153
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

Cost on Reliability and Production Loss for Power Converters in the Doubly Fed Induction Generator to Support Modern Grid Codes

, , &
Pages 152-164 | Received 28 Apr 2015, Accepted 22 Aug 2015, Published online: 14 Dec 2015

References

  • Chen, Z., Guerrero, J.M., and Blaabjerg, F., “A review of the state of the art of power electronics for wind turbines,” IEEE Trans. Power Electron., Vol.. 24, No. 8, pp. 1859–1875, Aug. 2009.
  • Blaabjerg, F., Chen, Z., and Kjaer, S.B., “Power electronics as efficient interface in dispersed power generation systems,” IEEE Trans. Power Electron., Vol. 19, No. 5, pp. 1184–1194, September 2004.
  • Liserre, M., Cardenas, R., Molinas, M., and Rodriguez, J., “Overview of multi-MW wind turbines and wind parks,” IEEE Trans. Ind. Electron., Vol.. 58, No. 4, pp. 1081–1095, April 2011.
  • Hahn, B., Durstewitz, M., and Rohrig, K., “Reliability of wind turbines—experience of 15 years with 1500 WTs,” in Wind Energy: Proceedings of the Euromech Colloquium, Berlin: Springer-Verlag, pp. 329–332, 2007.
  • ZVEL, Handbook for Robustness Validation of Automotive Electrical/Electronic Modules, June 2008.
  • Wintrich, A., Nicolai, U., and Reimann, T., Semikron Application Manual, p. 128, 2011.
  • Rabelo, B.C., Hofmann, W., da Silva, J.L., de Oliveira, R.G.,and Silva, S.R., “Reactive power control design in doubly fed induction generators for wind turbines,” IEEE Trans. Ind. Electron., Vol. 56, No. 10, pp. 4154–4162, October 2009.
  • Sujod, M.Z., Erlich, I., and Engelhardt, S., “Improving the reactive power capability of the DFIG-based wind turbine during operation around the synchronous speed,” IEEE Trans. Energy Convers., Vol. 28, No. 3, pp. 736–745, September 2013.
  • Foster, S., Xu, L., and Fox, B., “Coordinated reactive power control for facilitating fault ride through of doubly fed induction generator- and fixed speed induction generator-based wind farms,” IET Renew. Power Generat., Vol. 4, No. 2, pp. 128–138, March 2010.
  • E. ON-Netz, Requirements for offshore grid connections, April 2008.
  • Engelhardt, S., Erlich, I., Feltes, C., Kretschmann, J., and Shewarega, F., “Reactive power capability of wind turbines based on doubly fed induction generators,” IEEE Trans. Energy Convers., Vol. 26, No. 1, pp. 364–372, March 2011.
  • Wei, L., Kerkman, R.J. , Lukaszewski, R.A. , Lu, H., and Yuan, Z., “Analysis of IGBT power cycling capabilities used in doubly fed induction generator wind power system,” IEEE Trans. Ind. Appl., Vol. 47, No. 4, pp. 1794–1801, July–August 2011.
  • Weiss, D., and Eckel, H., “Fundamental frequency and mission profile wearout of IGBT in DFIG converters for windpower,” Proc. EPE 2013, pp. 1–6, 2013.
  • Ma, K., Liserre, M., Blaabjerg, F., and Kerekes, T., “Thermal loading and lifetime estimation for power device considering mission profiles in wind power converter,” IEEE Trans. Power Electron., Vol. 30, No. 2, pp. 590–602, February 2015.
  • Liu, C., Blaabjerg, F., Chen, W., and Xu, D., “Stator current harmonic control with resonant controller for doubly fed induction generator,” IEEE Trans. Power Electron., Vol. 27, No. 7, pp. 3207–3220, July 2012.
  • Takahashi, R., Ichita, H., Tamura, J., Kimura, M., Ichinose, M., Futami, M., and Ide, K., “Efficiency calculation of wind turbine generation system with doubly-fed induction generator,” Proceedings of the International Conference on Electrical Machines (ICEM), pp. 1–4, 2010.
  • Liu, C., Huang, X., Chen, M., and Xu, D., “Flexible control during grid voltage of DC-link voltage for doubly fed induction generator swell,” Proceedings of of ECCE 2010, pp. 3091–3095, 2010.
  • Zhou, D., Blaabjerg, F., Lau, M., and Tonnes, M., “Optimized reactive power flow of DFIG power converters for better reliability performance considering grid codes,” IEEE Trans. Ind. Electron., Vol. 62, No. 3, pp. 1552–1562, March 2015.
  • Yamaji, H., Shimizu, T., Takano, K., and Ishii, H., “Iron loss evaluation of AC filter inductor core in a PWM inverter,” Proceedings of EPE 2009, pp. 1–8, 2009.
  • Wee, S., Shin, M., and Hyun, D., “Stator-flux-oriented control of induction motor considering iron loss,” IEEE Trans. Ind. Electron., Vol. 48, No. 3, pp. 602–608, June 2001.
  • Abo-Khalil, A.G., Park, H., and Lee, D., “Loss minimization control for doubly-fed induction generators in variable speed wind turbines,” Proceedings of IECON 2007, pp. 1109–1114, 2007.
  • Chen, B., Lu, T., Hsu, Y., Chen, W., and Lee, Z., “An analytical approach to maximum power tracking and loss minimization of a doubly fed induction generator considering core loss,” IEEE Trans. Energy Convers., Vol. 27, No. 2, pp. 449–456, June2012.
  • Zhou, D., Blaabjerg, F., Lau, M., and Tonnes, M., “Thermal profile analysis of doubly-fed induction generator based wind power converter with air and liquid cooling methods,” Proceedings of EPE 2013, pp. 1–10, 2013.
  • Zhou, D., Blaabjerg, F., Lau, M., and Tonnes, M., “Thermal behavior optimization in multi-MW wind power converter by reactive power circulation,” IEEE Trans. Ind. Appl., Vol. 50, No. 1, pp. 433–440, January 2014.
  • Amro, R., Lutz, J., and Lindemann, A., “Power cycling with high temperature swing of discrete components based on different technologies,” Proceedings of PESC 2004, pp. 2593–2598
  • IEC, “Wind turbines—part I: Design requirements,” IEC 61400-1, 3rd ed.
  • “Vestas website,” available at: http://www.vestas.com/en/wind-power-plants/wind-project-planning/siting/wind-classes.aspx?action = 3#/vestas-univers)
  • Koutroulis, E., and Blaabjerg, F., “Design optimization of transformerless grid-connected PV inverters including reliability,” IEEE Trans. Power Electron., Vol. 28, No. 1, pp. 325–335, January 2013.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.