References
- L. BROMBERG et al., “Options for the Use of High Temperature Superconductor in Tokamak Fusion Reactor Designs,” Fusion Eng. Des., 54, 2, 167 (2001); https://doi.org/10.1016/S0920-3796(00)00432-4.
- H. HASHIZUME et al., “Advanced Fusion Reactor Design Using Remountable HTc SC Magnet,” J. Plasma Fusion Res. Ser., 5, 532 (2002).
- Z. S. HARTWIG et al., “An Initial Study of Demountable High-Temperature Superconducting Toroidal Field Magnets for the Vulcan Tokamak Conceptual Design,” Fusion Eng. Des., 87, 3, 201 (2012); https://doi.org/10.1016/j.fusengdes.2011.10.002.
- B. N. SORBOM et al., “ARC: A Compact, High-Field, Fusion Nuclear Science Facility and Demonstration Power Plant with Demountable Magnets,” Fusion Eng. Des., 100, 378 (2015); https://doi.org/10.1016/j.fusengdes.2015.07.008.
- A. SAGARA et al., “Helical Reactor Design FFHR-d1 and c1 for Steady-State DEMO,” Fusion Eng. Des., 89, 9–10, 2114 (2014); https://doi.org/10.1016/j.fusengdes.2014.02.076.
- N. YANAGI et al., “Design Progress on the High-Temperature Superconducting Coil Option for the Heliotron-Type Fusion Energy Reactor FFHR,” Fusion Sci. Technol., 60, 2, 648 (2011); https://doi.org/10.13182/FST60-648.
- H. HASHIZUME and S. ITO, “Design Prospect of Remountable High-Temperature Superconducting Magnet,” Fusion Eng. Des., 89, 9–10, 2241 (2014); https://doi.org/10.1016/j.fusengdes.2013.12.014.
- N. YANAGI et al., “Design and Development of High-Temperature Superconducting Magnet System with Joint-Winding for the Helical Fusion Reactor,” Nucl. Fusion, 55, 053021 (2015); https://doi.org/10.1088/0029-5515/55/5/053021.
- S. ITO et al., “Fundamental Investigation on Tensile Characteristics of Mechanical Lap Joint of a REBCO Tape,” IEEE Trans. Appl. Supercond., 25, 3, 4201025 (2015); https://doi.org/10.1109/TASC.2014.2369058.
- S. ITO et al., “Mechanical and Electrical Characteristics of a Bridge-Type Mechanical Lap Joint of HTS STARS Conductors,” IEEE Trans. Appl., Supercond., 26, 2, 4201510 (2016); https://doi.org/10.1109/TASC.2016.2517197.
- K. KAWAI et al., “Optimization of a Mechanical Bridge Joint Structure in a Stacked HTS Conductor,” IEEE Trans. Appl. Supercond., 23, 3, 6409408 (2013); https://doi.org/10.1109/TASC.2013.2239335.
- S. ITO et al., “Bridge-Type Mechanical Lap Joint of a 100 kA-class HTS Conductor Having Stacks of GdBCO Tapes,” Plasma Fusion Res., 9, 3405086 (2014); https://doi.org/10.1585/pfr.9.3405086.
- L. APARICIO et al., “Evaluation of Shear Strength in Soldered and Mechanical Lap Joints of High-Temperature Superconducting Tapes Intended for a Remountable Magnet,” Plasma Fusion Res., 11, 2405065 (2016); https://doi.org/10.1585/pfr.11.2405065.
- R. D. ADAMS and W. C. WAKE, Structural Adhesive Joints in Engineering, Chap. 1, Elsevier Appl. Sci. Publishers, England (1984).
- M. SUGANO et al., “The Effect of the 2D Internal Strain State on the Critical Current in GdBCO Coated Conductors,” Supercond. Sci. Technol., 25, 054014 (2012); https://doi.org/10.1088/0953-2048/25/5/054014.
- T. NISHIO et al., “Reducing Joint Resistance by Heat Treatment During Fabrication of a Mechanical Joint of High-Temperature Superconducting Conductors,” IEEE Trans. Appl. Supercond., 26, 4, 4800505 (2016); https://doi.org/10.1109/TASC.2016.2521891.