Thermal Analysis of Power Transformer Using an Improved Dynamic Thermal Equivalent Circuit Model

References

• A. Santisteban et al., “Numerical analysis of the hot-spot temperature of a power transformer with alternative dielectric liquids,” IEEE Trans. Dielectr. Electr. Insul., vol. 24, no. 5, pp. 3226–3235, 2017. DOI: 10.1109/TDEI.2017.006228.
   Web of Science ®Google Scholar
• J. Faiz, M. Mikhak-Beyranvand, B. Rezaeealam, A. Rezaei-Zare, and M. Jafarboland, “Thermal analysis of power transformers under unbalanced supply voltage,” IET Electr. Power Appl., vol. 13, no. 4, pp. 503–512, 2019. DOI: 10.1049/iet-epa.2018.5799.
   Web of Science ®Google Scholar
• G. Swift, T. S. Molinski, and W. Lehn, “A fundamental approach to transformer thermal modeling. I. Theory and equivalent circuit,” IEEE Trans. Power Deliv., vol. 16, no. 2, pp. 171–175, 2001. DOI: 10.1109/61.915478.
   Web of Science ®Google Scholar
• D. Susa, M. Lehtonen, and H. Nordman, “Dynamic thermal modelling of power transformer,” IEEE Trans. Power Deliv., vol. 20, no. 1, pp. 197–204, 2005. DOI: 10.1109/TPWRD.2004.835255.
   Web of Science ®Google Scholar
• D. Susa and M. Lehtonen, “Dynamic thermal modeling of power transformers: further development-part I,” IEEE Trans. Power Deliv., vol. 21, no. 4, pp. 1961–1970, 2006. DOI: 10.1109/TPWRD.2005.864069.
   Google Scholar
• D. Susa and H. Nordman, “A simple model for calculating transformer hot-spot temperature,” IEEE Trans. Power Deliv., vol. 24, no. 3, pp. 1257–1265, 2009. DOI: 10.1109/TPWRD.2009.2022670.
   Web of Science ®Google Scholar
• W. Tang, Q. Wu, and Z. Richardson, “Equivalent heat circuit based power transformer thermal model,” IEE Proc. Electr. Power Appl., vol. 149, no. 2, pp. 87–92, 2002. DOI: 10.1049/ip-epa:20020290.
   Google Scholar
• W. Tang, Q. Wu, and Z. Richardson, “A simplified transformer thermal model based on thermal-electric analogy,” IEEE Trans. Power Deliv., vol. 19, no. 3, pp. 1112–1119, 2004. DOI: 10.1109/TPWRD.2003.822968.
   Web of Science ®Google Scholar
• L. Zhu et al., “An improved dynamic thermal circuit model for transformers and its application to evaluate capacity increase,” Electr. Power Compon. Syst., vol. 45, no. 13, pp. 1440–1449, 2017. DOI: 10.1080/15325008.2017.1352629.
   Web of Science ®Google Scholar
• I. Iskender, and A. Mamizadeh, “An improved nonlinear thermal model for MV/LV prefabricated oil-immersed power transformer substations,” Electr. Eng., vol. 93, no. 1, pp. 9–22, 2011. DOI: 10.1007/s00202-010-0186-y.
   Web of Science ®Google Scholar
• A. Najafi and I. Iskender, “An improved thermal model for distribution transformer under unbalanced voltage conditions,” Int. J. Therm. Sci., vol. 104, pp. 373–385, 2016. DOI: 10.1016/j.ijthermalsci.2015.11.014.
   Web of Science ®Google Scholar
• J. C. Olivares-Galván, P. S. Georgilakis, and R. Ocon-Valdez, “A review of transformer losses,” Electr. Power Compon. Syst., vol. 37, no. 9, pp. 1046–1062, 2009. DOI: 10.1080/15325000902918990.
   Web of Science ®Google Scholar
• M. Moghaddami, A. I. Sarwat, and F. de Leon, “Reduction of stray loss in power transformers using horizontal magnetic wall shunts,” IEEE Trans. Magn., vol. 53, no. 2, pp. 1–7, 2017. DOI: 10.1109/TMAG.2016.2611479.
   Web of Science ®Google Scholar
• N. Takahashi, T. Sakura, and Z. Cheng, “Nonlinear analysis of eddy current and hysteresis losses of 3-D stray field loss model (Problem 21),” IEEE Trans. Magn., vol. 37, no. 5, pp. 3672–3675, 2001.
   Web of Science ®Google Scholar
• H. V. Sande et al., “An effective reluctivity model for nonlinear and anisotropic materials in time-harmonic finite element computations,” IEEE Trans. Magn., vol. 41, no. 5, pp. 1508–1511, 2005. DOI: 10.1109/TMAG.2005.845077.
   Web of Science ®Google Scholar
• I. R. Ciric and F. I. Hantila, “An efficient harmonic method for solving nonlinear time-periodic eddy-current problems,” IEEE Trans. Magn., vol. 43, no. 4, pp. 1185–1188, 2007. DOI: 10.1109/TMAG.2006.890952.
   Web of Science ®Google Scholar
• G. Paoli, O. Biro, and G. Buchgraber, “Complex representation in nonlinear time harmonic eddy current problems,” IEEE Trans. Magn., vol. 534, no. 5, pp. 2625–2628, 1998. DOI: 10.1109/20.717607.
   Google Scholar
• A. Ayachit and M. K. Kazimierczuk, “Sensitivity of effective relative permeability for gapped magnetic cores with fringing effect,” IET Circuits Devices Syst., vol. 11, no. 3, pp. 209–215, 2017. DOI: 10.1049/iet-cds.2016.0410.
   Web of Science ®Google Scholar
• “IEEE guide for loading mineral-oil-immersed transformers and step-voltage regulators,” IEEE Std C57.91-2011. DOI: 10.1109/IEEESTD.1996.79665.
   Google Scholar
• B. R. Sathyanarayana, T. H. Gerald, and L. D. Michael, “Distribution transformer life assessment with ambient temperature rise projections,” Electr. Power Compon. Syst., vol. 37, no. 9, pp. 1005–1013, 2009. DOI: 10.1080/15325000902918875.
   Web of Science ®Google Scholar
• Z. R. Radakovic and M. S. Sorgic, “Basics of detailed thermal-hydraulic model for thermal design of oil power transformers,” IEEE Trans. Power Deliv., vol. 25, no. 2, pp. 790–802, 2010. DOI: 10.1109/TPWRD.2009.2033076.
   Web of Science ®Google Scholar
• R. Lecuna et al., “Thermal-fluid characterization of alternative liquids of power transformers: a numerical approach,” IEEE Trans. Dielectr. Electr. Insul., vol. 22, no. 5, pp. 2522–2529, 2015.
   Web of Science ®Google Scholar
• D. Kalic, Z. Radakovic, Z. Lazarevic, and R. Radosavljevic, “On the determination of characteristic temperature in power oil transformers during transient states,” Archiv Fur Elektrotechnik, vol. 76, no. 6, pp. 457–468, 1993.
   Google Scholar
• L. Susnjic, Z. Haznadar, and Z. Valkovic, “3D finite-element determination of stray losses in power transformer,” Electr. Power Syst. Res., vol. 78, no. 10, pp. 1814–1818, 2008. DOI: 10.1016/j.epsr.2008.03.009.
   Web of Science ®Google Scholar
• M. Mikhak-Beyranvand and B. Rezaeealam, “Finite element study of ferroresonance in single-phase transformers considering magnetic hysteresis,” J. Magn., vol. 22, no. 2, pp. 196–202, 2017. DOI: 10.4283/JMAG.2017.22.2.196.
   Web of Science ®Google Scholar
• S. V. Kulkarni, and S. Khaparde, Transformer Engineering: Design, Technology, and Diagnostics. Boca Ratun, FL, USA: CRC Press, 2012.
   Google Scholar
• M. Mikhak-Beyranvand, B. Rezaeealam, J. Faiz, and A. Rezaei-Zare, “Impacts of ferroresonance and inrush current forces on transformer windings,” IET Electr. Power Appl., vol. 13, no. 7, pp. 914–921, 2019. DOI: 10.1049/iet-epa.2018.5193.
   Web of Science ®Google Scholar
• J. Olivares et al., “2D finite-element determination of tank wall losses in pad-mounted transformers,” Electr. Power Syst. Res., vol. 71, no. 2, pp. 179–185, 2004. DOI: 10.1016/S0378-7796(04)00041-0.
   Web of Science ®Google Scholar
• X. Liu, Y. Yang, and F. Yang, “Numerical research on the losses characteristic and hot-spot temperature of laminated core joints in transformer,” Appl. Therm. Eng., vol. 10, pp. 49–61, 2017. DOI: 10.1016/j.applthermaleng.2016.08.158.
   Google Scholar
• Z. Cheng, N. Takahashi, and B. Forghani, “TEAM problem 21 family (V. 2009).” (Revision IEEE Std C57.91-1995), Approved by the International Compumag Society Board at Compumag-2009, Florianópolis, Brazil, pp. 1–16, 2009.
   Google Scholar
• Steel, A. “Grain oriented electrical steels–M-2 M-3 M-3X LITE CARLITE GOES–M-2 M-3 M-4 M-5 M-6 MILL-ANNEAL GOES.” Product Data Bulletin, [Online]. Available: http://www.aksteel.com/pdf/markets_products/electrical/AK%20CARLITE%20Lite.20042413.
   Google Scholar
• M. Ghazizadeh, J. Faiz, and H. Oraee, “Derating of distribution transformers under non-linear loads using a combined analytical-finite elements approach,” IET Electr. Power Appl., vol. 10, no. 8, pp. 779–787, 2016. DOI: 10.1049/iet-epa.2016.0103.
   Web of Science ®Google Scholar
• F. Torriano, P. Picher, and M. Chaaban, “Numerical investigation of 3D flow and thermal effects in a disc-type transformer winding,” Appl. Therm. Eng., vol. 40, pp. 121–131, 2012. DOI: 10.1016/j.applthermaleng.2012.02.011.
   Web of Science ®Google Scholar