45
Views
2
CrossRef citations to date
0
Altmetric
Research Article

Fault Section Recognition within Duration of Power Swing Using Teager–Kaiser Energy Operator and Sequence Components

&
Received 20 Mar 2023, Accepted 08 Oct 2023, Published online: 02 Nov 2023

References

  • Committee PSR, WG D6 power swing and out-of-step consideration on transmission lines. Power System Relaying Committee (PSRC) Report, IEEEPES, Issued on the Published Reports Homepage, pp. 1–59, Jul. 2005.
  • J. Desai and V. Makwana, “Power swing blocking algorithm based on real and reactive power transient stability,” Electr. Power Compon. Syst., vol. 48, no. 16–17, pp. 1–13, 2021. DOI: 10.1080/15325008.2021.1906794.
  • J. Khodaparast, M. Khederzadeh, F. Faria da Silva, and C. L. Bak, “A novel approach to detect faults occurring during power swings by abrupt change of impedance trajectory,” Electr. Power Compon. Syst., vol. 45, no. 15, pp. 1638–1652, 2017. DOI: 10.1080/15325008.2017.1378774.
  • P. K. Nayak, A. K. Pradhan, and P. Bajpai, “A fault detection technique for the series-compensated line during power swing,” IEEE Trans. Power Deliv., vol. 28, no. 2, pp. 714–722, Apr. 2013. DOI: 10.1109/TPWRD.2012.2231886.
  • P. K. Nayak, A. K. Pradhan, and P. Bajpai, “A three-terminal line protection scheme immune to power swing,” IEEE Trans. Power Deliv., vol. 31, no. 3, pp. 999–1006, 2016. DOI: 10.1109/TPWRD.2014.2387873.
  • J. Kumar and P. Jena, “Solution to fault detection during power swing using Teager–Kaiser energy operator,” Arab. J. Sci. Eng., vol. 42, no. 12, pp. 5003–5013, 2017. DOI: 10.1007/s13369-017-2538-7.
  • J. Kumar and P. Jena, “Detection of fault during power swing using superimposed negative sequence apparent power based scheme,” 2017 6th International Conference on Computer Applications in Electrical Engineering-Recent Advances (CERA), Roorkee, 2017, pp. 57–62, DOI: 10.1109/CERA.2017.8343301.
  • B. Patel, “A new technique for detection and classification of faults during power swing,” Electr. Power Syst. Res., vol. 175, no. 1, pp. 105920, 2019. DOI: 10.1016/j.epsr.2019.105920.
  • B. Patel and P. Bera, “Detection of power swing and fault during power swing using Lissajous figure,” IEEE Trans. Power Deliv., vol. 33, no. 6, pp. 3019–3027, Dec. 2018. DOI: 10.1109/TPWRD.2018.2850958.
  • K. Andanapalli and M. Biswal, “An enhanced power swing and symmetrical fault discrimination logic for integrated power network,” Int. Trans. Electr. Energ. Syst., vol. 30, no. 7, pp. e12416, 2020. DOI: 10.1002/2050-7038.12416.
  • H. Shekhar, J. Kumar, and A. Nayak, “A fault detection technique during power swing in a TCSC-compensated line using Teager–Kaiser energy operator,” IETE J. Res., vol. 68, no. 6, pp. 4244–4264, 2022. DOI: 10.1080/03772063.2020.1788427.
  • M. L. S. Kumar, J. Kumar, and R. N. Mahanty, “Fault detection during power swing in a TCSC-compensated transmission line based on Clark’s transform and Teager–Kaiser energy operator,” Iran. J. Sci. Technol. Trans. Electr. Eng., vol. 45, no. 1, pp. 47–60, 2021. DOI: 10.1007/s40998-020-00344-2.
  • B. A. M. Alizadeh, M. Khederzadeh, and R. Razzaghi, “Fault detection during power swing in thyristor-controlled series capacitor-compensated transmission lines,” Electr. Power Syst. Res., vol. 187, pp. 106481, 2020. DOI: 10.1016/j.epsr.2020.106481.
  • S. Vlahinić, D. Franković, B. Juriša, and Z. Zbunjak, “Back up protection scheme for high impedance faults detection in transmission systems based on synchrophasor measurements,” IEEE Trans. Smart Grid, vol. 12, no. 2, pp. 1736–1746, Mar. 2021. DOI: 10.1109/TSG.2020.3031628.
  • K. Chen, J. Hu, and J. He, “Detection and classification of transmission line faults based on unsupervised feature learning and convolutional sparse autoencoder,” IEEE Trans. Smart Grid, vol. 9, no. 3, pp. 1–1, May 2016. DOI: 10.1109/TSG.2016.2598881.
  • M. A. Jarrahi, H. Samet, and T. Ghanbari, “Fast current-only based fault detection method in transmission line,” IEEE Syst. J., vol. 13, no. 2, pp. 1725–1736, Jun. 2019. DOI: 10.1109/JSYST.2018.2822549.
  • R. Godse and S. Bhat, “Mathematical morphology-based feature-extraction technique for detection and classification of faults on power transmission line,” IEEE Access, vol. 8, pp. 38459–38471, 2020. DOI: 10.1109/ACCESS.2020.2975431.
  • S. M. Hashemi and M. Sanaye-Pasand, “Distance protection during asymmetrical power swings: challenges and solutions,” IEEE Trans. Power Deliv., vol. 33, no. 6, pp. 2736–2745, Dec. 2018. DOI: 10.1109/TPWRD.2018.2816304.
  • J. Kumar and P. Jena, “Fault detection during asymmetrical power swing using superimposed negative sequence current,” Arab. J. Sci. Eng., vol. 44, no. 8, pp. 7033–7046, 2019. DOI: 10.1007/s13369-019-03768-z.
  • A. S. Dobakhshari and A. M. Ranjbar, “A wide-area scheme for power system fault location incorporating bad data detection,” IEEE Trans. Power Deliv., vol. 30, no. 2, pp. 800–808, Apr. 2015. DOI: 10.1109/TPWRD.2014.2352336.
  • A. Saber, A. Emam, and H. Elghazaly, “Wide-area backup protection scheme for transmission lines considering cross-country and evolving faults,” IEEE Syst. J., vol. 13, no. 1, pp. 813–822, Mar. 2019. DOI: 10.1109/JSYST.2018.2827938.
  • J. A. De Oliveira Neto, C. A. F. Sartori, and G. M. Junior, “Fault location in overhead transmission lines based on magnetic signatures and on the extended Kalman filter,” IEEE Access, vol. 9, pp. 15259–15270, 2021. DOI: 10.1109/ACCESS.2021.3050211.
  • J. Kumar and P. Jena, “Fault direction estimation during power swing,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, 2016, pp. 1–3. DOI: 10.1109/ICPEICES.2016.7853272.
  • H. Shekhar and J. Kumar, “Fault section identification of a three terminal line during power swing,” Int. Trans. Electr. Energ. Syst., vol. 31, no. 4, pp. e12849, 2021. DOI: 10.1002/2050-7038.12849.
  • P. Maragos, J. F. Kaiser, and T. F. Quatieri, “On amplitude and frequency demodulation using energy operators,” IEEE Trans. Signal Process., vol. 41, no. 4, pp. 1532–1550, Apr. 1993. DOI: 10.1109/78.212729.
  • I. Kamwa, A. K. Pradhan, and G. Joós, “Robust detection and analysis of power system oscillations using the Teager–Kaiser energy operator,” IEEE Trans. Power Syst., vol. 26, no. 1, pp. 323–333, Feb. 2011. DOI: 10.1109/TPWRS.2010.2046503.
  • H. Xiao, J. Wei, H. Liu, Q. Li, Y. Shi, and T. Zhang, “Identification method for power system low-frequency oscillations based on improved VMD and Teager–Kaiser energy operator,” IET Gener. Transm. Distrib., vol. 11, no. 16, pp. 4096–4103, Aug. 2017. DOI: 10.1049/iet-gtd.2017.0577.
  • H. Shekhar and J. Kumar, “Recognition of fault section during power swing in the presence of TCSC environment,” Arab. J. Sci. Eng., vol. 47, no. 11, pp. 14229–14247, 2022. DOI: 10.1007/s13369-022-06700-0.
  • K. Andanapalli and B. R. K. Varma, “Park’s transformation based symmetrical fault detection during power swing,” Eighteenth National Power Systems Conference (NPSC), Guwahati, 2014, pp. 1–5.
  • P. Jena and A. K. Pradhan, “Directional relaying during power swing and single-pole tripping,” International Conference on Power Systems, 2009, pp. 1–6. DOI: 10.1109/ICPWS.2009.5442711.
  • P. Jena and A. K. Pradhan, “Directional relaying in the presence of a thyristor-controlled series capacitor,” IEEE Trans. Power Deliv., vol. 28, no. 2, pp. 628–636, 2013. DOI: 10.1109/TPWRD.2013.2249538.
  • J. Kumar and P. Jena, “Directional relaying in presence of STATCOM during single pole tripping,” IET Sci. Meas. Technol., vol. 11, no. 5, pp. 673–680, 2017. DOI: 10.1049/iet-smt.2016.0305.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.