An Intelligent Optimized Control System for Induction Heating Application

References

• Y. Zhang, Y. Hong, and K. Choi, “Optimal energy-dissipation control for SOC based balancing in series connected Lithium-ion battery packs,” Multimed. Tools Appl., vol. 79, no. 23–24, pp. 15923–15944, 2020. DOI: 10.1007/s11042-018-6655-4.
   Web of Science ®Google Scholar
• T. N. Rincy and R. Gupta, “An efficient feature subset selection approach for machine learning,” Multimed. Tools Appl., vol. 80, no. 8, pp. 12737–12830, 2021. DOI: 10.1007/s11042-020-10011-7.
   Web of Science ®Google Scholar
• A. Mahabadi and M. R. Besmi, “Risk-aware service level agreement modeling in smart grid,” Multimed. Tools Appl., vol. 80, no. 1, pp. 1433–1456, 2021. DOI: 10.1007/s11042-020-09787-5.
   Web of Science ®Google Scholar
• M. A. Elgenedy, A. M. Massoud, S. Ahmed, B. W. Williams, and J. R. McDonald, “A modular multilevel voltage-boosting Marx pulse-waveform generator for electroporation applications,” IEEE Trans. Power Electron., vol. 34, no. 11, pp. 10575–10589, 2019. DOI: 10.1109/TPEL.2019.2899974.
   Web of Science ®Google Scholar
• S. Mohsenzade, “A high-voltage series-stacked IGBT switch with output pulse shaping capability to reduce EMI generation,” IEEE Trans. Electromagn. Compat., vol. 64, no. 2, pp. 559–568, 2022. DOI: 10.1109/TEMC.2021.3126026.
   Web of Science ®Google Scholar
• D. Ronanki and S. S. Williamson, “A novel 2N + 1 carrier-based pulse width modulation scheme for modular multilevel converters with reduced control complexity,” IEEE Trans. Ind. Appl., vol. 56, no. 5, pp. 5593–5602, 2020. DOI: 10.1109/TIA.2020.3009078.
   Web of Science ®Google Scholar
• A. Nikbahar and M. Monfared, “Smooth DC-Link Y-source Inverters: suppression of shoot-through current and avoiding DC magnetism,” IEEE Trans. Power Electron., vol. 37, no. 10, pp. 12357–12369, 2022. DOI: 10.1109/TPEL.2022.3178202.
   Web of Science ®Google Scholar
• S. Morini, D. Respigo, and M. Arosio, “Challenges in driving new generations of power switches for motor drive: a dV/dt self-adjusting architecture for superjunction power devices,” in Next-Generation ADCs, High-Performance Power Management, and Technology Considerations for Advanced Integrated Circuits: Advances Analog Circuit Design 2019, Cham, Switzerland: Springer, 2020, pp. 193–211. DOI: 10.1007/978-3-030-25267-0_12.
   Google Scholar
• M. Biason, S. Calligaro, M. Iurich, R. Petrella, and A. Shahdadi, “Advances on analysis, modeling and accurate self-commissioning compensation of inverter dead-time distortion based on a physical model,” 2021 IEEE Energy Conversion Congress and Exposition (ECCE), Vancouver, Canada, IEEE, 2021. DOI: 10.1109/ECCE47101.2021.9594922.
   Google Scholar
• X. Du, J. Zhang, G. Li, Y. Yu, C. Qian, and R. Du, “Thermal fatigue failure mechanism of IGBT module,” in Thermal Reliability of Power Semiconductor Device in the Renewable Energy System. Singapore: Springer, 2022, pp. 17–33. DOI: 10.1007/978-981-19-3132-1_2.
   Google Scholar
• Q. Yu, E. Lemmen, C. G. E. Wijnands, and B. Vermulst, “Output spectrum modeling of an H-bridge inverter with dead-time based on switching mode analysis,” IEEE Trans. Power Electron., vol. 36, no. 10, pp. 11344–11356, 2021. DOI: 10.1109/TPEL.2021.3067638.
   Web of Science ®Google Scholar
• J. W. Park, H. X. Nguyen, T. N. C. Tran, and J. W. Jeon, “A linear compensation method for improving the accuracy of an absolute multipolar magnetic encoder,” IEEE Access., vol. 9, pp. 19127–19138, 2021. DOI: 10.1109/ACCESS.2021.3054362.
   Web of Science ®Google Scholar
• S. A. Q. Mohammed and J. W. Jung, “A state-of-the-art review on soft-switching techniques for DC–DC, DC–AC, AC–DC, and AC–AC power converters,” IEEE Trans. Ind. Inf., vol. 17, no. 10, pp. 6569–6582, 2021. DOI: 10.1109/TII.2021.3058218.
   Web of Science ®Google Scholar
• A. Latif, S. M. S. Hussain, D. C. Das, and T. S. Ustun, “State-of-the-art of controllers and soft computing techniques for regulated load frequency management of single/multi-area traditional and renewable energy based power systems,” Appl. Energy, vol. 266, pp. 114858, 2020. DOI: 10.1016/j.apenergy.2020.114858.
   Web of Science ®Google Scholar
• A. Rodríguez-Molina, E. Mezura-Montes, M. G. Villarreal-Cervantes, and M. Aldape-Pérez, “Multi-objective meta-heuristic optimization in intelligent control: a survey on the controller tuning problem,” Appl. Soft Comput., vol. 93, pp. 106342, 2020. DOI: 10.1016/j.asoc.2020.106342.
   Web of Science ®Google Scholar
• E. Bikdeli, M. R. Islam, M. M. Rahman, and K. M. Muttaqi, “State of the art of the techniques for grid forming inverters to solve the challenges of renewable rich power grids,” Energies, vol. 15, no. 5, pp. 1879, 2022. DOI: 10.3390/en15051879.
   Web of Science ®Google Scholar
• D. Sain, M. Praharaj, and M. M. Bosukonda, “A simple modelling strategy for integer order and fractional order interval type-2 fuzzy PID controllers with their simulation and real-time implementation,” Expert Syst App., vol. 202, pp. 117196, 2022. DOI: 10.1016/j.eswa.2022.117196.
   Web of Science ®Google Scholar
• S. A. C. Giraldo et al., “Model predictive control with dead-time compensation applied to a gas compression system,” J. Pet. Sci. Eng., vol. 203, pp. 108580, 2021. DOI: 10.1016/j.petrol.2021.108580.
   Web of Science ®Google Scholar
• W. Wan, T. Yu, and S. Duan, “Dead-time compensation in active NPC three-level inverters considering current ripple,” 2014 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), 2021. DOI: 10.1109/TTE.2022;3164891.
   Google Scholar
• T. George and V. Ganesan, “Optimal tuning of FOPID controller for higher order process using hybrid approach,” Appl. Intell., vol. 52, no. 13, pp. 15345–15367, 2022. DOI: 10.1007/s10489-022-03167-2.
   Web of Science ®Google Scholar
• M. Karimi, M. Ali, A. Hassan, M. Sawan, and B. Gosselin, “An active dead-time control circuit with timing elements for a 45-V input 1-MHz half-bridge converter,” IEEE Trans. Circuits Syst. I, vol. 69, no. 1, pp. 30–41, 2022. DOI: 10.1109/TCSI.2021.3096522.
   Google Scholar
• D. N. Sankhe, R. R. Sawant, and Y. S. Rao, “FPGA-based hybrid control strategy for resonant inverter in induction heating applications,” IEEE J. Emerg. Sel. Top. Ind. Electron., vol. 3, no. 1, pp. 156–165, 2022. DOI: 10.1109/JESTIE.2021.3051584.
   Google Scholar
• D. Pathak and P. Gaur, “A novel fractional‐order nonlinear PID‐based pitch angle control strategy for a PMSG‐based wind energy system,” Int. Trans. Electr. Energy Syst., vol. 30, no. 12, pp. e12671, 2020. DOI: 10.1002/2050-7038.12671.
   Web of Science ®Google Scholar
• S. P. Bihari et al., “A comprehensive review of microgrid control mechanism and impact assessment for hybrid renewable energy integration,” IEEE Access., vol. 9, pp. 88942–88958, 2021. DOI: 10.1109/ACCESS.2021.3090266.
   Web of Science ®Google Scholar
• S. P. Bihari and P. K. Sadhu, “SLDB controller based 31 level MLI for grid-connected hybrid renewable energy sources,” J. Ambient Intell. Humaniz. Comput., vol. 10, pp. 77–87, 2021. DOI: 10.1007/s12652-021-03357-9.
   Google Scholar
• S. Bihari, U. Goswami, A. Goswami, and P. K. Sadhu, “Fast estimating method of effective life of power cable in industrial environment,” 2019 23rd International Conference Electronics, IEEE, 2019. DOI: 10.1109/ELECTRONICS.2019.8765696.
   Google Scholar
• S. P. Bihari and P. K. Sadhu, “Techno-economic analysis for fertilizer house using hybrid power stations,” Soft Comput., vol. 26, no. 18, pp. 9515–9525, 2022. DOI: 10.1007/s00500-022-06731-7.
   Web of Science ®Google Scholar
• H. Tebianian, Y. Salami, B. Jeyasurya, and J. E. Quaicoe, “A 13.56-MHz full-bridge class-D ZVS inverter with dynamic dead-time control for wireless power transfer systems,” IEEE Trans. Ind. Electron., vol. 67, no. 2, pp. 1487–1497, 2020. DOI: 10.1109/TIE.2018.2890505.
   Web of Science ®Google Scholar
• S. Pashaei and P. Bagheri, “Parallel cascade control of dead time processes via fractional order controllers based on Smith predictor,” ISA Trans., vol. 98, pp. 186–197, 2020. DOI: 10.1016/j.isatra.2019.08.047.
   PubMed Web of Science ®Google Scholar
• P. A. M. Devan, F. A. B. Hussin, R. Ibrahim, K. Bingi, and H. Q. A. Abdulrab, “Fractional-order predictive pi controller for dead-time processes with set-point and noise filtering,” IEEE Access., vol. 8, pp. 183759–183773, 2020. DOI: 10.1109/ACCESS.2020.3029068.
   Web of Science ®Google Scholar
• V. B. Devara, V. Neti, T. Maity, and P. Shunmugam, “Capacitor‐sharing two‐output series‐resonant inverter for induction cooking application,” IET Power Electron., vol. 9, no. 11, pp. 2240–2248, 2016. DOI: 10.1049/iet-pel.2016.0114.
   Web of Science ®Google Scholar
• Ch. Kasi Ramakrishnareddy, S. Porpandiselvi, and N. Vishwanathan, “A three‐leg resonant converter for two output LED lighting application with independent control,” Circuit Theory Apps., vol. 47, no. 7, pp. 1173–1187, 2019. DOI: 10.1002/cta.2632.
   Web of Science ®Google Scholar
• P. Vishnuram and G. Ramachandiran, “A simple multi‐frequency multiload independent power control using pulse density modulation scheme for cooking applications,” Int. Trans. Electr. Energy. Syst., vol. 31, no. 3, pp. e12771, 2021. DOI: 10.1002/2050-7038.12771.
   Web of Science ®Google Scholar
• P. Vishnuram, G. Ramachandiran, T. Sudhakar Babu, and B. Nastasi, “Induction heating in domestic cooking and industrial melting applications: a systematic review on modelling, converter topologies and control schemes,” Energies, vol. 14, no. 20, pp. 6634, 2021. DOI: 10.3390/en14206634.
   Web of Science ®Google Scholar
• P. Vishnuram, G. Ramachandiran, and S. Ramasamy, “A novel power control technique for series resonant inverter-fed induction heating system with fuzzy-aided digital pulse density modulation scheme,” Int. J. Fuzzy Syst., vol. 20, no. 4, pp. 1115–1129, 2018. DOI: 10.1007/s40815-017-0408-9.
   Web of Science ®Google Scholar
• S. P. Bihari and P. K. Sadhu, “A novel function roach and intelligence control technique for power quality improvement in grid incorporated solar photovoltaic system,” Int. J. Green Energy., vol. 19, no. 11, pp. 1170–1190, 2020. DOI: 10.1080/15435075.2021.1986403.
   Web of Science ®Google Scholar
• S. F. Ahmed, G. Liu, M. Mofijur, A. K. Azad, M. A. Hazrat, and Y. M. Chu, “Physical and hybrid modelling techniques for earth-air heat exchangers in reducing building energy consumption: performance, applications, progress, and challenges,” Sol. Energy, vol. 216, pp. 274–294, 2021. DOI: 10.1016/j.solener.2021.01.022.
   Web of Science ®Google Scholar
• M. Dhaini and N. Mansour, “Squirrel search algorithm for portfolio optimization,” Expert Syst. Appl., vol. 178, pp. 114968, 2021. DOI: 10.1016/j.eswa.2021.114968.
   Web of Science ®Google Scholar
• S. Panchal, R. D. Kulkarni, M. K. Raja, and J. Nataraj, “Design, simulation and hardware implementation of soft switching based induction heating system,” 2021 6th International Conference for Convergence in Technology (I2CT), IEEE, 2021. DOI: 10.1109/I2CT51068.2021.9418170.
   Google Scholar
• S. Kassan, J. Gaber, and P. Lorenz, “Autonomous energy management system achieving piezoelectric energy harvesting in wireless sensors,” Mobile Netw. Appl., vol. 25, no. 2, pp. 794–805, 2020. DOI: 10.1007/s11036-019-01303-w.
   Web of Science ®Google Scholar
• B. Morteza, F. Qaderi, and A. H. Sayyahzadeh, “Development of a novel induction-heated reactor to enhance the performance of waste tires pyrolysis,” Waste Manage., vol. 162, pp. 27–35, 2023. DOI: 10.1016/j.wasman.2023.03.006.
   PubMed Web of Science ®Google Scholar
• C. Feng et al., “Optimizing fundamental design of soft magnetic layer to improve the energy conversion efficiency of airport pavement induction heating,” Constr. Build. Mater., vol. 392, pp. 132059, 2023. DOI: 10.1016/j.conbuildmat.2023.132059.
   Web of Science ®Google Scholar
• Q. Mohammed et al., “Early outlier detection in three-phase induction heating systems using clustering algorithms,” Ain Shams Eng. J., vol. 15, no. 3, pp. 102467, 2024.
   Web of Science ®Google Scholar