191
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Reduction in Harmonics of BLDC Motor Drive Using Controlled LC Filter

Pages 1686-1703 | Received 20 Jan 2018, Accepted 29 Jul 2018, Published online: 09 May 2019

References

  • R. Krishnan, Electric Motor Drives: Modeling, Analysis, and Control. Upper Saddle River, NJ: Prentice-Hall, 2001.
  • R. Krishnan, Permanent Magnet Synchrounous and Brushless DC Motor Drives. Boca Raton, FL: CRC Press, 2010.
  • J. R. Hendershot, and T. J. E. Miller, Design of Brushless Permanent Magnet Machines, 2nd ed., Motor Design Books LLC, 2010.
  • I. Janpan, R. Chaisricharoen, and P. Boonyanant, “Control of the brushless DC motor in combine mode,” Procedia Engineering, vol. 32, pp. 279–285, 2012. DOI:10.1016/j.proeng.2012.01.1268.
  • F. Rodriguez, and A. Emadi, “A novel digital control technique for brushless DC motor drives,” IEEE Transactions on Industrial Electronics, vol. 54, no. 5, pp. 2365–2373, 2007. DOI:10.1109/TIE.2007.900312.
  • B. K. Bose, Power Electronics and Motor Drives: advances and Trends. Academic Press, 2010.
  • M. Z. Youssef, “Design and performance of a cost-effective BLDC drive for water pump application,” IEEE Transactions on Industrial Electronics, vol. 62, no. 5, pp. 3277–3284, 2015. DOI:10.1109/TIE.2014.2350461.
  • J. Fang, H. Li, and B. Han, “Torque ripple reduction in BLDC torque motor with nonideal back EMF,” IEEE Transactions on Power Electronics, vol. 27, no. 11, pp. 4630–4637, 2012. DOI:10.1109/TPEL.2011.2176143.
  • D.-K. Kim, K.-W. Lee, and B.-I. Kwon, “Commutation torque ripple reduction in a position sensorless brushless DC motor drive,” IEEE Transactions on Power Electronics, vol. 21, no. 6, pp. 1762–1768, 2006. DOI:10.1109/TPEL.2006.882918.
  • S. M. Shakouhi, M. Mohamadian, and E. Afjei, “Torque ripple minimisation control method for a four phase brushless DC motor with non-ideal back-electromotive force,” IET Electric Power Applications, vol. 7, no. 5, pp. 360–368, 2013. DOI:10.1049/iet-epa.2012.0269.
  • J. Karthikeyan, and R. D. Sekaran, “Current control of brushless dc motor based on a common dc signal for space operated vehicles,” International Journal of Electrical Power & Energy Systems, vol. 33, no. 10, pp. 1721–1727, 2011. DOI:10.1016/j.ijepes.2011.08.014.
  • C. Shin, C. Choi, and W. Lee, “Advance angle calculation for improvement of the torque-to-current ratio of brushless dc motor drives,” Energy Procedia, vol. 14, pp. 1410–1414, 2012. DOI:10.1016/j.egypro.2011.12.1110.
  • B.-K. Lee, T.-H. Kim, and M. Ehsani, “On the feasibility of four-switch three-phase BLDC motor drives for low cost commercial applications: topology and control,” IEEE Transactions on Power Electronics, vol. 18, no. 1, pp. 164–172, 2003.
  • M. Masmoudi, B. El Badsi, and A. Masmoudi, “DTC of B4-inverter-fed BLDC motor drives with reduced torque ripple during sector-to-sector commutations,” IEEE Transactions on Power Electronics, vol. 29, no. 9, pp. 4855–4865, 2014. DOI:10.1109/TPEL.2013.2284111.
  • S. B. Ozturk, W. C. Alexander, and H. A. Toliyat, “Direct torque control of four-switch brushless DC motor with non-sinusoidal back EMF,” IEEE Transactions on Power Electronics, vol. 25, no. 2, pp. 263–271, 2010. DOI:10.1109/TPEL.2009.2028888.
  • S. B. Ozturk, and H. A. Toliyat, “Direct torque and indirect flux control of brushless DC motor,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 2, pp. 351–360, 2011. DOI:10.1109/TMECH.2010.2043742.
  • K. Gulez, A. A. Adam, and H. Pastaci, “Torque ripple and EMI noise minimization in PMSM using active filter topology and field-oriented control,” IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 251–257, 2008. DOI:10.1109/TIE.2007.896295.
  • T. Gopalarathnam, and H. A. Toliyat, “A new topology for unipolar brushless dc motor drive with high power factor,” IEEE Transactions on Power Electronics, vol. 18, no. 6, pp. 1397–1404, 2003. DOI:10.1109/TPEL.2003.818873.
  • M. K. Pandey, A. Tripathi, and B. Dwivedi, “A technique to minimize the effect of current harmonics in a brushless dc motor drive,” Presented at the 2015 IEEE 10th Conf. Indus. Electron. Appl., Auckland, New Zealand; 19–21 Aug. 2014, pp. 702–706, IEEE, 2015. DOI:10.1109/INAGENTSYS.2014.7005723.
  • I. Kim, N. Nakazawa, S. Kim, C. Park, and C. Yu, “Compensation of torque ripple in high performance BLDC motor drives,” Control Engineering Practice, vol. 18, no. 10, pp. 1166–1172, 2010. DOI:10.1016/j.conengprac.2010.06.003.
  • C. Concari, G. Franceschini, and A. Toscani, “Vibrationless alignment algorithm for incremental encoder based BLDC drives,” Electric Power Systems Research, vol. 95, pp. 225–231, 2013. DOI:10.1016/j.epsr.2012.09.010.
  • T. G. Habetler, R. Naik, and T. A. Nondahl, “Design and implementation of an inverter output LC filter used for dv/dt reduction,” in IEEE Transactions on Power Electronics, vol. 17, no. 3, pp. 327–331, May 2002. DOI:10.1109/TPEL.2002.1004240.
  • H.-S. Kim, and S.-K. Sul, “A novel filter design for output LC filters of PWM inverters,” Journal of Power Electronics, vol. 11, no. 1, pp. 74–81, 2011. DOI:10.6113/JPE.2011.11.1.074.
  • A. Houari, H. Renaudineau, J.-P. Martin, S. Pierfederici, and F. Meibody-Tabar, “Flatness-based control of three-phase inverter with output LC filter,” IEEE Transactions on Industrial Electronics, vol. 59, no. 7, pp. 2890–2897, 2012. DOI:10.1109/TIE.2011.2170396.
  • Y. Sozer, D. A. Torrey, and S. Reva, “New inverter output filter topology for PWM motor drives,” IEEE Transactions on Power Electronics, vol. 15, no. 6, pp. 1007–1017, 2000. DOI:10.1109/63.892815.
  • A. Sathyan, N. Milivojevic, Y.-J. Lee, M. Krishnamurthy, and A. Emadi, “An FPGA-based novel digital PWM control scheme for BLDC motor drives,” IEEE Transactions on Industrial Electronics, vol. 56, no. 8, pp. 3040–3049, 2009.
  • C. S. Joice, S. Paranjothi, and V. J. S. Kumar, “Digital control strategy for four quadrant operation of three phase BLDC motor with load variations,” IEEE Transactions on Industrial Informatics, vol. 9, no. 2, pp. 974–982, 2013. DOI:10.1109/TII.2012.2221721.
  • M. M. Kamal, L. Mathew and S. Chatterji, “Speed control of brushless DC motor using intelligent controllers,” 2014 Students Conference on Engineering and Systems, Allahabad, pp. 1–5, 2014. DOI:10.1109/SCES.2014.6880121.
  • R. Manikandan, and R. Arulmozhiyal, “Position control of DC servo drive using fuzzy logic controller,” 2014 International Conference on Advances in Electrical Engineering (ICAEE), Vellore, pp. 1–5. 2014. DOI:10.1109/ICAEE.2014.6838474.
  • Y. A. Almatheel, and A. Abdelrahman, “Speed control of dc motor using fuzzy logic controller,” Int. Conf. Commun., Control, Comput. Electron. Eng., Khartoum, Sudan; 16–18 Jan. 2017, pp. 1–8, IEEE, 2017. DOI:10.1109/ICCCCEE.2017.7867673.
  • M. A. Akbar et al., “Simulation of fuzzy logic control for dc servo motor using arduino based on matlab/simulink,” IEEE Int. Conf. Intell. Auton. Agents, Netw. Syst., Bandung, Indonesia; 19–21 Aug. 2014, pp. 42–46, IEEE, 2014. DOI:10.1109/INAGENTSYS.2014.7005723.
  • P. Andrada Gascón, M. Torrent Burgués, J. I. Perat Benavides, and B. Blanqué Molina, “Power losses in outside-spin brushess dc motor,” Renewable Energy and Power Quality Journal, no. vol. 1, no. 2, pp. 507–501, 2004. DOI:10.24084/repqj02.320.
  • A. Młot, M. Korkosz, and M. Łukaniszyn, “Iron loss and eddy-current loss analysis in a low-power bldc motor with magnet segmentation,” Archives of Electrical Engineering, vol. 61, no. 1, pp. 33–46, 2012. DOI:10.2478/v10171-012-0003-5.
  • D. Miljavec, and B. Zidarič, “Eddy current losses in permanent magnets of the bldc machine,” COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 26, no. 4, pp. 1095–1104, 2007. DOI:10.1108/03321640710756410.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.