Processing of IN718/Ti–6Al–4V bimetallic joint using transient liquid phase bonding: effect of bonding temperature on the microstructure and mechanical properties

References

• R. Ran, Y. Wang, Y.-X. Zhang, F. Fang, H.-S. Wang, G. Yuan and G.-D. Wang, Microstructure, precipitates and mechanical properties of Inconel 718 alloy produced by two-stage cold rolling method. Mat. Sci. Eng. A 793 (2020), pp. 139860.
   Web of Science ®Google Scholar
• K. Chen, J. Dong and Z. Yao, Creep failure and damage mechanism of Inconel 718 alloy at 800-900°C. Met. Mater. Int. 2 (2021), pp. 970–984.
   Google Scholar
• R.C. Reed, The Superalloys, Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.
   Google Scholar
• J.D. Beal, R. Boyer and D. Sanders, Forming of titanium and titanium alloys, in ASM Handbook, ASM International, Vol. 14B, Ohio, 2006, pp. 656–670.
   Google Scholar
• H.J. Bong, D.H. Yoo, D.Y. Kim, Y.-N. Kwon and J. Lee, Correlative study on plastic response and formability of Ti-6Al-4V sheets under hot forming conditions. J. Manuf. Process 58 (2020), pp. 775–786.
   Web of Science ®Google Scholar
• B. Binesh, Diffusion brazing of IN718/AISI 316L dissimilar joint: microstructure evolution and mechanical properties. J. Manuf. Process 57 (2020), pp. 196–208.
   Web of Science ®Google Scholar
• G. Phanikumar, K. Chattopadhyay and P. Dutta, Joining of dissimilar metals: issues and modelling techniques. Sci. Technol. Weld. Join 16 (2011), pp. 313–317.
   Web of Science ®Google Scholar
• B.S.L. Nirudhoddi, K.S. Prasad, A. Vivek and G.S. Daehn, High strength welds in titanium & nickel based alloys by impact welding – a practical method. J. Adv. Join. Process 3 (2021), pp. 100056.
   Google Scholar
• Y. Hu, L. Wu, P. Zhou, Y. Ye and B. Wang, Fiber laser welding of Ti–6Al–4 V to Inconel 718 bimetallic structure via Cu/Ta multi-interlayer. Vacuum 192 (2021), pp. 110461.
   Web of Science ®Google Scholar
• X.-L. Gao, J. Liu and L.-J. Zhang, Dissimilar metal welding of Ti6Al4 V and Inconel 718 through pulsed laser welding-induced eutectic reaction technology. Int. J. Adv. Manuf. Tech. 96 (2018), pp. 1061–1071. .
   Web of Science ®Google Scholar
• L.G. Gorin, Welding titanium alloys to nickel-base alloys. Weld. Prod. 11 (1964), pp. 46–53.
   Google Scholar
• C.E. Ells, G.F. Taylor and R.C. Mansey, Joining nickel to titanium. Titan. Sci. Technol. 4 (1973), pp. 2527–2534.
   Google Scholar
• T. Ogura, K. Miyoshi, T. Matsumura, T. Imai and K. Saida, Improvement of joint strength in dissimilar friction welding of Ti-6Al-4V alloy to type-718 nickel-based alloy using the Au-Ni interlayer. Sci. Technol. Weld. Join 24 (2019), pp. 327–333.
   Web of Science ®Google Scholar
• P. Wanjara, J. Gholipour, K. Watanabe, K. Nezaki, Y. Tian and M. Brochu, Linear friction welding of IN718 to Ti6Al4 V. Mater. Sci. Forum 879 (2017), pp. 2072–2077.
   Google Scholar
• K. Martinsen, S.J. Hu and B.E. Carlson, Joining of dissimilar materials. Cirp. Ann.-Manuf. Techn. 64 (2015), pp. 679–699.
   Web of Science ®Google Scholar
• M. Emami, B. Binesh and J.M. Heydarzadeh, Analysis of microstructure, kinetics of isothermal solidification and mechanical properties of IN718/MBF-20/SS316L TLP joints. Philos. Mag. 101 (2021), pp. 1726–1749.
   Web of Science ®Google Scholar
• G.O. Cook and C.D. Sorensen, Overview of transient liquid phase and partial transient liquid phase bonding. J. Mater. Sci. 46 (2011), pp. 5305–5323.
   Web of Science ®Google Scholar
• S. Mirzaei and B. Binesh, Microstructure evolution mechanism and corrosion behavior of transient liquid phase bonded 304L stainless steel. Met. Mater. Int. 27 (2021), pp. 3417–3431.
   Web of Science ®Google Scholar
• N. Sheng, J. Liu, T. Jin, X. Sun and Z. Hu, Isothermal solidification stage during transient liquid-phase bonding single-crystal superalloys. Philos. Mag. 94 (2014), pp. 1219–1234.
   Web of Science ®Google Scholar
• W. Jie, Y. Haotain, L. Penghao, Z. Fuqi, L. Qiaomu and W. Qinying, The microstructure and mechanical properties of YT5 cemented carbide/carbon-carbon composite joints prepared by transient liquid phase diffusion bonding using Ni/Cu/Ti multiple foils as joining materials. Vacuum 187 (2021), pp. 110082.
   Web of Science ®Google Scholar
• E. Norouzi, M. Atapour and M. Shamanian, Effect of bonding temperature on the microstructure and mechanical properties of Ti-6Al-4V to AISI 304 transient liquid phase bonded joint. Mater. Des 99 (2016), pp. 543–551.
   Web of Science ®Google Scholar
• E. Norouzi, M. Shamanian, M. Atapour and B. Khosravi, Diffusion brazing of Ti–6Al–4V and AISI 304: an EBSD study and mechanical properties. J. Mater. Sci. 52 (2017), pp. 12467–12475.
   Google Scholar
• N. Ozdemir and B. Bilgin, Interfacial properties of diffusion bonded Ti–6Al–4 V to AISI 304 stainless steel by inserting a Cu interlayer. Int. J. Adv. Manuf. Technol. 41 (2009), pp. 519–526.
   Web of Science ®Google Scholar
• S. Zakipour, A. Halvaee, A.A. Amadeh, M. Samavatian and A. Khodabandeh, An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316Lto Ti–6Al–4 V. J. Alloys Compd. 626 (2015), pp. 269–276.
   Web of Science ®Google Scholar
• A. Surendar, A. Lucas, M. Abbas, R. Rahim and M. Salmani, Transient liquid phase bonding of stainless steel 316 L to Ti-6Al-4V using Cu/Ni multi-interlayer: microstructure, mechanical properties, and fractography. Weld. World 63 (2019), pp. 1025–1032.
   Web of Science ®Google Scholar
• A. Jalali, M. Atapour, M. Shamanian and M. Vahman, Transient liquid phase (TLP) bonding of Ti-6Al-4V/UNS 32750 super duplex stainless steel. J. Manuf. Process 33 (2018), pp. 194–202.
   Web of Science ®Google Scholar
• A. Fayegh, M. Aghaie-Khafri and B. Binesh, Interfacial microstructure and mechanical properties of transient liquid phase bonded IN718/Ti-6Al-4V joints. Weld. World (2021). doi:https://doi.org/10.1007/s40194-021-01134-y.
   Google Scholar
• ASTM E384. Standard test method for microindentation hardness of materials, ASTM International, 2009.
   Google Scholar
• ASTM D1002. Standard test method for apparent shear strength of single-lap joint adhesively bonded metal specimens by tension loading (metal-to-metal), ASTM International, 2005.
   Google Scholar
• A. Davoodi Jamaloei, H.R. Salimijazi, H. Edris and J. Mostaghimi, Study of TLP bonding of Ti-6Al-4 V alloy produced by vacuum plasma spray forming and forging. Mater. Des 121 (2017), pp. 355–366.
   Web of Science ®Google Scholar
• R. Wanhill and S. Barter, Fatigue of Beta Processed and Beta Heat-Treated Titanium Alloys, Springer Briefs in Applied Sciences and Technology, London Springer Dordrecht Heidelberg, 2012, pp. 5–10.
   Google Scholar
• A. Shaikha, S. Kumara, A. Dawaria, S.H. Kirwaia, A. Patila and R. Singh, Effect of temperature and cooling rates on the α+β morphology of Ti-6Al-4 V alloy. Procedia Struct. Integr. 14 (2019), pp. 782–789.
   Google Scholar
• T.B. Massalski, Binary Alloy Phase Diagrams, 2nd ed, ASM International, Metals Park, OH, 1986.
   Google Scholar
• J.-M. Koo, W.-B. Lee, M.-G. Kim, D.-U. Kim, Y.-J. Kim and S.-B. Jung, Induction brazing of γ-TiAl to alloy steel AISI 4140 using filler metal of eutectic Ag-Cu alloy coated with Ti film. Mater. Trans. 46 (2005), pp. 303–308.
   Web of Science ®Google Scholar
• T. Tetsui, Effects of brazing filler on properties of brazed joints between TiAl and metallic materials. Intermetallics 9 (2001), pp. 253–260.
   Web of Science ®Google Scholar
• W. Ming-Fang, Y. Chan, Y. Zhi Shuie and L. Rui Feng, Formation process of liquid in interface of Ti/Cu contact reaction couple. Trans. Nonferrous Metals Soc. China 15 (2005), pp. 125–129.
   Web of Science ®Google Scholar
• K.P. Gupta, The Nb-Ni-Ti (niobium-nickel-titanium) system-update. J. Phase Equilib. Diffus. 29 (2008), pp. 194–197.
   Web of Science ®Google Scholar
• D.S. Grummon, J.A. Shaw and J. Foltz, Fabrication of cellular shape memory alloy materials by reactive eutectic brazing using niobium. Mater. Sci. Eng. A 438-440 (2006), pp. 1113–1118.
   Web of Science ®Google Scholar
• B. Wierzba and W. Skibinski, The interdiffusion in copper-nickel alloys. J. Alloys Compd. 687 (2016), pp. 104–108.
   Web of Science ®Google Scholar
• C.A. Blue, R.A. Blue and R.Y. Lin, Microstructural evolution in joining of TiAl with a liquid Ti alloy. Scr. Metall. Mater. 32 (1995), pp. 127–132.
   Google Scholar
• I.-T.T. Hong and C.-H.H. Koo, Vacuum-furnace brazing of C103 and Ti-6Al-4 V with Ti-15Cu-15Ni filler-metal. Mater. Sci. Eng. A 398 (2005), pp. 113–127.
   Web of Science ®Google Scholar
• J.F. Shackelford and W. Alexander, Materials Science and Engineering Handbook, 3rd ed., CRC Press LLC, Boca Raton, FL, 2001.
   Google Scholar
• O.C. Afolabi and O.A. Ojo, Analysis of temperature effect on isothermal solidification completion time during transient liquid phase bonding. Philos. Mag. 101 (2021), pp. 1081–1096.
   Web of Science ®Google Scholar
• J. Ramirez and S. Liu, Diffusion brazing in the nickel-boron system. Weld. J 71 (1992), pp. 365s–376s.
   Web of Science ®Google Scholar
• O.A. Ojo, N.L. Richards and M.C. Chaturvedi, Isothermal solidification during transient liquid phase bonding of Inconel 738 superalloy. Sci. Technol. Weld. Join 9 (2009), pp. 532–540.
   Google Scholar
• G.E. Dieter, Mechanical Metallurgy, 3rd ed, Mc Graw-Hill Book Co, New York, 1986.
   Google Scholar
• ASM handbook, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Vol. 2, ASM International, Ohio, 1992.
   Google Scholar
• M.J. Donachie, Titanium: A Technical Guide, 2nd ed., ASM international, Ohio, 2000.
   Google Scholar