References
- A. Srinivasan, K.K. Ajithkumar, J. Swaminathan, U.T.S. Pillai and B.C. Pai, Creep behavior of AZ91 Magnesium alloy. Procedia. Eng. 55 (2013), pp. 109–113. doi:https://doi.org/10.1016/j.proeng.2013.03.228.
- C.J. Bettles, M.A. Gibson and S.M. Zhu, Microstructure and mechanical behaviour of an elevated temperature Mg-rare earth based alloy. Mater. Sci. Eng. A 505(1–2) (2009), pp. 6–12. doi:https://doi.org/10.1016/j.msea.2008.11.004.
- S.M. Zhu, M.A. Gibson, M.A. Easton and J.F. Nie, The relationship between microstructure and creep resistance in die-cast magnesium-rare earth alloys. Scr. Mater 63(7) (2010), pp. 698–703. doi:https://doi.org/10.1016/j.scriptamat.2010.02.005.
- P. Poddar, K.L. Sahoo, S. Mukherjee and A.K. Ray, Creep behaviour of Mg–8% Sn and Mg–8% Sn–3% Al–1% Si alloys. Mater. Sci. Eng. A 545 (2012), pp. 103–110. doi:https://doi.org/10.1016/j.msea.2012.03.007.
- S. Ong, W. Richards, A. Jain, G. Hautier, M. Kocher, S. Cholia, D. Gunter, V. Chevrier, K. Persson and G. Ceder, Python materials genomics (pymatgen): A robust, open-source python library for materials analysis. Comput. Mater. Sci 68 (2013), pp. 314–319. doi:https://doi.org/10.1016/j.commatsci.2012.10.028.
- C.Q. Liu, H.W. Chen, H. Liu, X.J. Zhao and J.F. Nie, Metastable precipitate phases in Mg–9.8 wt%Sn alloy. Acta Mater. 144 (2018), pp. 590–600. doi:https://doi.org/10.1016/j.actamat.2017.10.023.
- S. Henes and V. Gerold, Rontgenographische untersuchungen der ausscheidungvorgange in magnesium-blei- und magnesium-zinn-legierungen. Zeitschrift für Met 53 (1962), pp. 703.
- R.S. Busk, Magnesium and Its alloys, in Handbook of Materials Selection, John Wiley & Sons, Inc., 2002. pp. 259–265. doi:https://doi.org/10.1002/9780470172551.ch8.
- M. Gupta and N.M.L. Sharon, Introduction to magnesium, in Magnesium, Magnesium Alloys, and Magnesium Composites, John Wiley & Sons, Inc., 2011. pp. 1–12. doi:https://doi.org/10.1002/9780470905098.ch1.
- T.T. Sasaki, F.R. Elsayed, T. Nakata, T. Ohkubo, S. Kamado and K. Hono, Strong and ductile heat-treatable Mg-Sn-Zn-Al wrought alloys. Acta Mater. 99 (2015), pp. 176–186. doi:https://doi.org/10.1016/j.actamat.2015.06.060.
- T.T. Sasaki, K. Oh-ishi, T. Ohkubo and K. Hono, Enhanced age hardening response by the addition of Zn in Mg–Sn alloys. Scr. Mater 55(3) (2006), pp. 251–254. doi:https://doi.org/10.1016/j.scriptamat.2006.04.005.
- T.T. Sasaki, J.D. Ju, K. Hono and K.S. Shin, Heat-treatable Mg-Sn-Zn wrought alloy. Scr. Mater 61(1) (2009), pp. 80–83. doi:https://doi.org/10.1016/j.scriptamat.2009.03.014.
- Z.Z. Shi and W.Z. Zhang, Newly observed prismatic Mg2Sn laths in a Mg-Sn-Zn-Mn alloy. J. Mater. Sci 48(21) (2013), pp. 7551–7556. doi:https://doi.org/10.1007/s10853-013-7570-8.
- F.R. Elsayed, T.T. Sasaki, C.L. Mendis, T. Ohkubo and K. Hono, Compositional optimization of Mg-Sn-Al alloys for higher age hardening response. Mater. Sci. Eng. A 566 (2013), pp. 22–29. doi:https://doi.org/10.1016/j.msea.2012.12.041.
- G. Douglas. “Microstructural Characterisation and Modelling of Dilute Magnesium -Tin -Aluminium Alloys,” University of Birmingham, 2017.
- Z. Sun, Study on the effect of Sn and Al content on the Microstructure and properties of the Mg-Sn-Al alloys. General Research Institute for Nonferrous Metals (2021).
- C. Liu, H. Chen and J.-F. Nie, Interphase boundary segregation of Zn in Mg-Sn-Zn alloys. Scr. Mater 123 (Oct. 2016), pp. 5–8. doi:https://doi.org/10.1016/j.scriptamat.2016.05.035.
- C.L. Mendis, C.J. Bettles, M.A. Gibson and C.R. Hutchinson, An enhanced age hardening response in Mg-Sn based alloys containing Zn. Mater. Sci. Eng. A 435–436 (2006), pp. 163–171. doi:https://doi.org/10.1016/j.msea.2006.07.090.
- F.R. Elsayed, T.T. Sasaki, C.L. Mendis, T. Ohkubo and K. Hono, Significant enhancement of the age-hardening response in Mg-10Sn-3Al-1Zn alloy by Na microalloying. Scr. Mater 68(10) (2013), pp. 797–800. doi:https://doi.org/10.1016/j.scriptamat.2013.01.032.
- H. Pan, G. Qin, M. Xu, H. Fu, Y. Ren, F. Pan, Z. Gao, C. Zhao, Q. Yang, J. She and B. Song, Enhancing mechanical properties of Mg-Sn alloys by combining addition of Ca and Zn. Mater. Des 83 (2015), pp. 736–744. doi:https://doi.org/10.1016/j.matdes.2015.06.032.
- Y. Chen, L. Jin, W. Li, Y. Song and L. Hao, Microstructure and mechanical properties of as aged Mg–3Sn–1Al and Mg–3Sn–2Zn–1Al alloy. Mater. Sci. Technol 31(1) (2015), pp. 73–78. doi:https://doi.org/10.1179/1743284714Y.0000000607.
- F.S. Pan, S.Q. Luo, A.T. Tang, J. Peng and Y. Lu, Influence of stacking fault energy on formation of long period stacking ordered structures in Mg-Zn-Y-Zr alloys. Prog. Nat. Sci. Mater. Int 21(6) (2011), pp. 485–490. doi:https://doi.org/10.1016/S1002-0071(12)60087-2.
- A. Vaid, J. Guénolé, A. Prakash, S. Korte-Kerzel and E. Bitzek, Atomistic simulations of basal dislocations in Mg interacting with Mg17Al12 precipitates. Materialia 7(5) (2019), pp. 100355. doi:https://doi.org/10.1016/j.mtla.2019.100355.
- M. Gharghouri, G.C. Weatherly, J.D. Embury and J. Root, Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction. Philos. Mag. A 79(7) (1999), pp. 1671–1695. doi:https://doi.org/10.1080/01418619908210386.
- J.F. Nie, Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys. Scr. Mater 48(8) (2003), pp. 1009–1015. doi:https://doi.org/10.1016/S1359-6462(02)00497-9.
- C. Caceres and D. Rovera, Solid solution strengthening in concentrated Mg-Al alloys. J. Light Met 1(3) (2001), pp. 151–156. doi:https://doi.org/10.1016/S1471-5317(01)00008-6.
- B.Q. Shi, R.S. Chen and W. Ke, Solid solution strengthening in polycrystals of Mg-Sn binary alloys. J. Alloys Compd 509(7) (2011), pp. 3357–3362. doi:https://doi.org/10.1016/j.jallcom.2010.12.065.
- A. Akhtar and E. Teghtsoonian, Substitutional solution hardening of magnesium single crystals. Philos. Mag 25(4) (1972), pp. 897–916. doi:https://doi.org/10.1080/14786437208229311.
- A. Tehranchi, B. Yin and W.A. Curtin, Solute strengthening of basal slip in Mg alloys. Acta Mater. 151 (2018), pp. 56–66. doi:https://doi.org/10.1016/j.actamat.2018.02.056.
- C. Schuh. “3.40J Physical Metallurgy.” Massachusetts Institute of Technology: MIT OpenCourseWare, 2009.
- W.D. Robertson and R.E. Reed-Hill, Additional modes of deformation twinning in magnesium. Acta Metall. 5(12) (1957), pp. 717–727.
- A. Akhtar and E. Teghtsoonian, Solid solution strengthening of magnesium single crystals-I alloying behaviour in basal slip. Acta Metall. 17(11) (1969), pp. 1339–1349. doi:https://doi.org/10.1016/0001-6160(69)90151-5.
- H. Conrad and W.D. Robertson, Effect of temperature on the flow stress and strain-hardening coefficient of magnesium single crystals. JOM 9(4) (1957), pp. 503–512. doi:https://doi.org/10.1007/BF03397908.
- C.P. Blankenship, E. Hornbogen and E.A. Starke, Predicting slip behavior in alloys containing shearable and strong particles. Mater. Sci. Eng. A 169(1–2) (1993), pp. 33–41. doi:https://doi.org/10.1016/0921-5093(93)90596-7.
- C.R. Hutchinson, J.F. Nie and S. Gorsse, Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy. Metall. Mater. Trans. A 36(8) (2005), pp. 2093–2105. doi:https://doi.org/10.1007/s11661-005-0330-x.
- M. Liao, B. Li and M.F. Horstemeyer, Interaction between prismatic slip and a Mg17Al12 precipitate in magnesium. Comput. Mater. Sci 79 (2013), pp. 534–539. doi:https://doi.org/10.1016/j.commatsci.2013.07.016.
- C.M. Cepeda-Jiménez, M. Castillo-Rodríguez and M.T. Pérez-Prado, Origin of the low precipitation hardening in magnesium alloys. Acta Mater. 165 (2019), pp. 164–176. doi:https://doi.org/10.1016/j.actamat.2018.11.044.
- E.L.S. Solomon and E.A. Marquis, Deformation behavior of β′ and β′′′ precipitates in Mg-RE alloys. Mater. Lett 216 (2018), pp. 67–69. doi:https://doi.org/10.1016/j.matlet.2017.12.149.
- J. Wang and N. Stanford, Investigation of precipitate hardening of slip and twinning in Mg5%Zn by micropillar compression. Acta Mater. (2015), doi:https://doi.org/10.1016/j.actamat.2015.08.012.
- W.D. Callister and D.G. Rethwisch, Materials Science and Engineering: An Introduction, vol. 7, Wiley, New York, 2007.
- C.S. Ltd. “CrystalMaker®.”.
- L.M. Brown, Strengthening mechanisms in crystal plasticity, by Ali argon. Contemp. Phys 54(6) (Nov. 2013), pp. 306–307. doi:https://doi.org/10.1080/00107514.2013.857723.
- D. Hull and D.J. Bacon. “Chapter 9 - Dislocation Arrays and Crystal Boundaries,” D. Hull and D. J. B. T.-I. to D. (Fifth E. Bacon, Eds. Oxford: Butterworth-Heinemann, 2011, pp. 171–204. doi:https://doi.org/10.1016/B978-0-08-096672-4.00009-8.
- R. Alizadeh and J. Llorca, Interactions between basal dislocations and β1′ precipitates in Mg–4Zn alloy: mechanisms and strengthening. Acta Mater. 186 (2020), pp. 475–486. doi:https://doi.org/10.1016/j.actamat.2020.01.028.
- W. Xiao, X. Zhang, W.T. Geng and G. Lu, Atomistic study of plastic deformation in Mg-Al alloys. Mater. Sci. Eng. A 586 (2013), pp. 245–252. doi:https://doi.org/10.1016/j.msea.2013.07.093.
- Z. Huang, C. Yang, L. Qi, J.E. Allison and A. Misra, Dislocation pile-ups at β1 precipitate interfaces in Mg-rare earth (RE) alloys. Mater. Sci. Eng. A 742(September 2018) (2019), pp. 278–286. doi:https://doi.org/10.1016/j.msea.2018.10.104.
- G. Esteban-Manzanares, A. Ma, I. Papadimitriou, E. Martínez and J. Llorca, Basal dislocation/precipitate interactions in Mg-Al alloys: an atomistic investigation. Model. Simul. Mater. Sci. Eng 27(7) (2019), doi:https://doi.org/10.1088/1361-651X/ab2de0.