A Novel PMSM with Optimized Asymmetric Eccentric Air-Gap for High-Power Electric Motorcycle

References

• K. T. Chau, W. Cui and J. Z. Jiang, “Design of permanent magnet brushless motors with asymmetric air-gap for electric vehicles,” J. Appl. Phys., vol. 99, no. 8, pp. 08R322, 2006. DOI: 10.1063/1.2173615.
   Web of Science ®Google Scholar
• A. Damiano, A. Floris, G. Fois, I. Marongiu, M. Porru and A. Serpi, “Design of a high-speed ferrite-based brushless DC machine for electric vehicles,” IEEE Trans. Ind. Appl., vol. 53, no. 5, pp. 4279–4287, Sep. 2017. DOI: 10.1109/TIA.2017.2699164.
   Web of Science ®Google Scholar
• X. Liu, H. Chen, J. Zhao and A. Belahcen, “Research on the performances and parameters of interior PMSM used for electric vehicles,” IEEE Trans. Ind. Electron, vol. 63, no. 6, pp. 3533–3545, Jun. 2016. DOI: 10.1109/TIE.2016.2524415.
   Web of Science ®Google Scholar
• X. Liu, H. Hu and J. Zhao, “Armature reaction field and inductance calculation of ironless BLDC motor,” IEEE Trans. Magn., vol. 52, no. 2, pp. 1–14, Feb. 2016. DOI: 10.1109/TMAG.2015.2489605.
   Web of Science ®Google Scholar
• P. Liang, Y. Pei, F. Chai, Y. Bi and S. Cheng, “An improved method for armature-reaction magnetic field calculation of interior permanent magnet motors,” IEEE Trans. Magn., vol. 52, no. 7, pp. 1–1, Jul. 2016. DOI: 10.1109/TMAG.2016.2521873.
   Web of Science ®Google Scholar
• M. Farshadnia, M. A. M. Cheema, R. Dutta and F. John, “Analytical modeling of armature reaction air-gap flux density considering the non-homogeneously saturated rotor in a fractional-slot concentrated-wound IPM machine,” IEEE Trans. Magn., vol. 53, no. 2, pp. 1–12, Feb. 2017. DOI: 10.1109/TMAG.2016.2623797.
   Web of Science ®Google Scholar
• Y. X. Li, Z. Q. Zhu and G. J. Li, “Influence of stator topologies on average torque and torque ripple of fractional-slot SPM machines with fully closed slots,” IEEE Trans. Ind. Appl, vol. 54, no. 3, pp. 2151–2164, Jun. 2018. DOI: 10.1109/TIA.2018.2799178.
   Web of Science ®Google Scholar
• K. H. Shin, H. W. Cho, S. H. Lee and J. Y. Choi, “Armature reaction field and inductance calculations for a permanent magnet linear synchronous machine based on subdomain model,” IEEE Trans. Magn, vol. 53, no. 6, pp. 1–4, Jun. 2017. DOI: 10.1109/TMAG.2017.2665661.
   Web of Science ®Google Scholar
• G. Choi and T. Jahns, “Analysis and design recommendations to mitigate demagnetization vulnerability in surface PM synchronous machines,” IEEE Trans. Ind. Appl, vol. 54, no. 2, pp. 1–1, Mar. 2018.
   Web of Science ®Google Scholar
• S. Morimoto, Y. Takeda, T. Hirasa and K. Taniguchi, “Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity,” IEEE Trans. Ind. Appl, vol. 26, no. 5, pp. 866–871, Sep. 1990. DOI: 10.1109/28.60058.
   Web of Science ®Google Scholar
• K. Abbaszadeh and F. R. Alam, “On-load field component separation in surface-mounted permanent-magnet motors using an improved conformal mapping method,” IEEE Trans. Magn., vol. 52, no. 2, pp. 1–12, Feb. 2016. DOI: 10.1109/TMAG.2015.2493150.
   Web of Science ®Google Scholar
• W. Ren, Q. Xu and Q. Li, “Asymmetrical V-shape rotor configuration of an interior permanent magnet machine for improving torque characteristics,” IEEE Trans. Magn., vol. 51, no. 11, pp. 1–4, Nov. 2015. DOI: 10.1109/TMAG.2015.2450931.
   Web of Science ®Google Scholar
• Y. H. Jung, M. S. Lim, M. H. Yoon, J. S. Jesong and J. P. Hong, “Torque ripple reduction of IPMSM applying asymmetric rotor shape under certain load condition,” IEEE Trans. Energy Convers, vol. 33, no. 1, pp. 333–340, Mar. 2018. DOI: 10.1109/TEC.2017.2752753.
   Web of Science ®Google Scholar
• Y. Li, J. W. Xing, T. B. Wang and Y. P. Lu, “Programmable design of magnet shape for permanent-magnet synchronous motors with sinusoidal back EMF waveforms,” IEEE Trans. Magn, vol. 44, no. 9, pp. 2163–2169, Sep. 2008.
   Web of Science ®Google Scholar
• F. Chai, P. X. Liang, Y. L. Pei and S. K. Cheng, “Magnet shape optimization of surface-mounted permanent-magnet motors to reduce harmonic iron losses,” IEEE Trans. Magn, vol. 52, no. 7, pp. 1–4, Jul. 2016. DOI: 10.1109/TMAG.2016.2524010.
   Web of Science ®Google Scholar
• W. Zhao, F. Zhao, T. A. Lipo and B. Kwon, “Optimal design of a novel V-type interior permanent magnet motor with assisted barriers for the improvement of torque characteristics,” IEEE Trans. Magn, vol. 50, no. 11, pp. 1–4, Nov. 2014. DOI: 10.1109/TMAG.2014.2330339.
   Web of Science ®Google Scholar
• N. J. Tang and I. Brown, “A systematic approach for developing electric machine windings with suppressed MMF space harmonics,” J. Electr. Power Comp. Syst, vol. 45, no. 20, pp. 2327–2338, Jan. 2017. DOI: 10.1080/15325008.2017.1378950.
   Web of Science ®Google Scholar
• G. J. Li, Z. Q. Zhu, X. Y. Ma and G. W. Jewell, “Comparative study of torque production in conventional and mutually coupled SRMs using frozen permeability,” IEEE Trans. Magn, vol. 52, no. 6, pp. 1–9, Jun. 2016. DOI: 10.1109/TMAG.2016.2516967.
   Web of Science ®Google Scholar