Optimizing Energy Utilization in the Weaving Industry: Advanced Electrokinetic Solutions with Modified Piezo Matrix and Super Lift Luo Converter

References

• A. Çay, “Energy consumption and energy saving potential in clothing industry,” Energy, vol. 159, pp. 74–85, 2018. DOI: 10.1016/j.energy.2018.06.128.
   Web of Science ®Google Scholar
• L. Peng et al., “Energy efficiency and influencing factor analysis in the overall Chinese textile industry,” Energy, vol. 93, pp. 1222–1229, 2015. DOI: 10.1016/j.energy.2015.09.075.
   Web of Science ®Google Scholar
• L. Zhang, M. Y. Leung, S. Boriskina, and X. Tao, “Advancing life cycle sustainability of textiles through technological innovations,” Nat. Sustain., vol. 6, no. 3, pp. 243–253, 2023. DOI: 10.1038/s41893-022-01004-5.
   Web of Science ®Google Scholar
• “Manual on Energy Conservation in Textile Cluster,” 2019.
   Google Scholar
• V. Santhosh and K. Poorna, “A study on electricity problem in powerloom units (special reference with Coimbatore District),” Paripex-Indian J. Res., vol. 11, pp. 30–31, 2014.
   Google Scholar
• Y. Dhayaneswaran and L. Ashokkumar, “A study on energy conservation in textile industry,” J. Inst. Eng. India Ser. B, vol. 94, no. 1, pp. 53–60, 2013. DOI: 10.1007/s40031-013-0040-5.
   Google Scholar
• M. Safaei, H. A. Sodano and S. R. Anton, “A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018),” Smart Mater. Struct., vol. 28, no. 11, pp. 113001, 2019. DOI: 10.1088/1361-665X/ab36e4.
   Web of Science ®Google Scholar
• A. Hasanbeigi, “Energy-efficiency improvement opportunities for the textile industry,” no LBNL-3970E, Lawrence Berkeley National Lab (LBNL), Berkeley, CA United States, 2010. DOI: 10.2172/991751.
   Google Scholar
• Van Dongen, Pauline, Ellen Britton, Anna Wetzel, Rogier Houtman, Ahmed Mohamed Ahmed, and Stephanie Ramos, “Suntex: weaving solar energy into building skin,” J. Facade Des. Eng., vol. 10, no. 2, pp. 141–160, 2022. DOI: 10.47982/jfde.2022.powerskin.9.
   Google Scholar
• H. Toshiyoshi et al., “MEMS vibrational energy harvesters,” Sci. Technol. Adv. Mater., vol. 20, no. 1, pp. 124–143, 2019. DOI: 10.1080/14686996.2019.1569828.
   PubMed Web of Science ®Google Scholar
• D. Gielen et al., “The role of renewable energy in the global energy transformation,” Energy Strategy Rev., vol. 24, pp. 38–50, 2019. DOI: 10.1016/j.esr.2019.01.006.
   Web of Science ®Google Scholar
• M. R. Sarker et al., “Review of piezoelectric energy harvesting system and application of optimization techniques to enhance the performance of the harvesting system,” Sensors Actuators A: Phys., vol. 300, pp. 111634, 2019. DOI: 10.1016/j.sna.2019.111634.
   Web of Science ®Google Scholar
• S. Naik and V. Bagodi, “Energy conservation opportunities: evidences from three industrial clusters in India,” IJESM, vol. 15, no. 3, pp. 600–627, 2021. DOI: 10.1108/IJESM-07-2020-0022.
   Google Scholar
• P. Khude, “A review on energy management in textile industry,” Innov. Ener. Res., vol. 06, no. 02, pp. 169, 2017. DOI: 10.4172/2576-1463.1000169.
   Google Scholar
• E. Ozturk et al., “Improving energy efficiency using the most appropriate techniques in an integrated woolen textile facility,” J. Cleaner Prod., vol. 254, pp. 120145, 2020. DOI: 10.1016/j.jclepro.2020.120145.
   Web of Science ®Google Scholar
• B. Dudem, D. H. Kim, and J. S. Yu, “Triboelectric nanogenerators with gold-thin-film-coated conductive textile as floating electrode for scavenging wind energy,” Nano Res., vol. 11, no. 1, pp. 101–113, 2018. DOI: 10.1016/j.apenergy.2018.09.009.
   Web of Science ®Google Scholar
• S. Z. Jia, “Waste energy harvesting in sustainable manufacturing,” Sustain. Manuf. Process., pp. 231–256, 2023. DOI: 10.1016/B978-0-323-99990-8.00014-X.
   Google Scholar
• Z. Hadas, L. Janak, and J. Smilek, “Virtual prototypes of energy harvesting systems for industrial applications,” Mech. Syst. Signal Process., vol. 110, pp. 152–164, 2018. DOI: 10.1016/j.ymssp.2018.03.036.
   Web of Science ®Google Scholar
• M. J. Burke and J. C. Stephens, “Political power and renewable energy futures: a critical review,” Energy Res. Social Sci., vol. 35, pp. 78–93, 2018. DOI: 10.1016/j.erss.2017.10.018.
   Web of Science ®Google Scholar
• J. R. Albert, K. Ramasamy, V. Joseph Michael Jerard, R. Boddepalli, G. Singaram, and A. Loganathan, “A symmetric solar photovoltaic inverter to improve power quality using digital pulsewidth modulation approach,” Wireless Pers. Commun., vol. 130, no. 3, pp. 2059–2097, 2023. DOI: 10.1007/s11277-023-10372-w.
   Web of Science ®Google Scholar
• S. Hemalatha, A. Johny Renoald, G. Banu, and K. Indirajith, “Design and investigation of PV string/central architecture for bayesian fusion technique using grey wolf optimization and flower pollination optimized algorithm,” Energy Conversion Manage., vol. 286, pp. 117078, 2023. DOI: 10.1016/j.enconman.2023.117078.
   Web of Science ®Google Scholar
• P. K. Pathak, A. K. Yadav, S. Padmanaban, and P. A. Alvi, “Design of robust multi-rating battery charger for charging station of electric vehicles via solar PV system,” Electric Power Components Syst., vol. 50, no. 14–15, pp. 751–761, 2022. DOI: 10.1080/15325008.2022.2139870.
   Web of Science ®Google Scholar
• J. R. Albert et al., “Investigation on load harmonic reduction through solar-power utilization in intermittent SSFI using particle swarm, genetic, and modified firefly optimization algorithms,” IFS, vol. 42, no. 4, pp. 4117–4133, 2022. DOI: 10.3233/JIFS-212559.
   Google Scholar
• A. D. Woldeyohannes, D. E. Woldemichael, and A. T. Baheta, “Sustainable renewable energy resources utilization in rural areas,” Renew. Sustain. Energ. Rev., vol. 66, pp. 1–9, 2016. DOI: 10.1016/j.rser.2016.07.013.
   Google Scholar
• H. Haes Alhelou, M. E. Hamedani Golshan, and M. Hajiakbari Fini, “Wind driven optimization algorithm application to load frequency control in interconnected power systems considering GRC and GDB nonlinearities,” Electric Power Compon. Syst., vol. 46, no. 11–12, pp. 1223–1238, 2018. DOI: 10.1080/15325008.2018.1488895.
   Web of Science ®Google Scholar
• C. Gnanavel, P. Muruganantham, and K. Vanchinathan, “Experimental validation and integration of solar PV fed modular multilevel inverter (MMI) and flywheel storage system,” 2021 IEEE Mysore Sub Section International Conference (MysuruCon), pp. 147–153, IEEE. DOI: 10.1109/MysuruCon52639.2021.9641650.
   Google Scholar
• J. R. Albert and A. A. Stonier, “Design and development of symmetrical super‐lift DC–AC converter using firefly algorithm for solar‐photovoltaic applications,” IET Circuits, Devices & Syst., vol. 14, no. 3, pp. 261–269, 2020. DOI: 10.1049/iet-cds.2018.5292.
   Web of Science ®Google Scholar
• J. R. Albert, A. A. Stonier, and K. Vanchinathan, “Testing and performance evaluation of water pump irrigation system using voltage-lift multilevel inverter,” Int. J. Ambient Energy, vol. 43, no. 1, pp. 8162–8175, 2022. DOI: 10.1080/01430750.2022.2092773.
   Google Scholar
• L. Thangamuthu, J. R. Albert, K. Chinnanan, and B. Gnanavel, “Design and development of extract maximum power from single-double diode PV model for different environmental condition using BAT optimization algorithm,” IFS, vol. 43, no. 1, pp. 1091–1102, 2022. DOI: 10.3233/JIFS-213241.
   Google Scholar
• S. Impram et al., “Challenges of renewable energy penetration on power system flexibility: a survey,” Energy Strategy Rev., vol. 31, pp. 100539, 2020. DOI: 10.1016/j.esr.2020.100539.
   Web of Science ®Google Scholar
• S. Ould Amrouche, Djamila Rekioua, Toufik Rekioua, and Seddik Bacha, “Overview of energy storage in renewable energy systems,” Int. J. Hydro. Energ., vol. 41, no. 45, pp. 20914–20927, 2016. DOI: 10.1016/j.ijhydene.2016.06.243.
   Google Scholar
• P. K. Pathak and A. K. Yadav, “Design of battery charging circuit through intelligent MPPT using SPV system,” Solar Energy, vol. 178, pp. 79–89, 2019. DOI: 10.1016/j.solener.2018.12.018.
   Web of Science ®Google Scholar
• D. Li, S. Zhang, and Y. Xiao, “Interval optimization-based optimal design of distributed energy resource systems under uncertainties,” Energies, vol. 13, no. 13, pp. 3465, 2020. DOI: 10.3390/en13133465.
   Web of Science ®Google Scholar
• R. Haas et al., “The looming revolution: how photovoltaics will change electricity markets in Europe fundamentally,” Energy, vol. 57, pp. 38–43, 2013. DOI: 10.1016/j.energy.2013.04.034.
   Web of Science ®Google Scholar
• A. Hasanbeigi and L. Price, “A review of energy use and energy efficiency technologies for the textile industry,” Renew. Sustain. Energy Rev., vol. 16, no. 6, pp. 3648–3665, 2012. DOI: 10.1016/j.rser.2012.03.029.
   Web of Science ®Google Scholar
• A. Aabid et al., “Systematic review of piezoelectric materials and energy harvesters for industrial applications,” Sensors, vol. 21, no. 12, pp. 4145, 2021. DOI: 10.3390/s21124145.
   PubMed Web of Science ®Google Scholar
• N. A. Abidin, “The simulation analysis of piezoelectric transducer with multi-array configuration,” J. Phy., vol. 1, pp. 012042, 2020. DOI: 10.1088/1742-6596/1432/1/012042.
   Google Scholar
• G. D. Ramady, A. Anung, M. S. Sungkar, Y. A. Nugraha, and A. Wirjawan, “Reduksi Rugi-Rugi Pensaklaran Pada Konverter Dc-Dc Zeta Dengan Teknik Zero Voltage Transition,” Power Elektronik: Jurnal Orang Elektro., vol. 12, no. 1, pp. 49–53, 2023. DOI: 10.30591/polektro.v12i1.4378.
   Google Scholar
• Y. Liang and S. Lin, “Research on bi-directional four-port converter of solar electric vehicle,” Energy Rep., vol. 9, pp. 271–278, 2023. DOI: 10.1016/j.egyr.2022.12.125.
   Google Scholar
• H. Al-Baidhani and M. K. Kazimierczuk, “Simplified nonlinear current-mode control of DC-DC cuk converter for low-cost industrial applications,” Sensors, vol. 23, no. 3, pp. 1462, 2023. DOI: 10.3390/s23031462.
   PubMed Web of Science ®Google Scholar
• P. K. Pathak, A. K. Yadav, S. Padmanaban, P. A. Alvi, and I. Kamwa, “Fuel cell‐based topologies and multi‐input DC–DC power converters for hybrid electric vehicles: a comprehensive review,” IET Generation Trans. Dist., vol. 16, no. 11, pp. 2111–2139, 2022. DOI: 10.1049/gtd2.12439.
   Web of Science ®Google Scholar
• K. Gurumoorthy and S. Balaraman, “Controlling the speed of renewable-sourced DC drives with a series compensated DC to DC converter and sliding mode controller,” Automatika, vol. 64, no. 1, pp. 114–126, 2023. DOI: 10.1080/00051144.2022.2118099.
   Web of Science ®Google Scholar
• P. Nagaveni, M. Siva RamKumar, M. Nivetha, A. Amudha, and G. Emayavaramban, “Electrical energy audit – an experience in a small scale textile mill,” Int. J. Innov. Technol. Explor. Eng., vol. 8, no. 10, pp. 4102–4107, 2019. DOI: 10.1016/j.jclepro.2010.01.006.
   Google Scholar
• R. Velmurugan and K. P. Balraj, “Recent issues and challenges of weaving industry with special reference to select Taminadu districts,” Int. J. Sci. Advance Res. Technol., vol. 4, no. 1, pp. 510–512, 2018.
   Google Scholar
• R. Arulmozhiyaly and K. Baskaran, “Implementation of a fuzzy PI controller for speed control of induction motors using FPGA,” J. Power Electronics, vol. 10, no. 1, pp. 65–71, 2010. DOI: 10.6113/JPE.2010.10.1.065.
   Web of Science ®Google Scholar
• M. Mahmoud et al., “A review of mechanical energy storage systems combined with wind and solar applications,” Energy Conversion Manage., vol. 210, pp. 112670, 2020. DOI: 10.1016/j.enconman.2020.112670.
   Web of Science ®Google Scholar
• Kaniz Farhana, Kumaran Kadirgama, Abu Shadate Faisal Mahamude, and Mushfika Tasnim Mica, "Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability," Mater. Circ. Econ., vol. 4, no. 1, p. 15, 2022.
   Google Scholar
• S. G. Kim, S. Priya, and I. Kanno, “Piezoelectric MEMS for energy harvesting,” MRS Bull, vol. 37, no. 11, pp. 1039–1050, 2012. DOI: 10.1088/1742-6596/660/1/012001.
   Web of Science ®Google Scholar
• G. D. Szarka, B. H. Stark, and S. G. Burrow, “Review of power conditioning for kinetic energy harvesting systems,” IEEE Trans. Power Electron, vol. 27, no. 2, pp. 803–815, 2012. DOI: 10.1109/TPEL.2011.2161675.
   Web of Science ®Google Scholar