, L. Liu, Y.B. Xu and E.H. Han, The influence of element Y on the mechanical properties of the as-extruded Mg–Zn–Y–Zr alloys. J. of Alloys and Compd 426 (2006), pp. 155–161.
   Web of Science ®Google Scholar
• R.D. Askeland and P.P. Phule, The Science and Engineering of Materials, 4th ed, Thomson/Brooks-Cole, London, 2003.
   Google Scholar