Investigation of Main and Secondary Transformers on Mitigation of Voltage Sags, Swells and Interruptions in Unbalanced Medium Voltage Distribution Systems

References

• J. Y. Chan, J. V. Milanovic and A. Delahunty, “Risk-based assessment of financial losses due to voltage sag,” IEEE Trans. Power Deliv., vol. 26, no. 2, pp. 492–500, Apr. 2011.
   Web of Science ®Google Scholar
• Agência Nacional de Energia Elétrica, “Procedimentos de Distribuição de Energia Elétrica no Sistema Elétrico Nacional (PRODIST).” Module 8, 10th ed., pp. 19–21, Jan. 2018.
   Google Scholar
• M. H. J. Bollen and I. Y.-H. Gu, Signal Processing of Power Quality Disturbances. Piscataway, NJ: McGraw-Hill, IEEE Press Series on Power Engineering, 2006, pp. 662.
   Google Scholar
• M. F. McGranaghan, D. R. Mueller and M. J. Samotyj, “Voltage sags in industrial systems,” IEEE Trans. Ind. Appl., vol. 29, no. 2, pp. 397–403, Mar./Apr. 1993.
   Web of Science ®Google Scholar
• Institute of Electrical and Electronics Engineers, “IEEE guide for identifying and improving voltage quality in power systems,” IEEE Std 1250-2018 (Revision of IEEE Std 1250-2011), pp. 1–61, Nov. 2018.
   Google Scholar
• M. H. J. Bollen, Understanding Power Quality Problems – Voltage Sags and Interruptions. New York, NY: IEEE Press Series on Power Engineering, 1999, pp. 543.
   Google Scholar
• C. Becker et al., “Proposed chapter 9 for predicting voltage sags (dips) in revision to IEEE Std 493, the Gold Book,” IEEE Trans. Ind. Appl., vol. 30, no. 3, pp. 805–821, May-Jun. 1994.
   Web of Science ®Google Scholar
• C. Venkatesh, D. V. S. S. S. Sarma and M. Sydulu, “Mitigation of voltage sag/swell using peak detector based pulse width modulation switched autotransformer,” Electr. Power Compon. Syst., vol. 39, no. 11, pp. 1117–1133, 2011.
   Web of Science ®Google Scholar
• P. Fernandez-Comesana, F. D. Freijedo, J. Doval-Gandoy, O. Lopez, A. G. Yepes and J. Malvar, “Mitigation of voltage sags, imbalances and harmonics in sensitive industrial loads by means of a series power line conditioner,” Electr. Power Syst. Res., vol. 84, no. 1, pp. 20–30, Oct. 2012.
   Web of Science ®Google Scholar
• A. K. Goswami, C. P. Gupta and G. K. Singh, “Minimization of voltage sag induced financial losses in distribution systems using FACTS devices,” Electr. Power Syst. Res., vol. 81, no. 3, pp. 767–774, Mar. 2011.
   Web of Science ®Google Scholar
• D. Bozalakov, T. L. Vandoorn, B. Meersman, C. Demoulias and L. Vandevelde, “Voltage dip mitigation capabilities of three-phase damping control strategy,” Electr. Power Syst. Res., vol. 121, pp. 192–199, Apr. 2015.
   Web of Science ®Google Scholar
• R. C. Leborgne, G. Olguin, J. M. C. Filho and M. H. J. Bollen, “Differences in voltage dip exposure depending upon phase-to-phase and phase-to-neutral monitoring connections,” IEEE Trans. Power Deliv., vol. 22, no. 2, pp. 1153–1159, Apr. 2007.
   Web of Science ®Google Scholar
• L. A. da Costa, Y. Mohammadi, R. C. Leborgne, and and D. S. Gazzana, “Impact evaluation of the neutral-grounding resistance on short-duration rms voltage variations,” presented at the 2020 19th Int,” Conf. Harmon. Qual. Power (ICHQP), Dubai, United Arab Emirates, Jul. 6, 2020.
   Google Scholar
• S. B. Griscom, “Grounding of power systems neutrals,” in Electrical Transmission and Distribution Reference Book, 5th ed., ABB Electric Systems Technology Institute. Raleigh, NC: ABB Electric Systems Technology Institute, 1997, pp. 643–665.
   Google Scholar
• Institute of Electrical and Electronics Engineers, “IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems-Part I: Introduction,” IEEE Std C62, vol. 92, pp. 1–38, Mar. 2017.
   Google Scholar
• E. Clarke, S. B. Crary and H. A. Peterson, “Overvoltages during power-system faults,” Trans. Am. Inst. Electr. Eng., vol. 58, no. 8, pp. 377–385, Aug. 1939.
   Google Scholar
• M. H. J. Bollen, “Characterization of voltage sags experienced by threephase adjustable-speed drives,” IEEE Trans. Power Deliv., vol. 12, no. 4, pp. 1666–1671, 1997.
   Web of Science ®Google Scholar
• G. Yaleinkaya, M. H. J. Bollen and P. A. Crossley, “Characterization of voltage sags in industrial distribution systems,” IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 682–688, Jul/Aug. 1998.
   Web of Science ®Google Scholar
• L. Zhang and M. H. J. Bollen, “Characteristic of voltage dips (sags) in power systems,” IEEE Trans. Power Deliv., vol. 15, no. 2, pp. 827–832, Apr. 2000.
   Web of Science ®Google Scholar
• M. T. Aung and J. V. Milanovic, “The influence of transformer winding connections on the propagation of voltage sags,” IEEE Trans. Power Deliv., vol. 21, no. 1, pp. 262–269, Jan. 2006.
   Web of Science ®Google Scholar
• Institute of Electrical and Electronics Engineers, “IEEE recommended practice for monitoring electric power quality,” IEEE Std 1159-2019 (Revision of IEEE Std 1159-2009), pp. 1–98, Aug. 2019.
   Google Scholar
• G. D. Ferreira, “Modelos matemáticos para otimização da confiabilidade de sistemas elétricos de distribuição com geração distribuída,” Tese de Doutorado em Engenharia Elétrica, PPGEE, UFRGS, Porto Alegre, Brazil, 2013.
   Google Scholar
• Institute of Electrical and Electronics Engineers, “IEEE standard for inverse-time characteristics equations for overcurrent relays,” IEEE Std C37.112-2018 (Revision of IEEE Std C37.112-1996), pp. 1–25, Feb. 2019.
   Google Scholar
• International Electrotechnical Commission, “Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection,” IEC 60255-127:2010, 1st ed., pp. 1–49, Apr. 2010.
   Google Scholar
• T. Short, Electric Power Distribution Handbook, 2nd ed. Boca Raton, FL: CRC, 2014, pp. 762.
   Google Scholar
• MATHWORKS, “MATLAB function reference”. Available: https://www.mathworks.com/help/matlab/. Accessed: Jun. 18, 2019.
   Google Scholar
• Institute of Electrical and Electronics Engineers, “IEEE PES AMPS DSAS test feeder working group,” IEEE PES. Available: http://sites.ieee.org/pes-testfeeders/resources/. Accessed Jun. 18, 2019.
   Google Scholar
• J. J. Burke and D. J. Lawre, “Characteristics of fault currents on distribution systems,” IEEE Trans. Power Appl. Syst, vol. PAS-103, no. 1, pp. 1–6, Jan. 1984.
   Web of Science ®Google Scholar
• J. H. Jürgensen, L. Nordström and P. Hilber, “Individual failure rates for transformers within a population based on diagnostic measures,” Electr. Power Syst. Res., vol. 141, pp. 354–362, Sep. 2016.
   Web of Science ®Google Scholar
• J. Faiz and R. Heydarabadi, “Diagnosing power transformers faults,” Russ. Electr. Eng., vol. 85, no. 12, pp. 785–793, Nov. 2014.
   Google Scholar
• R. Das, “Determining the locations of faults in distribution systems,” Ph.D. Thesis, Dept. of Elec. Eng., Univ. of Saskatchewan, Saskatoon, Canada, 1998.
   Google Scholar
• S. H. Horowitz and A. G. Phadke, Power Systems Relaying, 4th ed. Chennai, India: John Wiley & Sons, 2014, 398 p.
   Google Scholar