References
- A. Shinohara, Y. Inoue, S. Morimoto, and M. Sanada, “Direct calculation method of reference flux linkage for maximum torque per ampere control in DTC-based IPMSM drives,” IEEE Trans. Power Electron, vol. 32, no. 3, pp. 2114–2122, 2017.
- J. S. Lee, and R. D. Lorenz, “Robustness analysis of deadbeat direct torque and flux control for IPMSM drives,” IEEE Trans. Ind. Electro, vol. 63, no. 5, pp. 2775–2784, 2016.vol
- D. Xu, J. Liu, S. Zhang, and H. Wei, “Elimination of low-speed vibration in vector-controlled permanent magnet synchronous motor by real-time adjusted extended kalman filter,” Electric Power Components and Systems, vol. 43, no. 20, pp. 2276–2287, 2015.
- S. Bolognani, S. Calligaro, and R. Petrella, “Design issues and estimation errors analysis of back-EMF-based position and speed observer for SPM synchronous motors,” IEEE J. Emerg. Sel. Topics Power Electron, vol. 2, no. 2, pp. 159–170, 2014.
- G. Schoonhoven, and M. N. Uddin, “Harmonic injection-based adaptive control of IPMSM motor drive for reduced motor current THD,” IEEE Trans. Ind. Appl, vol. 53, no. 1, pp. 483–491, 2017.
- G. Xie, K. Lu, S. K. Dwivedi, J. R. Rosholm, and F. Blaabjerg, “Minimum-voltage vector injection method for sensorless control of PMSM for low-speed operations,” IEEE Trans. Power Electron, vol. 31, no. 2, pp. 1785–1794, 2016.
- A. Consoli, A. Gaeta, G. Scarcella, G. Scelba, and A. Testa, “Lowamplitude carrier signal injection-based techniques for sensorless control of permanent magnet drives,” Electric Power Components and Systems, vol. 40, no. 4, pp. 369–382, 2012.
- S. A. Odhano, P. Giangrande, R. I. Bojoi, and C. Gerada, “Self-commissioning of interior permanent-magnet synchronous motor drives with high-Frequency current injection,” IEEE Trans. Ind. Appl., vol. 50, no. 5, pp. 3295–3303, 2014.
- D. D. S. Medjmadj, C. D. M.Mostefai, and A. Arias, “PMSM drive position estimation: contribution to the high-frequency injection voltage selection issue,” IEEE Trans. Energy Convers, vol. 30, no. 1, pp. 349–358, 2015.
- S-kSul Young-Doo Yoon, “Sensorless control for induction machines based on Square-Wave voltage injection,” IEEE Trans. Power Electron, vol. 29, no. 7, pp. 3637–3645, 2014.
- X. Wu et al., “Initial rotor position detection of sensorless interior PMSM with Square wave voltage injection,” IEEE Trans. Magn., vol. 53, no. 11, pp. 1, 2017.
- R. Ni, D. Xu, F. Blaabjerg, K. Lu, G. Wang, and G. Zhang, “Square wave voltage injection algorithm for PMSM position sensorless control with high robustness to voltage errors,” IEEE Trans. Power Electron, vol. 32, no. 7, pp. 5425–5437, 2017.
- P. L. Xu, and Z. Q. Zhu, “Novel square wave signal injection method using zero sequence voltage for sensorless control of PMSM drives,” IEEE Trans. Ind. Electronics., vol. 63, no. 12, pp. 7444–7454, 2016.
- J. M. Liu, and Z. Q. Zhu, “Sensorless control strategy by Square-Waveform High-Frequency pulsating signal injection into stationary reference frame,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 2, no. 2, pp. 171–178, 2014.