References
- R. CLEMMER, “The Development of Tritium Breeding Blankets for DT-Burning Fusion Reactors,” 4th ANS Topical Mtg. on the Technology of Controlled Nuclear Fusion, 1980.
- M. ABDOU et al., “Blanket/First Wall Challenges and Required R&D on the Pathway to DEMO,” Fusion Eng. Des., 100, 2 (2015); https://doi.org/10.1016/j.fusengdes.2015.07.021.
- G. PIAZZA et al., “Measurements of Effective Thermal Conductivity of Ceramic Breeder Pebble Beds,” Fusion Eng. Des., 58, 661 (2001); https://doi.org/10.1016/S0920-3796(01)00521-X.
- M. DALLE DONNE et al., “Measurements of the Effective Thermal Conductivity of a Li4SiO4 Pebble Bed,” Fusion Eng. Des., 49, 513 (2000); https://doi.org/10.1016/S0920-3796(00)00261-1.
- T. HATANO et al., “Effective Thermal Conductivity of a Li2TiO3 Pebble Bed for a DEMO Blanket,” Fusion Sci. Technol., 44, 1, 94 (2003); https://doi.org/10.13182/FST03-A316.
- H. TANIGAWA et al., “Effective Thermal Conductivity of a Compressed Li2TiO3 Pebble Bed,” Fusion Eng. Des., 75, 801 (2005); https://doi.org/10.1016/j.fusengdes.2005.06.104.
- H. TANIGAWA et al., “Thermal Conductivity Measurement with Silica-Coated Hot Wire for Li4SiO4 Pebble Bed,” J. Nucl. Sci. Technol., 46, 6, 553 (2009); https://doi.org/10.1080/18811248.2007.9711561.
- Y. LI et al., “Design and Research on the Measurement Platform of the Effective Thermal Conductivity for Li4SiO4 and Li2SiO3 Pebble Bed,” Fusion Eng. Des., 98, 1911 (2015); https://doi.org/10.1016/j.fusengdes.2015.02.061.
- Y. H. PARK et al., “Fabrication of Li2TiO3 Pebbles Using PVA–Boric Acid Reaction for Solid Breeding Materials,” J. Nucl. Mater., 455, 1, 106 (2014); https://doi.org/10.1016/j.jnucmat.2014.05.027.
- Y.-H. PARK et al., “Optimization of Mass-Production Conditions for Tritium Breeder Pebbles Based on Slurry Droplet Wetting Method,” Fusion Eng. Des., 109–111, Part A, 443 (2016); https://doi.org/10.1016/j.fusengdes.2016.02.084.
- Y. ISHIDO et al., “Thermal Conductivity of Magnesium-Nickel Hydride Powder Beds in a Hydrogen Atmosphere,” Int. J. Hydrogen Energy, 7, 2, 173 (1982); https://doi.org/10.1016/0360-3199(82)90144-6.
- S. ANDRÉ et al., “Hot Wire Method for the Thermal Characterization of Materials: Inverse Problem Application,” Engenharia Térmica, 4, 55 (2003); http://dx.doi.org/10.5380/ret.v2i2.3470.
- J. HEALY et al., “The Theory of the Transient Hot-Wire Method for Measuring Thermal Conductivity,” Physica B+C, 82, 2, 392 (1976); https://doi.org/10.1016/0378-4363(76)90203-5.
- M. D. CHRISTOPHER, “Application of the Transient Hot-Wire Technique for Measurement of Effective Thermal Conductivity of Catalyzed Sodium Alanate for Hydrogen Storage,” Ph.D. Thesis, Virginia Polytechnic Institute and State University (2006).
- L. VOZÁR, “A Computer-Controlled Apparatus for Thermal Conductivity Measurement by the Transient Hot Wire Method,” J. Therm. Anal. Calorim., 46, 2, 495 (1996). https://doi.org/10.1007/BF02135027.
- ASTMC1113/C1113M, “Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)” (2013); https://www.astm.org/Standards/C1113.htm (current as of September 16, 2016).
- J. REIMANN and S. HERMSMEYER, “Thermal Conductivity of Compressed Ceramic Breeder Pebble Beds,” Fusion Eng. Des., 61, 345 (2002); https://doi.org/10.1016/S0920-3796(02)00165-5.
- S. SAITO et al., “Density Dependence on Thermal Properties of Li2TiO3 Pellets,” J. Nucl. Mater., 253, 1, 213 (1998); https://doi.org/10.1016/S0022-3115(97)00314-0.
- H. PETERSEN, “The Properties of Helium: Density, Specific Heats, Viscosity, and Thermal Conductivity at Pressures from 1 to 100 Bar and from Room Temperature to about 1800 K,” Tech. Rep. (1970); http://orbit.dtu.dk/files/52768509/ris_224.pdf (current as of September 16, 2016).
- H. TANIGAWA et al., “Measurement of Thermal Expansion of Li2TiO3 Pebble Beds,” Fusion Eng. Des., 82, 15, 2259 (2007); https://doi.org/10.1016/j.fusengdes.2007.06.023.
- M. ENOEDA et al., “Effective Thermal Conductivity Measurement of the Candidate Ceramic Breeder Pebble Beds by the Hot Wire Method,” Fusion Technol., 39, 2, 612 (2001).