References
- R. A. PITTS et al., “Physics Basis and Design of the ITER Plasma-Facing Components,” J. Nucl. Mater., 415, S957 (2011); https://doi.org/10.1016/j.jnucmat.2011.01.114.
- M. RIETH, EFDA Technical Meeting on DEMO, Garching, Germany, September 29–30, 2009.
- M. RIETH et al., “Review on the EFDA Programme on Tungsten Materials Technology and Science,” J. Nucl. Mater., 417, 463 (2013); https://doi.org/10.1016/j.jnucmat.2011.01.075.
- T. EICH et al., “Inter-ELM Power Decay Length for JET and ASDEX Upgrade: Measurement and Comparison with Heuristic Drift-Based Model,” Phys. Rev. Lett., 107, 215001 (2011); https://doi.org/10.1103/PhysRevLett.107.215001.
- D. MAISONNIER et al., “DEMO and Fusion Power Plant Conceptual Studies in Europe,” Fusion Eng. Des., 81, 1123 (2006); https://doi.org/10.1016/j.fusengdes.2005.08.055.
- C. KESSEL et al., “The ARIES Advanced and Conservative Tokamak Power Plant Study,” Fusion Sci. Technol., 67, 1, 1 (2015); https://dx.doi.org/10.13182/FST14-794.
- M. SHIMADA et al., J. Plasma Fusion Res. Ser., 3, 77 (2000).
- J. RAPP et al., “Integrated Scenario with Type-III ELMy H-Mode Edge: Extrapolation to ITER,” Nucl. Fusion, 49, 095012 (2009); https://doi.org/10.1088/0029-5515/49/9/095012.
- A. KALLENBACH et al., “Partial Detachment of High Power Discharges in ASDEX Upgrade,” Nucl. Fusion, 55, 053026 (2015); https://doi.org/10.1088/0029-5515/55/5/053026.
- J. RAPP et al., EU DEMO Workshop, 2011.
- A. KALLENBACH et al., “Non-Boronized Compared with Boronized Operation of ASDEX Upgrade with Full-Tungsten Plasma Facing Components,” Nucl. Fusion, 49, 045007 (2009); https://doi.org/10.1088/0029-5515/49/4/045007.
- J. RAPP et al., “Radiative Type-III ELMy H-Mode in All-Tungsten ASDEX Upgrade,” Nucl. Fusion, 52, 122002 (2012); https://doi.org/10.1088/0029-5515/52/12/122002.
- M. WISCHMEIER et al., 24th IAEA Fusion Energy Conference, St. Petersburg, Russia, October 13–18, 2014.
- A. HUBER et al., 41st EPS Conference on Plasma Physics, Berlin, Germany, June 23–27, 2014.
- M. KOTSCHENREUTHER et al., “Magnetic Geometry and Physics of Advanced Divertors: The X-Divertor and the Snowflake,” Phys. Plasmas, 20, 102507 (2013); https://doi.org/10.1063/1.4824735.
- M. KOTSCHENREUTHER et al., “On Heat Loading, Novel Divertors, and Fusion Reactors,” Phys. Plasmas, 14, 072502 (2007); https://doi.org/10.1063/1.2739422.
- P. M. VALANJU et al., “Super-X Divertors and High Power Density Fusion Devices,” Phys. Plasmas, 16, 056110 (2009); https://doi.org/10.1063/1.3110984.
- B. LABOMBARD et al., “ADX: A High Field, High Power Density, Advanced Divertor and RF Tokamak,” Nucl. Fusion, 55, 053020 (2015); https://doi.org/10.1088/0029-5515/55/5/053020.
- R. BEHRISCH et al., “Material Erosion at the Vessel Walls of Future Fusion Devices,” J. Nucl. Mater., 313–316, 388 (2003); https://doi.org/10.1016/S0022-3115(02)01580-5.
- N. DEN HARDER et al., “ELM-Resolved Divertor Erosion in the JET ITER-Like Wall,” Nucl. Fusion, 56, 026014 (2016); https://doi.org/10.1088/0029-5515/56/2/026014.
- S. LINDIG et al., “Sub-Surface Structures of ITER-Grade W (Japan) and Re-Crystallized W After ITER-Similar Low-Energy and High-Flux D Plasma Loadings,” Phys. Scr., T145, 014039 (2011); https://doi.org/10.1088/0031-8949/2011/T145/014039.
- Y. UEDA et al., “Development of Tungsten Materials for Plasma Facing Components in Japan,” Fusion Sci. Technol., 52, 513 (2007); https://doi.org/10.13182/FST07-A1540.
- M. J. BALDWIN et al., “Helium Induced Nanoscopic Morphology on Tungsten Under Fusion Relevant Plasma Conditions,” Nucl. Fusion, 48, 035001 (2008); https://doi.org/10.1088/0029-5515/48/3/035001.
- M. TOKITANI et al., “Exfoliation of the Tungsten Fibreform Nanostructure by Unipolar Arcing in the LHD Divertor Plasma,” Nucl. Fusion, 51, 102001 (2011); https://doi.org/10.1088/0029-5515/51/10/102001.
- J. COENEN et al., “Analysis of Tungsten Melt-Layer Motion and Splashing Under Tokamak Conditions at TEXTOR,” Nucl. Fusion, 51, 083008 (2011); https://doi.org/10.1088/0029-5515/51/8/083008.
- G. G. VAN EDEN et al., “The Effect of High-Flux H Plasma Exposure with Simultaneous Transient Heat Loads on Tungsten Surface Damage and Power Handling,” Nucl. Fusion, 54, 123010 (2014); https://doi.org/10.1088/0029-5515/54/12/123010.
- C. SHUANG et al., J. Nucl. Mater., 486, 267 (2017); https://doi.org/10.1016/j.jnucmat.2017.01.023.
- J. ROTH et al., “Recent Analysis of Key Plasma Wall Interactions Issues for ITER,” J. Nucl. Mater., 390–391, 1 (2009); https://doi.org/10.1016/j.jnucmat.2009.01.037.
- J. ROTH et al., “Flux Dependence of Carbon Chemical Erosion by Deuterium Ions,” Nucl. Fusion, 44, L21 (2004); https://doi.org/10.1088/0029-5515/44/11/L01.
- R. DOERNER et al., Nucl. Mater. Energy, 9, 89 (2017); https://doi.org/10.1016/j.nme.2016.04.008.
- V. BARABASH et al., “Material/Plasma Surface Interaction Issues Following Neutron Damage,” J. Nucl. Mater., 313–316, 42 (2003); https://doi.org/10.1016/S0022-3115(02)01330-2.
- G. A. COTTRELL, “Void Migration, Coalescence and Swelling in Fusion Materials,” Fusion Eng. Des., 66-68, 253 (2003); https://doi.org/10.1016/S0920-3796(03)00299-0.
- M. FUJISUKA et al., “Effect of Neutron Irradiation on Thermal Diffusivity of Tungsten–Rhenium Alloys,” J. Nucl. Mater., 283-287, 1148 (2000); https://doi.org/10.1016/S0022-3115(00)00170-7.
- T. TANNO et al., “Effects of Transmutation Elements on the Microstructural Evolution and Electrical Resistivity of Neutron-Irradiated Tungsten,” J. Nucl. Mater., 386–388, 218 (2009); https://doi.org/10.1016/j.jnucmat.2008.12.091.
- B. TYBURSKA et al., “Deuterium Retention in Self-Damaged Tungsten,” J. Nucl. Mater., 395, 150 (2009); https://doi.org/10.1016/j.jnucmat.2009.10.046.
- W. R. WAMPLER and R. DOERNER, “The Influence of Displacement Damage on Deuterium Retention in Tungsten Exposed to Plasma,” Nucl. Fusion, 49, 115023 (2009); https://doi.org/10.1088/0029-5515/49/11/115023.
- G. M. WRIGHT et al., “Hydrogenic Retention in Irradiated Tungsten Exposed to High-Flux Plasma,” Nucl. Fusion, 50, 075006 (2010); https://doi.org/10.1088/0029-5515/50/7/075006.
- M. H. J. ’T HOEN et al., “Saturation of Deuterium Retention in Self-Damaged Tungsten Exposed to High-Flux Plasmas,” Nucl. Fusion, 52, 023008 (2012); https://doi.org/10.1088/0029-5515/52/2/023008.
- M. SHIMADA et al., “First Result of Deuterium Retention in Neutron-Irradiated Tungsten Exposed to High Flux Plasma in TPE,” J. Nucl. Mater., 415, S667 (2011); https://doi.org/10.1016/j.jnucmat.2010.11.050.
- T. FANEY et al., “Spatially Dependent Cluster Dynamics Model of He Plasma Surface Interaction in Tungsten for Fusion Relevant Conditions,” Nucl. Fusion, 55, 013014 (2015); https://doi.org/10.1088/0029-5515/55/1/013014.
- D. F. JOHNSON and E. A. CARTER, “Hydrogen in Tungsten: Absorption, Diffusion, Vacancy Trapping, and Decohesion,” J. Mater. Res., 25, 315 (2010); https://doi.org/10.1557/JMR.2010.0036.
- V. K. H. ALIMOV et al., “The Effect of Displacement Damage on Deuterium Retention in ITER-Grade Tungsten Exposed to Low-Energy, High-Flux Pure and Helium-Seeded Deuterium Plasmas,” J. Nucl. Mater., 420, 370 (2012); https://doi.org/10.1016/j.jnucmat.2011.10.025.
- P. NORAJITRA et al., “Divertor Conceptual Designs for a Fusion Power Plant,” Fusion Eng. Des., 83, 893 (2008); https://doi.org/10.1016/j.fusengdes.2008.05.022.
- P. NORAJITRA et al., “Development of a Helium-Cooled Divertor: Material Choice and Technological Studies,” J. Nucl. Mater., 367–370, 1416 (2007); https://doi.org/10.1016/j.jnucmat.2007.04.027.
- D. L. YOUCHISON, “Flow Instabilities in Non-Uniformly Heated Helium Jet Arrays Used for Divertor PFCs,” Fusion Sci. Technol., 68, 3, 587 (2015); https://dx.doi.org/10.13182/FST14-901.
- M. JAWORSKI et al., International Conference on Plasma Surface Interactions in Controlled Fusion Devices, Rome, Italy, 2016.
- “Research Needs for Magnetic Fusion Energy Sciences – Report of the Research Needs Workshop (ReNeW),” Bethesda, Maryland, June 8–12, 2009; http://burningplasma.org/web/ReNeW/ReNeW.report.web2.pdf (current as of Sep. 16, 2016).
- J. RAPP et al., “Construction of the Plasma-Wall Experiment Magnum-PSI,” Fusion Eng. Des., 85, 1455 (2010); https://doi.org/10.1016/j.fusengdes.2010.04.009.
- B. UNTERBERG et al., “New Linear Plasma Devices in the Trilateral Euregio Cluster for an Integrated Approach to Plasma Surface Interactions in Fusion Reactors,” Fusion Eng. Des., 86, 1797 (2011); https://doi.org/10.1016/j.fusengdes.2011.03.082.
- J. RAPP et al., “The Development of Plasma-Material Interaction Facilities for the Future of Fusion Technology,” Fusion Sci. Technol., 64, 2, 237 (2013); https://dx.doi.org/10.13182/FST12-565.
- A. KALLENBACH et al., 23rd IAEA Fusion Energy Conference, San Diego, California, October 2012.
- R. GOULDING et al., “Progress in the Development of a High Power Helicon Plasma Source for the Materials Plasma Exposure Experiment,” Fusion Sci. Technol., 72 (2017); https://doi.org/10.1080/15361055.2017.1352429.
- J. RAPP et al., “Transport Simulations of Linear Plasma Generators with the B2.5-Eirene and EMC3-Eirene Codes,” J. Nucl. Mater., 463, 510 (2015); https://doi.org/10.1016/j.jnucmat.2014.12.058.
- J. RAPP et al., “The Development of the Material Plasma Exposure Experiment,” IEEE Trans. Plasma Sci., 44, 3456 (2016); https://doi.org/10.1109/TPS.2016.2628326.
- R. P. DOERNER et al., “Retention in Tungsten Resulting from Extremely High Fluence Plasma Exposure,” Nucl. Mater. Energy, 9, 89 (2016); https://doi.org/10.1016/j.nme.2016.04.008.