108
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Enhanced Control Algorithm in PMSMs with Machine Current Sensor FDI and Current Management for Hardware Protection

Pages 1585-1597 | Received 10 Mar 2019, Accepted 13 Oct 2019, Published online: 09 Dec 2019

References

  • M. Tezcan, E. Mese, I. Ustoglu, and M. Ayaz, “Analytical modeling of dual winding surface-mounted permanent magnet synchronous machine for hybrid electric vehicle accessory drive systems,” Electr. Power Compon. Syst., vol. 45, no. 12, pp. 1353–1369, Sept. 2017. DOI: 10.1080/15325008.2017.1336656.
  • S. Li, D. Han, and B. Sarlioglu, “A double-ended converter system with two different DC-buses using open winding permanent magnet machine for traction applications,” Electr. Power Compon. Syst., vol. 45, no. 15, pp. 1729–1738, Dec. 2017. DOI: 10.1080/15325008.2017.1373715.
  • C. Guo, S. Huang, J. Wang, and Y. Feng, “Research of cryogenic permanent magnet synchronous motor for submerged liquefied natural gas pump,” IEEE Trans. Energy Convers., vol. 33, no. 4, pp. 2030–2039. DOI: 10.1109/TEC.2018.2868954.
  • B. Singh and S. Murshid, “A grid-interactive permanent-magnet synchronous motor-driven solar water-pumping system,” IEEE Trans. Ind. Appl., vol. 54, no. 5, pp. 5549–5561, Sept./Oct. 2018. DOI: 10.1109/TIA.2018.2860564.
  • K. Ma, L. Tutelea, I. Boldea, D. M. Ionel, and F. Blaabjerg, “Power electronic drives, controls, and electric generators for large wind turbines–an overview,” Electr. Power Compon. Syst., vol. 43, no. 12, pp. 1406–1421, Jul. 2015. DOI: 10.1080/15325008.2015.1037470.
  • K. Rothenhagen and F. W. Fuchs, “Current sensor fault detection, isolation, and reconfiguration for doubly fed induction generators,” IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4239–4245, Oct. 2009. DOI: 10.1109/TIE.2009.2017562.
  • Y. Jeong, S. Sul, S. Schulz, and N. Patel, “Fault detection and fault-tolerant control of interior permanent-magnet motor drive system for electric vehicle,” IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 46–51, Jan./Feb. 2005. DOI: 10.1109/TIA.2004.840947.
  • Y. Yu, Y. Zhao, B. Wang, X. Huang, and D. Xu, “Current sensor fault diagnosis and tolerant control for VSI-based induction motor drives,” IEEE Trans. Power Electron., vol. 33, no. 5, pp. 4238–4248, May, 2018. DOI: 10.1109/TPEL.2017.2713482.
  • S. K. Kommuri, S. B. Lee, and K. C. Veluvolu, “Robust sensor-fault-tolerance with sliding mode estimation and control for PMSM drives,” IEEE/ASME Trans. Mechatron., vol. 23, no. 1, pp. 17–28, Feb. 2018. DOI: 10.1109/TMECH.2017.2783888.
  • F. R. Salmasi, “A self-healing induction motor drive with model free sensor tampering and sensor fault detection, isolation, and compensation,” IEEE Trans. Ind. Electron., vol. 64, no. 8, pp. 6105–6115, Aug. 2017. DOI: 10.1109/TIE.2017.2682035.
  • C. Wu, C. Guo, Z. Xie, F. Ni, and H. Liu, “A signal-based fault detection and tolerance control method of current sensor for PMSM drive,” IEEE Trans. Ind. Electron., vol. 65, no. 12, pp. 9646–9657, Dec. 2018. DOI: 10.1109/TIE.2018.2813991.
  • I. Jlassi, J. O. Estima, S. K. E. Khil, N. M. Bellaaj, and A. J. M. Cardoso, “A robust observer-based method for IGBTs and current sensors fault diagnosis in voltage-source inverters of PMSM drives,” IEEE Trans. Ind. Appl., vol. 53, no. 3, pp. 2894–2905, May/Jun. 2017. DOI: 10.1109/TIA.2016.2616398.
  • S. Saha, M. E. Haque, and M. A. Mahmud, “Diagnosis and mitigation of sensor malfunctioning in a permanent magnet synchronous generator based wind energy conversion system,” IEEE Trans. Energy Convers., vol. 33, no. 3, pp. 938–948, Sept. 2018. DOI: 10.1109/TEC.2017.2784824.
  • M. Manohar and S. Das, “Current sensor fault-tolerant control for direct torque control of induction motor drive using flux-linkage observer,” IEEE Trans. Ind. Inf., vol. 13, no. 6, pp. 2824–2833, Dec. 2017. DOI: 10.1109/TII.2017.2714675.
  • H. Li, Y. Qian, S. Asgarpoor, and H. Sharif, “PMSM current sensor FDI based on DC link current estimation,” in Proc. IEEE 88th Veh Technol Conf., Aug. 2018, pp. 1–5.
  • V. Nguyen et al. “A method for incipient interturn fault detection and severity estimation of induction motors under inherent asymmetry and voltage imbalance,” IEEE Trans. Transp. Electrif., vol. 3, no. 3, pp. 703–715, Sept. 2017. DOI: 10.1109/TTE.2017.2726351.
  • S. Bolognani, R. Petrella, A. Prearo, and L. Sgarbossa, “Automatic tracking of MTPA trajectory in IPM motor drives based on AC current injection,” IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 105–114, Jan./Feb. 2011. DOI: 10.1109/TIA.2010.2090842.
  • T. Windisch and W. Hofmann, “Automatic MTPA tracking using online simplex algorithm for IPMSM drives in vehicle applications”, in Proc. IEEE Veh Power and Propul Conf., 2014, pp. 1–6.
  • Y. Mohamed and T. Lee, “Adaptive self-tuning MTPA vector controller for IPMSM drive system,” IEEE Trans. Energy Convers., vol. 21, no. 3, pp. 636–644, Sept. 2006. DOI: 10.1109/TEC.2006.878243.
  • P. Pramod, K. Namburi, and J. Kleinau, “Current capability limiting of DC machines,” US Patent Appl. 15/603671, Nov. 30, 2017.
  • H. Li, Y. Qian, S. Asgarpoor, and J. Bradley, “PMSM current management with overcurrent regulation,” in Proc. 34th Annual IEEE Appl. Power Electron. Conf. Expo. Mar. 2019, pp. 1–5.
  • J. Lemmens, P. Vanassche, and J. Driesen, “PMSM drive current and voltage limiting as a constraint optimal control problem,” IEEE Trans. Emerg. Sel. Topics Power Electron., vol. 3, no. 2, pp. 326–338, Jun. 2015. DOI: 10.1109/JESTPE.2014.2321111.
  • B. Wu, Y. Lang, N. Zargari, and S. Kouro, Power Conversion and Control of Wind Energy Systems. Hoboken, NJ: Wiley-IEEE Press, Aug. 2011.
  • Powerex, Appl. Note, “General considerations: IGBT & IPM modules,” Jan. 2010.
  • P. Krause, O. Wasynczuk, and S. Sudhoff, Analysis of Electric Machinery and Drive Systems. 2nd ed. Hoboken, NJ: Wiley-IEEE Press, 2002.
  • R. Romero-Troncoso, “Multirate signal processing to improve FFT-based analysis for detecting faults in induction motors,” IEEE Trans. Ind. Inf., vol. 13, no. 3, pp. 1291–1300, Jun. 2017.
  • D. L. Perez and J. A. Daviu, “Application of infrared thermography to failure detection in industrial induction motors: case stories,” IEEE Trans. Ind. Appl., vol. 53, no. 3, pp. 1901–1908, May/Jun. 2017.
  • P. F. Odgaard, J. Stoustrup, and M. Kinnaert, “Fault-tolerant control of wind turbines–a benchmark model,” IEEE Trans. Control Syst. Technol., vol. 21, no. 4, pp. 1168–1182, Jul. 2013. DOI: 10.1109/TCST.2013.2259235.
  • N. Laouti, N. Sheibat-Othman, and S. Othman, “Support vector machines for fault detection in wind turbines,” Proc. IFAC World Congr., vol. 44, no. 1, pp. 7067–7072, Aug.–Sep. 2011. DOI: 10.3182/20110828-6-IT-1002.02560.
  • X. Zhang, Q. Zhang, S. Zhao, R. M. G. Ferrari, M. M. Polycarpou, and T. Parisini, “Fault detection and isolation of the wind turbine benchmark: An estimation-based approach,” Proc. IFAC World Congr., vol. 44, no. 1, pp. 8295–8300, Aug.–Sep. 2011. DOI: 10.3182/20110828-6-IT-1002.02808.
  • A. A. Ozdemir, P. Seiler, and G. J. Balas, “Wind turbine fault detection using counter-based residual thresholding,” Proc. IFAC World Congr., vol. 44, no. 1, pp. 8289–8294, Aug.–Sep. 2011. DOI: 10.3182/20110828-6-IT-1002.01758.
  • P. W. Chen, S. X. Ding, A. H. A. Sari, A. Naik, A. Q. Khan, and S. Yin, “Observer-based FDI schemes for wind turbine benchmark,” Proc. IFAC World Congr., vol. 44, no. 1, pp. 7073–7078, Aug.–Sep. 2011. DOI: 10.3182/20110828-6-IT-1002.03469.
  • C. Svard and M. Nyberg, “Automated design of an FDI-system for the wind turbine benchmark,” Proc. IFAC World Congr., vol. 44, no. 1, pp. 8307–8315, Aug.–Sep. 2011. DOI: 10.3182/20110828-6-IT-1002.00618.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.