An analytical model to ascertain the fragmentation of cementite lamella at lamellar fault sites

References

• C.R. Brooks, Principles of Heat Treatment of Plain Carbon and Low Alloy Steels, 1st ed., ASM international, Ohio, 1996.
   Google Scholar
• T.V. Rajan, C.P. Sharma and A. Sharma, Heat Treatment: Principles and Techniques, Revised ed., Prentice-Hall of India, New Delhi, 1994.
   Google Scholar
• V.K. Sinha, R.S. Prasad, A. Mandal and J. Maity, A mathematical model to predict microstructure of heat-treated steel. J. Mater. Eng. Perform 16 (2007), pp. 461–469.
   Web of Science ®Google Scholar
• N. Sushanthi and J. Maity, Modification of Grange-Kiefer approach for determination of hardenability in eutectoid steel. Metall. Mater. Trans. A 45A (2014), pp. 6360–6371.
   Web of Science ®Google Scholar
• A. Jacot and M. Rappaz, A combined model for the description of austenitization, homogenization and grain growth in hypoeutectoid Fe-C steels during heating. Acta Mater. 47 (1999), pp. 1645–1651.
   Web of Science ®Google Scholar
• T. Akbay, R.C. Reed and C. Atkinson, Modelling reaustenitisation from ferrite/cementite mixtures in Fe-C steels. Acta Metall. Mater 42 (1994), pp. 1469–1480.
   Google Scholar
• C. Atkinson, T. Akbay and R.C. Reed, Theory for reaustenitisation from ferrite/cementite mixtures in Fe-C-X steels. Acta Metall. Mater 43 (1995), pp. 2013–2031.
   Google Scholar
• B. Karlsson and L.-E. Larsson, Homogenization by two-phase diffusion. Mater. Sci. Eng 20 (1975), pp. 161–170.
   Google Scholar
• C. Garcia de Andres, F.G. Caballero, C. Capdevila and H.K.D.H. Bhadeshia, Modelling of kinetics and dilatometric behavior of non-isothermal pearlite-to-austenite transformation in an eutectoid steel. Scr. Mater 39 (1998), pp. 791–796.
   Web of Science ®Google Scholar
• I. Olejarczyk-Wozenska, H. Adrian and B. Mrzyglod, Mathematical model of the process of pearlite austenitization. Arch. Metall. Mater 59 (2014), pp. 981–986.
   Web of Science ®Google Scholar
• J. Krawczyk and H. Adrian, The kinetics of austenite grain growth in steel for wind power plant shafts. Arch. Metall. Mater 55 (2010), pp. 91–100.
   Web of Science ®Google Scholar
• H. Adrian and E. Glowacz, The effect of nitrogen and microalloying elements (V and V+Al) on austenite grain growth of 40Cr8 steel. Arch. Metall. Mater 55 (2010), pp. 107–116.
   Web of Science ®Google Scholar
• J. Maity, A. Saha, D.K. Mondal and K. Biswas, Mechanism of accelerated spheroidization of steel during cyclic heat treatment around upper critical temperature. Philos. Mag. Lett 93 (2013), pp. 231–237.
   Web of Science ®Google Scholar
• A. Saha, D.K. Mondal and J. Maity, Effect of cyclic heat treatment on microstructure and mechanical properties of 0.6 wt% carbon steel. Mater. Sci. Eng. A 527 (2010), pp. 4001–4007.
   Web of Science ®Google Scholar
• A. Saha, D.K. Mondal, K. Biswas and J. Maity, Development of high strength ductile hypereutectoid steel by cyclic heat treatment process. Mater. Sci. Eng. A 541 (2012), pp. 204–215.
   Web of Science ®Google Scholar
• A.R. Subhani, D.K. Mondal, C. Mondal and J. Maity, Attainment of an exceptionally high strength in low-carbon steel along with modest ductility through a novel heat treatment route. Philos. Mag. Lett 98 (2018), pp. 240–251.
   Web of Science ®Google Scholar
• H.-Y. Li, M.-S. Han, D.-W. Li, J. Li and D.-C. Xu, Effect of cyclic heat treatment on microstructure and mechanical properties of 50CrV4 steel. J. Cent. South Univ 22 (2015), pp. 409–415.
   Web of Science ®Google Scholar
• Z.-Q. Lü, H.-F. Zhang, Q. Meng, Z.-H. Wang and W.-T. Fu, Effect of cyclic annealing on microstructure and mechanical properties of medium carbon steel. J. Iron Steel Res. Int 23 (2016), pp. 145–150.
   Web of Science ®Google Scholar
• M. Ali, E.U. Haq, A. Ibrahim, M.R.A. Karim, A. Ali, M. Fayyaz and F.K. Khera, Increase in ductility of high carbon steel due to accelerated precipitation of cementite. Met. Sci. Heat Treat 59 (2017), pp. 294–296.
   Web of Science ®Google Scholar
• S.-R. Su, R.-B. Song, C. Chen, J.-Y. Wang and Y.-C. Zhang, The novel process of spheroidizing-critical annealing used to optimize the properties of carburized steel and its effect on hardening mechanism of quenching and tempering. Mater. Sci. Eng. A 23 (2019), pp. 1–9 of Article No. 138322.
   Google Scholar
• J. Singh and S.K. Nath, Effects of cyclic heat treatment on microstructure and mechanical properties of 13%Cr-4%Ni martensitic stainless steel. J. Mater. Eng. Perform 29 (2020), pp. 2478–2490.
   Google Scholar
• L. Rayleigh, On the instability of jets. Lond. Math. Soc. Proc 10 (1878), pp. 4–12.
   Google Scholar
• Y.L. Tian and R.W. Kraft, Mechanisms of pearlite spheroidization. Metall. Trans. A 18A (1987), pp. 1403–1414.
   Web of Science ®Google Scholar
• J. Meiser and H.M. Urbassek, Α ↔ γ phase transformation in iron: comparative study of the influence of the interatomic interaction potential. Model. Simul. Mater. Sci. Eng 28 (2020), pp. 1–17 of Article No. 055011.
   Web of Science ®Google Scholar
• R. Finn, Capillary surface interfaces. Notices of the AMS 46 (1999), pp. 770–781.
   Google Scholar
• P. Montero de Hijes, K. Shi, E.G. Noya, E.E. Santiso, K.E. Gubbins, E. Sanz and C. Vega, The Young-Laplace equation for a solid–liquid interface. J. Chem. Phys 153 (2020), pp. 1–5 of Article No. 191102.
   Web of Science ®Google Scholar
• Anon, Alloy Phase Diagram, Vol. 3, ASM International, Ohio, USA, 1992.
   Google Scholar
• P. Shewmon, Diffusion in Solids, Ch.1, Springer International Publishers, Cham, 2016.
   Google Scholar
• G.H. Geiger and D.R. Poirier, Transport Phenomena in Metallurgy, 1st ed., Addison-Wesley Publishing Company, Cambridge, 1973.
   Google Scholar
• R.A. McKee, A generalization of the Nernst-Einstein equation for self-diffusion in high defect concentration solids. Solid State Ionics 5 (1981), pp. 133–136.
   Web of Science ®Google Scholar
• H.B. Aaron, On the kinetics of precipitate dissolution. Met. Sci. J 2 (1968), pp. 192–193.
   Google Scholar
• A. Fick, Ueber diffusion. Annalen der Physik (in German) 94 (1855), pp. 59–86.
   Google Scholar
• V. Raghavan, Materials Science and Engineering-A First Course, 3rd ed., Prentice Hall of India, New Delhi, 1995.
   Google Scholar
• O. Buggenhoudt, T. Schuler, C.-C. Fu and J.-L. Béchade, Predicting carbon diffusion in cementite from first principles. Phys. Rev. Mater 5 (2021), pp. 1–14 of Article No. 063401.
   Web of Science ®Google Scholar
• W.C. Chiou Jr and E.A. Carter, Structure and stability of Fe3C-cementite surfaces from first principles. Surf. Sci 530 (2003), pp. 87–100.
   Web of Science ®Google Scholar
• A. Howie and P.R. Swann, Direct measurements of stacking-fault energies from observations of dislocation nodes. Philos. Mag 6 (1961), pp. 1215–1226.
   Web of Science ®Google Scholar
• L.E. Karkina and I.N. Karkin, Atomistic modeling of stacking faults in cementite planes containing vector [001]. Phys. Met. Metallogr 120 (2019), pp. 995–1000.
   Web of Science ®Google Scholar
• H.K.D.H. Bhadeshia, Cementite. Int. Mater. Rev 65 (2020), pp. 1–27.
   Web of Science ®Google Scholar