111
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Investigation of Partial Discharge Phenomena on XLPE Cable Insulation Using COMSOL Multiphysics

&
Received 06 Nov 2023, Accepted 31 Mar 2024, Published online: 13 Apr 2024

References

  • R. Sahoo and S. Karmakar, “Impact of Accelerated Thermal Aging on Electrical Tree Structure and Physicochemical Characteristics of XLPE Insulation,” IEEE Trans. Dielect. Electr. Insul., vol. 31, no. 1, pp. 429–438, 2024. DOI: 10.1109/TDEI.2023.3310946.
  • R. Sahoo and S. Karmakar, “Investigation of electrical tree growth characteristics and partial discharge pattern analysis using deep neural network,” Electr. Power Syst. Res., vol. 220, pp. 109287, 2023. DOI: 10.1016/j.epsr.2023.109287.
  • C. Pan, G. Chen, J. Tang and K. Wu, “Numerical modeling of partial discharges in a solid dielectric-bounded cavity: a review,” IEEE Trans. Dielect. Electr. Insul, vol. 26, no. 3, pp. 981–1000, 2019. DOI: 10.1109/TDEI.2019.8726048.
  • J. M. Rodríguez‐Serna, R. Albarracín‐Sánchez, and A. A. Mas’ Ud, “Finite‐element‐analysis models for numerical simulation of partial discharges in spherical cavities within solid dielectrics: a review and a novel method,” High Voltage, vol. 5, no. 5, pp. 556–568, 2020. DOI: 10.1049/hve.2019.0392.
  • L. Niemeyer, “A generalized approach to partial discharge modeling,” IEEE Trans. Dielect. Electr. Insul., vol. 2, no. 4, pp. 510–528, 1995. DOI: 10.1109/94.407017.
  • A. L. Kupershtokh, et al., “Stochastic models of partial discharge activity in solid and liquid dielectrics,” IET Sci. Meas. Technol., vol. 1, no. 6, pp. 303–311, 2007. DOI: 10.1049/iet-smt:20060104.
  • A. Patil, D. Patil, R. Pangarkar and D. Patil, “Modelling and FEA analysis of partial discharge phenomena in a spherical void within solid dielectric material,” In 2018 IEEE International Conference on Current Trends towards Converging Technologies (ICCTCT), pp. 1–4.
  • G. Callender, I. O. Golosnoy, P. Rapisarda and P. L. Lewin, “Critical analysis of partial discharge dynamics in air filled spherical voids,” J. Phys. D: Appl. Phys., vol. 51, no. 12, pp. 125601, 2018. DOI: 10.1088/1361-6463/aaae7c.
  • U. Musa, et al., “FEA-based simulation of accelerated ageing in a power cable due to sustained partial discharge activities in a spherical cavity,” Arab J Sci Eng, vol. 48, no. 11, pp. 15029–15043, 2023. DOI: 10.1007/s13369-023-07967-7.
  • J. Joseph, S. Mohan and S. Thiruthi Krishnan, “Numerical modelling, simulation and experimental validation of partial discharge in cross‐linked polyethylene cables,” IET Science, Measurement & Technol., vol. 13, no. 2, pp. 309–317, 2019. DOI: 10.1049/iet-smt.2018.5248.
  • H. Illias, G. Chen, and P. L. Lewin, “Modeling of partial discharge activity in spherical cavities within a dielectric material,” IEEE Electr. Insul. Mag., vol. 27, no. 1, pp. 38–45, 2011. DOI: 10.1109/MEI.2011.5699446.
  • O. E. Gouda, A. A. ElFarskoury, A. R. Elsinnary and A. A. Farag, “Investigating the effect of cavity size within medium‐voltage power cable on partial discharge behaviour,” IET Generation, Transmission & Distribution, vol. 12, no. 5, pp. 1190–1197, 2018. DOI: 10.1049/iet-gtd.2017.1012.
  • H. A. Illias, M. A. Tunio, A. H. A. Bakar, H. Mokhlis and G. Chen, “Partial discharge phenomena within an artificial void in cable insulation geometry: experimental validation and simulation,” IEEE Trans. Dielect. Electr. Insul, vol. 23, no. 1, pp. 451–459, 2016. DOI: 10.1109/TDEI.2015.005155.
  • H. A. Illias, G. Chen and P. L. Lewin, “Measurement of partial discharge activities within two artificial spherical voids in an epoxy resin,” In 2011 IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, pp. 489–492.
  • J. M. Rodríguez-Serna, R. Albarracín-Sánchez, M. Dong, and M. Ren, “Computer simulation of partial discharges in voids inside epoxy resins using three-capacitance and analytical models,” Polymers (Basel), vol. 12, no. 1, pp. 77, 2020. DOI: 10.3390/polym12010077.
  • S. Morsalin, B. T. Phung and A. Cavallini, “Measurement and modeling of partial discharge arising from different cavity geometries at very low frequency,” IEEE Trans. Dielect. Electr. Insul, vol. 27, no. 4, pp. 1110–1118, 2020. DOI: 10.1109/TDEI.2020.008668.
  • H. Illias, G. Chen and P. L. Lewin, “Partial discharge behavior within a spherical cavity in a solid dielectric material as a function of frequency and amplitude of the applied voltage,” IEEE Trans. Dielect. Electr. Insul, vol. 18, no. 2, pp. 432–443, 2011. DOI: 10.1109/TDEI.2011.5739447.
  • M. Borghei, and M. Ghassemi, “Partial discharge analysis under high-frequency, fast-rise square wave voltages in silicone gel: a modeling approach,” Energies, vol. 12, no. 23, pp. 4543, 2019. DOI: 10.3390/en12234543.
  • K. Wu, T. Okamoto and Y. Suzuoki, “Effects of discharge area and surface conductivity on partial discharge behavior in voids under square voltages,” IEEE Trans. Dielect. Electr. Insul, vol. 14, no. 2, pp. 461–470, 2007. DOI: 10.1109/TDEI.2007.344627.
  • C. Pan, et al., “Investigation of cavity PD physical processes at DC voltage by simulation,” IEEJ Trans. Elec Engng, vol. 13, no. 10, pp. 1376–1383, 2018. DOI: 10.1002/tee.22704.
  • A. Sahu, R. Sahoo and S. Karmakar, “The study of electric field and partial discharges on XLPE Insulation under DC high voltage using COMSOL multiphysics,” In 2021 IEEE 3rd International Conference on High Voltage Engineering and Power Systems (ICHVEPS), pp. 309–313.
  • M. Florkowski, “Influence of harmonics on partial discharge measurements and interpretation of phase-resolved patterns,” Measurement, vol. 196, pp. 111198, 2022. DOI: 10.1016/j.measurement.2022.111198.
  • G. D. O. Machado, L. C. Gomes, A. W. F. V. da Silveira, C. E. Tavares and D. A. de Andrade, “Impacts of harmonic voltage distortions on the dynamic behavior and the PRPD patterns of partial discharges in an air cavity inside a solid dielectric material,” Energies, vol. 15, no. 7, pp. 2650, 2022. DOI: 10.3390/en15072650.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.