Modelling of a novel infrared recycler for reclaiming waste plastics from automotive vehicles

References

• 4R Sustainability, Inc. 2011. "Conversion Technology: A Complement to Plastic Recycling.” Funded by The American Chemistry Council
   Google Scholar
• Affandi, M., N. Mamat, S. N. A. M. Kanafiah, and N. S. Khalid. 2013. “Simplified Equations for Saturated Steam Properties for Simulation Purpose.” Procedia Engineering 53: 722–726. doi: 10.1016/j.proeng.2013.02.095
   Google Scholar
• All About Recycling WWW Document. 2010. “ All Green Electronics Recycling.” Accessed 10.4.16. http://www.allgreenrecycling.com/all-about-recycling/.
   Google Scholar
• Andrady, A. L., and M. A. Neal. 2009. “Applications and Societal Benefits of Plastics.” Philosophical Transactions of the Royal Society B: Biological Sciences 364: 1977–1984. doi: 10.1098/rstb.2008.0304
   PubMed Web of Science ®Google Scholar
• Andreadou, C., and G. Martinopoulos. 2018. “CAPE-OPEN Simulation of Waste-to-Energy Technologies for Urban Cities.” International Journal of Sustainable Energy 37: 96–104. doi: 10.1080/14786451.2016.1177053
   Web of Science ®Google Scholar
• Anuar Sharuddin, S. D., F. Abnisa, W. M. A. Wan Daud, and M. K. Aroua. 2016. “A Review on Pyrolysis of Plastic Wastes.” Energy Conversion and Management 115: 308–326. doi: 10.1016/j.enconman.2016.02.037
   Web of Science ®Google Scholar
• Bergman, T. L., A. S. Lavine, F. P. Incropera, and D. P. DeWitt. 2011. Fundamentals of Heat and Mass Transfer. 7th ed. Hoboken, NJ: Wiley.
   Google Scholar
• Bobulski, J., and J. Piatkowski. 2018. “PET Waste Classification Method and Plastic Waste DataBase – WaDaBa.” In Image Processing and Communications Challenges 9, Advances in Intelligent Systems and Computing, edited by M. Choraś and R. S. Choraś, 57–64. Bydgoszcz, Poland: Springer.
   Google Scholar
• Buekens, A., and X. Zhou. 2014. “Recycling Plastics From Automotive Shredder Residues: A Review.” Journal of Material Cycles and Waste Management 16: 398–414. doi:10.1007/s10163-014-0244-z.
   Web of Science ®Google Scholar
• Butler, E., G. Devlin, and K. McDonnell. 2011. “Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research.” Waste and Biomass Valorization 2: 227–255. doi:10.1007/s12649-011-9067-5.
   Web of Science ®Google Scholar
• Cesetti, M., and P. Nicolosi. 2016. “Waste Processing: New Near Infrared Technologies for Material Identification and Selection.” Journal of Instrumentation 11: C09002. doi:10.1088/1748-0221/11/09/C09002.
   Web of Science ®Google Scholar
• DeGaspari, J. 2000. “ Infrared Recycler.” Mechanical Engineering-CIME.
   Google Scholar
• Golghate, C. D., and M. S. Pawar. 2012. “Green Supply Chain for Plastic Films: A Framework for the Coexistence of Ecosystems and Plastic Industry for a Better Environment.” International Journal of Sustainable Engineering 5: 17–32. doi:10.1080/19397038.2011.609946.
   Google Scholar
• Grause, G., A. Buekens, Y. Sakata, A. Okuwaki, and T. Yoshioka. 2011. “Feedstock Recycling of Waste Polymeric Material.” J Mater Cycles Waste Manag 13: 265–282. doi:10.1007/s10163-011-0031-z.
   Web of Science ®Google Scholar
• Gundupalli, S. P., S. Hait, and A. Thakur. 2017. “A Review on Automated Sorting of Source-Separated Municipal Solid Waste for Recycling.” Waste Management, Special Thematic Issue: Urban Mining and Circular Economy 60: 56–74. doi:10.1016/j.wasman.2016.09.015.
   Google Scholar
• Guptaa, B. K., and S. Singhb. 2018. “To Study the Feasibility of Coarse and Fine Plastic Aggregates in Concrete.” International Journal of Applied Engineering Research 13: 5815–5822.
   Google Scholar
• Hazrat, M. A., M. G. Rasul, and M. M. K. Khan. 2015. “A Study on Thermo-Catalytic Degradation for Production of Clean Transport Fuel and Reducing Plastic Wastes.” Procedia Engineering, The 6th BSME International Conference on Thermal Engineering 105: 865–876. doi:10.1016/j.proeng.2015.05.108.
   Google Scholar
• Hollstein, F., Í Cacho, S. Arnaiz, and M. Wohllebe. 2016. “ Challenges in automatic sorting of construction and demolition waste by hyperspectral imaging.” In Advanced Environmental, Chemical, and Biological Sensing Technologies XIII. Paper presented at the advanced environmental, chemical, and biological sensing technologies XIII, International Society for Optics and Photonics, 98620J. doi: 10.1117/12.2220769
   Google Scholar
• Hopewell, J., R. Dvorak, and E. Kosior. 2009. “Plastics Recycling: Challenges and Opportunities.” Philosophical Transactions of the Royal Society of London B Biological Sciences 364: 2115–2126. doi:10.1098/rstb.2008.0311.
   PubMed Web of Science ®Google Scholar
• Howell, J. R. 2010. “ A Catalog of Radiation Heat Transfer Configuration Factors [WWW Document].” Accessed November 24, 2016. http://www.thermalradiation.net/indexCat.html.
   Google Scholar
• Hubo, S., L. Leite, C. Martins, and K. Ragaert. 2014. “ Evaluation of Post-industrial and Post-consumer Polyolefin-based Polymer Waste Streams for Injection Moulding.” In 6th polymers & mould innovations international conference, proceedings, Guimaraes, Portugal, 201–206.
   Google Scholar
• Junior, E. O., A. Luiz, L. Serigiolle, and M. Marcial. 2016. “ End-of-Life Vehicle Recycling: Processes, Legislations and Benefits (SAE Technical Paper No. 2016-36–0426).” SAE International, Warrendale, PA. doi: 10.4271/2016-36-0426
   Google Scholar
• Kreiger, M. A., M. L. Mulder, A. G. Glover, and J. M. Pearce. 2014. “Life Cycle Analysis of Distributed Recycling of Post-Consumer High Density Polyethylene for 3-D Printing Filament.” Journal of Cleaner Production 70: 90–96. doi:10.1016/j.jclepro.2014.02.009.
   Web of Science ®Google Scholar
• Luciani, V., G. Bonifazi, P. Rem, and S. Serranti. 2015. “Upgrading of PVC Rich Wastes by Magnetic Density Separation and Hyperspectral Imaging Quality Control. Waste Management.” Urban Mining 45: 118–125. doi:10.1016/j.wasman.2014.10.015.
   Google Scholar
• Malik, N., P. Kumar, S. Shrivastava, and S. B. Ghosh. 2017. “An Overview on PET Waste Recycling for Application in Packaging.” Int J Plast Technol 21: 1–24. doi:10.1007/s12588-016-9164-1.
   Web of Science ®Google Scholar
• Merrington, A. 2017. “ 9 – Recycling of Plastics.” In Applied Plastics Engineering Handbook (Second Edition), 167–189, edited by M. Kutz. Plastics Design Library. William Andrew Publishing. doi: 10.1016/B978-0-323-39040-8.00009-2
   Google Scholar
• Nakatani, J., K. Konno, and Y. Moriguchi. 2017. “Variability-based Optimal Design for Robust Plastic Recycling Systems.” Resources, Conservation and Recycling 116: 53–60. doi:10.1016/j.resconrec.2016.09.020.
   Web of Science ®Google Scholar
• Notarnicola, M., G. Cornacchia, S. De Gisi, F. Di Canio, C. Freda, P. Garzone, M. Martino, V. Valerio, and A. Villone. 2017. “Pyrolysis of Automotive Shredder Residue in a Bench Scale Rotary Kiln.” Waste Management 65: 92–103. doi:10.1016/j.wasman.2017.04.002.
   PubMed Web of Science ®Google Scholar
• Plastics Europe [WWW Document]. 2013. Accessed July 19, 2016. http://www.plasticseurope.org/plastics-sustainability-14017/zero-plastics-to-landfill/waste-pre-treatment-and-sorting.aspx.
   Google Scholar
• Ragaert, K., L. Delva, and K. Van Geem. 2017. “Mechanical and Chemical Recycling of Solid Plastic Waste.” Waste Management 69: 24–58. doi:10.1016/j.wasman.2017.07.044.
   PubMed Web of Science ®Google Scholar
• Rajagopal, R. R., R. Rajarao, S. T. Cholake, and V. Sahajwalla. 2017. “Sustainable Composite Panels From Non-Metallic Waste Printed Circuit Boards and Automotive Plastics.” Journal of Cleaner Production 144: 470–481. doi:10.1016/j.jclepro.2016.12.139.
   Web of Science ®Google Scholar
• Sabaghi, M., C. Mascle, P. Baptiste, and R. Rostamzadeh. 2016. “Sustainability Assessment Using Fuzzy-Inference Technique (SAFT): A Methodology Toward Green Products.” Expert Systems with Applications 56: 69–79. doi:10.1016/j.eswa.2016.02.038.
   Web of Science ®Google Scholar
• Sadat-Shojai, M., and G.-R. Bakhshandeh. 2011. “Recycling of PVC Wastes.” Polymer Degradation and Stability 96: 404–415. doi:10.1016/j.polymdegradstab.2010.12.001.
   Web of Science ®Google Scholar
• Santini, A., F. Passarini, I. Vassura, D. Serrano, J. Dufour, and L. Morselli. 2012. “Auto Shredder Residue Recycling: Mechanical Separation and Pyrolysis.” Waste Management 32: 852–858. doi:10.1016/j.wasman.2011.10.030.
   PubMed Web of Science ®Google Scholar
• Sharqawy, M. H., J. H. Lienhard, and S. M. Zubair. 2010. “Thermophysical Properties of Seawater: A Review of Existing Correlations and Data.” Desalination and Water Treatment 16: 354–380. doi: 10.5004/dwt.2010.1079
   Web of Science ®Google Scholar
• Siegel, R. 2001. Thermal Radiation Heat Transfer, Fourth Edition. London: CRC Press.
   Google Scholar
• Singh, P., and V. P. Sharma. 2016. “Integrated Plastic Waste Management: Environmental and Improved Health Approaches. Procedia Environmental Sciences.” Waste Management for Resource Utilisation 35: 692–700. doi:10.1016/j.proenv.2016.07.068.
   Google Scholar
• Tackling Complex Plastic Recycling Challenges [WWW Document]. 2015. Accessed 10.4.16. https://waste-management-world.com/a/tackling-complex-plastic-recycling-challenges.
   Google Scholar
• Thompson, R. C., S. H. Swan, C. J. Moore, and F. S. vom Saal. 2009. “Our Plastic age.” Philosophical Transactions of the Royal Society B: Biological Sciences 364: 1973–1976. doi:10.1098/rstb.2009.0054.
   PubMed Web of Science ®Google Scholar
• Vermeulen, I., J. Van Caneghem, C. Block, J. Baeyens, and C. Vandecasteele. 2011. “Automotive Shredder Residue (ASR): Reviewing its Production From End-of-Life Vehicles (ELVs) and its Recycling, Energy or Chemicals’ Valorisation.” Journal of Hazardous Materials 190: 8–27. doi:10.1016/j.jhazmat.2011.02.088.
   PubMed Web of Science ®Google Scholar
• Vrancken, C., P. J. Longhurst, and S. T. Wagland. 2017. “Critical Review of Real-Time Methods for Solid Waste Characterisation: Informing Material Recovery and Fuel Production.” Waste Management 61: 40–57. doi:10.1016/j.wasman.2017.01.019.
   PubMed Web of Science ®Google Scholar
• Wagner, W., and H. J. Kretzschmar. 2008. International Steam Tables - Properties of Water and Steam. 2nd ed. Berlin: Springer.
   Google Scholar
• Wang, C.-Q., H. Wang, and Y.-N. Liu. 2015. “Separation of Polyethylene Terephthalate From Municipal Waste Plastics by Froth Flotation for Recycling Industry.” Waste Management 35: 42–47. doi:10.1016/j.wasman.2014.09.025.
   PubMed Web of Science ®Google Scholar