References
- D.G. Morris, M.A. Morris and J.C. Joye, High strength Cu-Zr alloys prepared by rapid solidification techniques. Mater. Sci. Eng. A 158 (1992), pp. 111–117. https://doi.org/https://doi.org/10.1016/0921-5093(92)90141-M.
- M.A. Morris, M. Leboeuf and D.G. Morris, Recrystallization mechanisms in a Cu-Cr-Zr alloy with a bimodal distribution of particles. Mater. Sci. Eng. A 188 (1994), pp. 255–265. https://doi.org/https://doi.org/10.1016/0921-5093(94)90380-8.
- F. Heringhaus, D. Raabe and G. Gottstein, On the correlation of microstructure and electromagnetic properties of heavily cold worked Cu-20 wt% Nb wires. Acta Metall. 43 (1995), pp. 1467–1476. https://doi.org/https://doi.org/10.1016/0956-7151(94)00378-U.
- D. Raabe and U. Hangen, Correlation of microstructure and type II superconductivity of a heavily cold rolled Cu-20mass% Nb in situ composite. Acta Mater. 44 (1996), pp. 953–961. https://doi.org/https://doi.org/10.1016/1359-6454(95)00239-1.
- D. Raabe, K. Miyake and H. Takahara, Processing, microstructure, and properties of ternary high-strength Cu–Cr–Ag in situ composites. Mater. Sci. Eng. A 291 (2000), pp. 186–197. https://doi.org/https://doi.org/10.1016/S0921-5093(00)00981-3.
- E. Botcharova, J. Freudenberger and L. Schultz, Cu–Nb alloys prepared by mechanical alloying and subsequent heat treatment. J Alloys Comp 365 (2004), pp. 157–163. https://doi.org/https://doi.org/10.1016/S0925-8388(03)00634-0.
- M.W. Decker, J.R. Groza and J.C. Gibeling, Creep properties of an extruded copper–8% chromium–4% niobium alloy. Mater. Sci. Eng. A 369 (2004), pp. 101–111. https://doi.org/https://doi.org/10.1016/j.msea.2003.10.306.
- E. Botcharova, J. Freudenberger and L. Schultz, Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys. Acta Mater. 54 (2006), pp. 3333–3341. https://doi.org/https://doi.org/10.1016/j.actamat.2006.03.021.
- C. Meric, E. Atik and T. Engez, Experimental microhardness for AA 1030, Cu, CuSn7, CuZn30 and 6114 alloys and a correlation with the Hall–petch relation. Mater. Res. Bull 34 (1999), pp. 2043–2052. https://doi.org/https://doi.org/10.1016/S0025-5408(99)00204-4.
- K. Sikdar, A. Mahata, B. Roy and D. Roy, Hybrid thermal stabilization of Zr doped nanocrystalline Cu. Mater. Des 164 (2019), pp. 107564. https://doi.org/https://doi.org/10.1016/j.matdes.2018.107564.
- C.C. Koch. in Materials science and technology—A comprehensive tTreatment, 15, Processing of Metals and Alloys, R.W. Cahn, ed., VCH Verlagsgesellschaft GmhH, Weinheim, Germany, 1991, pp. 193–245.
- C.E. Krill, H. Ehrhardt and R. Birringer, Thermodynamic stabilization of nanocrystallinity. Z. Metallkd 96 (2005), pp. 1134–1141. https://doi.org/https://doi.org/10.3139/146.101152.
- J.R. Trelewicz and C.A. Schuh, Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys. Phys. Rev. B 79 (2009), pp. 094112. https://doi.org/https://doi.org/10.1103/PhysRevB.79.094112.
- H.A. Murdoch and C.A. Schuh, Stability of binary nanocrystalline alloys against grain growth and phase separation. Acta Mater. 61 (2013), pp. 2121–2132. https://doi.org/https://doi.org/10.1016/j.actamat.2012.12.033.
- T. Chookajorn, H.A. Murdoch and C.A. Schuh, Design of stable nanocrystalline alloys. Science 337 (2012), pp. 951–954. https://doi.org/https://doi.org/10.1126/science.1224737.
- J. Weissmüller, Alloy effects in nanostructures. Nanostructured Mater 3 (1993), pp. 261–272. https://doi.org/https://doi.org/10.1016/0965-9773(93)90088-S.
- R. Kirchheim, Grain coarsening inhibited by solute segregation. Acta Mater. 50 (2002), pp. 413–419. https://doi.org/https://doi.org/10.1016/S1359-6454(01)00338-X.
- R.W. Siegel, Cluster-Assembled nanophase materials. Ann. Rev. Mater. Sci. 21 (1991), pp. 559–578. https://doi.org/https://doi.org/10.1146/annurev.ms.21.080191.003015.
- H. Gleiter, Nanostructured materials: state of the art and perspectives. Nanostruct. Mater 6 (1995), pp. 3. https://doi.org/https://doi.org/10.1016/0965-9773(95)00025-9.
- K.A. Darling, R.N. Chan, P.Z. Wong, J.E. Semones, R.O. Scattergood and C.C. Koch, Grain-size stabilization in nanocrystalline FeZr alloys. Scr. Mater 59 (2008), pp. 530–533. https://doi.org/https://doi.org/10.1016/j.scriptamat.2008.04.045.
- T. Frolov, K.A. Darling, L.J. Kecskes and Y. Mishin, Stabilization and strengthening of nanocrystalline copper by alloying with tantalum. Acta Mater. 60 (2012), pp. 2158–2168. https://doi.org/https://doi.org/10.1016/j.actamat.2012.01.011.
- K.A. Darling, A.J. Roberts, Y. Mishin, S.N. Mathaudhu and L.J. Kecskes, Grain size stabilization of nanocrystalline copper at high temperatures by alloying with tantalum. J. Alloys Compds 573 (2013), pp. 142–150. https://doi.org/https://doi.org/10.1016/j.jallcom.2013.03.177.
- A. Khalajhdayati and T.J. Rupert, High-temperature stability and grain boundary complexion formation in a nanocrystalline Cu-Zr alloy. JOM 67 (2015), pp. 2788. https://doi.org/https://doi.org/10.1007/S11837-015-1644-9.
- M.A. Atwater, D. Roy, K.A. Darling, B.G. Butler, R.O. Scattergood and C.C. Koch, The thermal stability of nanocrystalline copper cryogenically milled with tungsten. Mater. Sci. Eng. A 558 (2012), pp. 226–233. https://doi.org/https://doi.org/10.1016/j.msea.2012.07.117.
- P. Lu, F. Abdeljawad, M. Rodriguez, M. Chandross, D.P. Adams, B.L. Boyce, B.G. Clark and N. Argibay, On the thermal stability and grain boundary segregation in nanocrystalline PtAu alloys. Materialia 6 (2019), pp. 100298. https://doi.org/https://doi.org/10.1016/j.mtla.2019.100298.
- J.B. Correia, H.A. Davies and C.M. Sellar, Strengthening in rapidly solidified age hardened Cu-Cr and Cu-Cr-Zr alloys. Acta Mater. 45 (1997), pp. 177–190. https://doi.org/https://doi.org/10.1016/S1359-6454(96)00142-5.
- S. Plimpton, Fast parallel algorithms for short-range molecular dynamics. J. Comp. Phy 117 (1995), pp. 1–19. https://doi.org/https://doi.org/10.1006/jcph.1995.1039.
- D. Chen, Structural modeling of nanocrystalline materials. Comp. Mat. Sci 3 (1995), pp. 327–333. https://doi.org/https://doi.org/10.1016/0927-0256(94)00072-K.
- J. Li, Atomeye: an efficient atomistic configuration viewer. Modell. Simul. Mater. Sci. Eng 11 (2003), pp. 173. https://doi.org/https://doi.org/10.1088/0965-0393/11/2/305.
- P. Hirel, Atomsk: a tool for manipulating and converting atomic data files. Comp. Phy. Comm 197 (2015), pp. 212–219. https://doi.org/https://doi.org/10.1016/j.cpc.2015.07.012.
- D.J. Evans and B.L. Holian, The nose–hoover thermostat J. Chem. Phys 83 (1985), pp. 4069–4074. https://doi.org/https://doi.org/10.1063/1.449071.
- S.P. Pan, S.D. Feng, J.W. Qiao, W.M. Wang and J.Y. Qin, Correlation between local structure and dynamic heterogeneity in a metallic glass-forming liquid. J. Alloys. Compd 664 (2016), pp. 65–70. https://doi.org/https://doi.org/10.1016/j.jallcom.2015.12.223.
- B.K. Choi, G.H. Yoon and S. Lee, Molecular dynamics studies of CNT-reinforced aluminum composites under uniaxial tensile loading. Comp. B Eng 91 (2016), pp. 119–125. https://doi.org/https://doi.org/10.1016/j.compositesb.2015.12.031.
- M.I. Mendelev and A.H. King, The interactions of self-interstitials with twin boundaries. Phil. Magz 93 (2013), pp. 1268–1278. https://doi.org/https://doi.org/10.1080/14786435.2012.747012.
- X.W. Zhou, R.A. Johnson and H.N.G. Wadley, Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers. Phy. Rev. B 69 (2004), pp. 144113. https://doi.org/https://doi.org/10.1103/PhysRevB.69.144113.
- A. Stukowski, Visualization and analysis of atomistic simulation data with OVITO–the open Visualization tool. Mod. Sim. Mat. Sci. Eng 18 (2010), pp. 015012. https://doi.org/https://doi.org/10.1088/0965-0393/18/1/015012.
- J.D. Honeycutt and H.C. Andersen, Molecular dynamics study of melting and freezing of small lennard-jones clusters. J. Phy. Che 91 (1987), pp. 4950–4963. https://doi.org/https://doi.org/10.1021/j100303a014.
- C.L. Kelchner, S.J. Plimpton and J.C. Hamilton, Dislocation nucleation and defect structure during surface indentation. Phys. Rev. B 58 (1998), pp. 11085. https://doi.org/https://doi.org/10.1103/PhysRevB.58.11085.
- A. Stukowski, V.V. Bulatov and A. Arsenlis, Automated identification and indexing of dislocations in crystal interfaces. Mod. Sim. Mat. Sci. Eng 20 (2012), pp. 085007. https://doi.org/https://doi.org/10.1088/0965-0393/20/8/085007.
- G.K. Williamson and W.H. Hall, X-ray line broadening from filed aluminium and wolfram. Acta Metall. 1 (1953), pp. 22–31. https://doi.org/https://doi.org/10.1016/0001-6160(53)90006-6.
- K.J. Zeng and M. Hamalainen, A theoretical study of the phase equilibria in the Cu- Cr- Zr system. J. Alloys Compds 220 (1995), pp. 53–61. https://doi.org/https://doi.org/10.1016/0925-8388(94)06029-0.
- A.L. Ortiz and L. Shaw, X-ray diffraction analysis of a severely plastically deformed aluminum alloy. Acta Mater. 52 (2004), pp. 2185–2197. https://doi.org/https://doi.org/10.1016/j.actamat.2004.01.012.
- B.D. Cullity and S.R. Stock, Elements of X-ray Diffraction, Third ed., Prentice Hall, Upper Saddle River, 2001.
- M.E. Straumanis and L.S. Yu, Lattice parameters, densities expansion coefficients and perfection of structure of Cu and Cu-in α phase. Acta Cryst. Sec. A (1969), pp. A 25, 676. https://doi.org/https://doi.org/10.1107/S0567739469001549.
- P.R. Subramanian and D.E. Laughlin, Methods for phase diagram determination, in Phase Diagrams of Binary Tungsten Alloys, S.V.N. Naidu, P.R. Rao, eds., Indian Institute of Metals, Calcutta, 1991.
- C. Suryanarayana, Nanocrystalline materials. Int. Mater. Rev 40 (1995), pp. 41–64. https://doi.org/https://doi.org/10.1179/imr.1995.40.2.41.
- https://www.alfa.com.
- Tianxing Lu, Cunguang Chen, Pei Li, Chenzeng Zhang, Weihao Han, Yang Zhou, Challapalli Suryanarayana and Zhimeng Guo, Enhanced mechanical and electrical properties of in situ synthesized nano-tungsten dispersion-strengthened copper alloy. Mater. Sci. Eng. A Volume 799 (2 January 2021), pp. 140161. https://doi.org/https://doi.org/10.1016/j.msea.2020.140161.
- S. Pal, K.V. Reddy and C. Deng, On the role of Cu-Zr amorphous intergranular films on crack growth retardation in nanocrystalline Cu during monotonic and cyclic loading conditions. Comp. Mat. Sci 169 (2019), pp. 109122. https://doi.org/https://doi.org/10.1016/j.commatsci.2019.109122.
- W. Yanlong, L. Shuhua, X. Peng and J. Zou, FEM simulations of tensile deformation and fracture analysis for CuW alloys at mesoscopic level. Comp. Mat. Sci 50 (2011), pp. 3450–3454. https://doi.org/https://doi.org/10.1016/j.commatsci.2011.07.008.
- M. Wagih and C.A. Schuh, Grain boundary segregation beyond the dilute limit: separating the two contributions of site spectrality and solute interactions. Acta Mat 199 (2020), pp. 63–72. https://doi.org/https://doi.org/10.1016/j.actamat.2020.08.022.
- D. Amram and C.A. Schuh, Mechanical alloying produces grain boundary segregation in Fe-MG powders. Scripta Mat 180 (2020), pp. 57–61. https://doi.org/https://doi.org/10.1016/j.scriptamat.2020.01.021.
- V.V. Bukhanovsky, N.I. Grechanyuk, R.V. Minakova, I. Mamuzich, V.V. Kharchenko and N.P. Rudnitsky, Production technology, structure and properties of Cu–W layered composite condensed materials for electrical contacts. Int. J Ref. Met. Hard Mat 29 (2011), pp. 573–581. https://doi.org/https://doi.org/10.1016/j.ijrmhm.2011.03.007.