References
- IEC, “Instrument transformers—part 2: Additional requirements for current transformers,” IEC Standard 61869–2, 2012.
- IEEE, “IEEE standard requirements for instrument transformers,” . IEEE Standard C.57.13, 2008.
- Bayliss, C.R., and Hardy, B.J., Transmission and Distribution Electrical Engineering (4th ed.),” Oxford, UK: Nownes—Elsevier Ltd., Chap. 5, pp. 157–170, 2012.
- Kaczmarek, M., “The source of the inductive current transformers metrological properties deterioration for transformation of distorted currents,” Elect. Power Syst. Res., Vol. 107, No. 2, pp. 45–50, 2014.
- Zhou, M., Centeno, V., Thorp, J.S., and Phadke, A.G., “Calibrating instrument transformers with phasor measurements,” Elec. Power Compon. Syst., Vol. 40, No. 14, pp. 1605–1620, 2012.
- Cerri, G., De Leo, R., Primiani, R., Pennesi, S., and Russo, P., “Wide band characterization of current probes,” IEEE Trans. El. Comp., Vol. 45, No. 4, pp. 616–625, 2003.
- Lesniewska, E., and Rajchert, R., “Application of the field-circuit method for the computation of measurement properties of current transformers with cores consisting of different magnetic materials,” IEEE Trans. Mag., Vol. 46, No. 10, pp. 3778–3782, 2010.
- Kaczmarek, M., “Studies of the inductive current transformer with Ni80Fe20 toroidal core transformation characteristics designated for sinusoidal currents of frequency 50 Hz—20 kHz” (printed in Polish), Prz. Elektrotech., Vol. 87, No. 11, pp. 1–4, 2011.
- Kaczmarek, M., and Nowicz, R., “Comparison of wide frequency metrological properties of inductive current transformers,” Prz. Elektrotech., Vol. 88, No. 8, pp. 63–65, 2012.
- Gallo, G., Landi, C., and Luiso, M., “Real-time digital compensation of current transformers over a wide frequency range,” IEEE Trans. Inst. and Meas., Vol. 59, No. 5, pp. 1119–1126, 2010.
- Wrzecionko, B., Steinmann, L., and Kolar, J.W., “High-bandwidth high-temperature (250°C/500°F) isolated DC and AC current measurement: Bidirectionally saturated current transformer,” IEEE Trans. Power Elec., Vol. 28, No. 11, pp. 5404–5413, 2013.
- So, E., and Bennett, D., “Compact wideband high-current (≥ 1000 A) multistage current transformers for precise measurements of current harmonics,” IEEE Trans. Inst. and Meas., Vol. 56, No. 2, pp. 584–587, 2007.
- Locci, N., and Muscas, C., “Hysteresis and eddy current compensation in current transformers,” IEEE Trans. Power Deliv., Vol. 16, No. 2, pp. 154–159, 2001.
- Locci, N., and Muscas, C., “A digital compensation method for improving current transformer accuracy,” IEEE Trans. Power Deliv., Vol. 15, No. 4, pp. 1104–1109, 2000.
- Saied, M.M., and Alfuhaid, A.S., “Frequency response of two-winding transformers obtained by a distributed-parameter s-domain method,” Elect. Power Compon. Syst., Vol. 32, No. 8, pp. 755–766, 2004.
- Kaczmarek, M., and Brodecki, D., “Influence of the capacity between windings of the voltage transformer on transfer of voltage surges,” . International Colloquium Transformer Research and Asset Management, Cavtat, Croatia, 12–14 November 2009.
- IEC, “Instrument transformers—the use of instrument transformers for power quality measurements,” . Technical Report IEC/TR 61869-103, 2012.
- Starczakow, W., Instrument Transformers, . Warsaw, Poland: Panstwowe Wydawnictwo Techniczne, 1954 (in Polish).