Relegated Thrust Ripples for Linear Induction Motors Based-Four Voltage Vectors Finite-Set Predictive Control and Model Reference Adaptive System

References

• M. F. Elmorshedy, W. Xu, S. M. Allam, J. Rodriguez and C. Garcia, “MTPA-based finite-set model predictive control without weighting factors for linear induction machine,” IEEE Trans. Ind. Electron., vol. 68, no. 3, pp. 2034–2047, 2021. DOI: 10.1109/TIE.2020.2972432.
   Web of Science ®Google Scholar
• H. T. Cho, Y. C. Liu and K. A. Kim, “Short-primary linear induction motor modeling with end effects for electric transportation systems,” in Proc. - 2018 Int. Symp. Comput. Consum. Control. IS3C 2018, 2019, pp. 338–341. DOI: 10.1109/IS3C.2018.00092.
   Google Scholar
• M. F. Elmorshedy, W. Xu, Y. Liu, S. M. Allam and M. Dong, “Speed control of linear induction motor based on finite-set model predictive direct flux control,” in Proceedings - PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics, 2019. DOI: 10.1109/PRECEDE.2019.8753329.
   Google Scholar
• B. Susluoglu and V. M. Karsli, “Direct thrust controlled linear induction motor including end effect,” in 2008 13th Int. Power Electron. Motion Control Conf. EPE-PEMC 2008, 2008, pp. 850–854. DOI: 10.1109/EPEPEMC.2008.4635373.
   Google Scholar
• W. Xu, M. F. Elmorshedy, Y. Liu, M. R. Islam and S. M. Allam, “Finite-set model predictive control based thrust maximization of linear induction motors used in linear metros,” IEEE Trans. Veh. Technol., vol. 68, no. 6, pp. 5443–5458, 2019. DOI: 10.1109/TVT.2019.2909785.
   Web of Science ®Google Scholar
• W. Xu, M. M. Ali, M. F. Elmorshedy, S. M. Allam and C. Mu, “One improved sliding mode DTC for linear induction machines based on linear metro,” IEEE Trans. Power Electron., vol. 36, no. 4, pp. 4560–4571, 2021. DOI: 10.1109/TPEL.2020.3025184.
   Web of Science ®Google Scholar
• M. F. Elmorshedy, W. Xu and Y. Liu, “Speed control of linear induction motor with thrust and stator flux ripple reduction,” in Proc. 2018 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, Korea (South), 2018, pp. 1789–1794. DOI: 10.23919/ICEMS.2018.8549148.
   Google Scholar
• J. Han, Y. Du, Y. Li and N. Jin, “Analysis of longitudinal end effect of singled-side linear induction motor,” in Proc. 2008 IEEE Int. Conf. Inf. Autom. ICIA 2008, no. 50577062, 2008, pp. 357–362. DOI: 10.1109/ICINFA.2008.4608025.
   Google Scholar
• A. Accetta, M. Cirrincione, M. Pucci and A. Sferlazza, “State space-vector model of linear induction motors including end-effects and iron losses part I: theoretical analysis,” IEEE Trans. Ind. Appl., vol. 56, no. 1, pp. 235–244, 2020. DOI: 10.1109/TIA.2019.2952031.
   Web of Science ®Google Scholar
• M. F. Elmorshedy, W. Xu, Y. Liu, S. M. Allam, M. M. Ali and M. Dong, “Sensorless direct thrust control of a linear induction motor based on MRAS,” in 2019 12th International Symposium on Linear Drives for Industry Applications, LDIA 2019, 2019. DOI: 10.1109/LDIA.2019.8770984.
   Google Scholar
• J. Rodriguez, et al., “Latest advances of model predictive control in electrical drives—Part II: applications and benchmarking with classical control methods,” IEEE Trans. Power Electron., vol. 37, no. 5, pp. 5047–5061, May 2022. DOI: 10.1109/TPEL.2021.3121589.
   Web of Science ®Google Scholar
• G. E. Dawson, A. R. Eastham, J. F. Gieras, R. Ong and K. Ananthasivam, “Design of linear induction drives by field analysis and finite-element techniques,” IEEE Trans. Ind. Appl., vol. IA-22, no. 5, pp. 865–873, Sept. 1986. DOI: 10.1109/TIA.1986.4504805.
   Web of Science ®Google Scholar
• Y. Jiang, W. Xu and C. Ye, “Composite field-oriented control for linear induction motor based super-twisting sliding mode observers,” IEEE CEFC 2016 - 17th Bienn. Conf. Electromagn. F. Comput, 2017. vol. 20, no. 1, pp. 2015. DOI: 10.1109/CEFC.2016.7816279.
   Google Scholar
• M. Cirrincione, A. Accetta, M. Pucci and G. Vitale, “MRAS speed observer for high-performance linear induction motor drives based on linear neural networks,” IEEE Trans. Power Electron., vol. 28, no. 1, pp. 123–134, 2013. DOI: 10.1109/TPEL.2012.2200506.
   Web of Science ®Google Scholar
• M. A. Usta, O. Akyazi and A. S. Akpinar, “Simulation of direct thrust control for linear induction motor including end-effect,” in INISTA 2012 - Int. Symp. Innov. Intell. Syst. Appl., no. 2, 2012. DOI: 10.1109/INISTA.2012.6246998.
   Google Scholar
• M. A. M. Cheema, J. E. Fletcher, D. Xiao and M. F. Rahman, “A direct thrust control scheme for linear permanent magnet synchronous motor based on online duty ratio control,” IEEE Trans. Power Electron., vol. 31, no. 6, pp. 4416–4428, 2016. DOI: 10.1109/TPEL.2015.2475400.
   Web of Science ®Google Scholar
• E. Liu, Y. Han, A. S. Zalhaf, P. Yang and C. Wang, “Performance evaluation of isolated three-phase voltage source inverter with LC filter adopting different MPC methods under various types of load,” Control Eng. Pract., vol. 135, pp. 105520, 2023. DOI: 10.1016/j.conengprac.2023.105520.
   Web of Science ®Google Scholar
• M. F. Elmorshedy and W. Xu, “Finite-set model predictive current-control in field weakening region for linear induction machines,” in 2021 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2021, pp. 132–137. DOI: 10.1109/PRECEDE51386.2021.9680948.
   Google Scholar
• M. Elsisi, K. Mahmoud, M. Lehtonen and M. M. F. Darwish, “Effective nonlinear model predictive control scheme tuned by improved NN for robotic manipulators,” IEEE Access, vol. 9, pp. 64278–64290, 2021. DOI: 10.1109/ACCESS.2021.3075581.
   Web of Science ®Google Scholar
• Y. Zhang, B. Xia, H. Yang and J. Rodriguez, “Overview of model predictive control for induction motor drives,” Chinese J. Electr. Eng., vol. 2, no. 1, pp. 62–76, 2016. DOI: 10.23919/CJEE.2016.7933116.
   Google Scholar
• A. Ammar, B. Talbi, T. Ameid, Y. Azzoug and A. Kerrache, “Predictive direct torque control with reduced ripples for induction motor drive based on T-S fuzzy speed controller,” Asian J. Control, vol. 21, no. 4, pp. 2155–2166, 2019. DOI: 10.1002/asjc.2148.
   Web of Science ®Google Scholar
• M. F. Elmorshedy, W. Xu, F. F. M. El-Sousy, M. R. Islam and A. A. Ahmed, “Recent achievements in model predictive control techniques for industrial motor: a comprehensive state-of-the-art,” IEEE Access, vol. 9, pp. 58170–58191, 2021. DOI: 10.1109/ACCESS.2021.3073020.
   Web of Science ®Google Scholar
• M. Norambuena, et al., “A very simple strategy for high-quality performance of ac machines using model predictive control,” IEEE Trans. Power Electron., vol. 34, no. 1, pp. 794–800, 2019. DOI: 10.1109/TPEL.2018.2812833.
   Web of Science ®Google Scholar
• W. Xu, M. F. Elmorshedy, Y. Liu, J. Rodriguez and C. Garcia, “Maximum thrust per ampere of linear induction machine based on finite-set model predictive direct thrust control,” IEEE Trans. Power Electron., vol. 35, no. 7, pp. 7366–7378, 2020. DOI: 10.1109/TPEL.2019.2960280.
   Web of Science ®Google Scholar
• M. Preindl and S. Bolognani, “Model predictive direct torque control with finite control set for pmsm drive systems, part 1: maximum torque per ampere operation,” IEEE Trans. Ind. Inf., vol. 9, no. 4, pp. 1912–1921, Nov. 2013. DOI: 10.1109/TII.2012.2227265.
   Web of Science ®Google Scholar
• M. Habibullah, D. D.-C. Lu, D. Xiao and M. F. Rahman, “A simplified finite-state predictive direct torque control for induction motor drive,” IEEE Trans. Ind. Electron., vol. 63, no. 6, pp. 3964–3975, Jun. 2016. DOI: 10.1109/TIE.2016.2519327.
   Web of Science ®Google Scholar
• S. A. Davari, “Predictive direct angle control of induction motor,” IEEE Trans. Ind. Electron., vol. 63, no. 8, pp. 1–1, Aug. 2016. DOI: 10.1109/TIE.2016.2551198.
   Web of Science ®Google Scholar
• W. Xu, J. Zou, Y. Liu and J. Zhu, “Weighting factor less model predictive thrust control for linear induction machine,” IEEE Trans. Power Electron, vol. 34, no. 10, pp. 9916–9928, Oct. 2019. DOI: 10.1109/TPEL.2019.2893373.
   Web of Science ®Google Scholar
• R. Vargas, U. Ammann, B. Hudoffsky, J. Rodriguez and P. Wheeler, “Predictive torque control of an induction machine fed by a matrix converter with reactive input power control,” IEEE Trans. Power Electron, vol. 25, no. 6, pp. 1426–1438, Jun. 2010. DOI: 10.1109/TPEL.2010.2040839.
   Web of Science ®Google Scholar
• M. R. Nikzad, B. Asaei and S. O. Ahmadi, “Discrete duty-cycle-control method for direct torque control of induction motor drives with model predictive solution,” IEEE Trans. Power Electron, vol. 33, no. 3, pp. 2317–2329, 2018. DOI: 10.1109/TPEL.2017.2690304.
   Web of Science ®Google Scholar
• J. Duncan, “Linear induction motor-equivalent-circuit model,” IEE Proc. B Electr. Power Appl. UK, vol. 130, no. 1, pp. 51–57, 1983. DOI: 10.1049/ip-b.1983.0008.
   Google Scholar
• M. F. Elmorshedy, W. Xu, Y. Liu and M. Dong, “A sensorless finite-set model predictive direct thrust control of a linear induction motor based on MRAS for linear metro,” in 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019, 2019. DOI: 10.1109/IEMDC.2019.8785410.
   Google Scholar
• A. S. Zalhaf, M. Abdel-Salam and M. Ahmed, “An active common-mode voltage canceler for pwm converters in wind-turbine doubly-fed induction generators,” Energies, vol. 12, no. 4, pp. 691, 2019. DOI: 10.3390/en12040691.
   Web of Science ®Google Scholar
• M. Cirrincione and M. Pucci, “An MRAS-based sensorless high-performance induction motor drive with a predictive adaptive model,” IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 532–551, 2005. DOI: 10.1109/TIE.2005.844247.
   Web of Science ®Google Scholar