References
- G. FEDERICI et al., “Plasma-Material Interactions in Current Tokamaks and Their Implications for Next Step Fusion Reactors,” Nucl. Fusion, 41, 12R, 1967 (2001); https://doi.org/10.1088/0029-5515/41/12/218.
- J. ROTH and K. SCHMID, “Hydrogen in Tungsten as Plasma-Facing Material,” Phys. Scripta, T145, 014031 (2011); https://doi.org/10.1088/0031-8949/2011/T145/014031.
- C. H. SKINNER et al., “Recent Advances on Hydrogen Retention in ITER’s Plasma-Facing Materials: Beryllium, Carbon, and Tungsten,” Fusion Sci. Technol., 54, 4, 891 (2008); https://doi.org/10.13182/FST54-891.
- R. A. CAUSEY and T. J. VENHAUS, “The Use of Tungsten in Fusion Reactors: A Review of the Hydrogen Retention and Migration Properties,” Phys. Scripta, T94, 9 (2001); https://doi.org/10.1238/Physica.Topical.094a00009.
- N. YOSHIDA, “Review of Recent Works in Development and Evaluation of High-Z Plasma Facing Materials,” J. Nucl. Mater., 266–269, 197 (1999); https://doi.org/10.1016/S0022-3115(98)00817-4.
- M. BALDEN et al., “Deuterium Retention and Morphological Modifications of the Surface in Five Grades of Tungsten After Deuterium Plasma Exposure,” J. Nucl. Mater., 452, 1–3, 248 (2014); https://doi.org/10.1016/j.jnucmat.2014.05.018.
- L. E. SAMUELS, Chapter 8, Polishing with Abrasives: Surface Damage, Metallographic Polishing by Mechanical Methods, ASM International, Materials Park, Ohio (2003).
- L. M. GARRISON and G. L. KULCINSKI, “The Effects of Tungsten’s Pre-Irradiation Surface Condition on Helium-Irradiated Morphology,” J. Nucl. Mater., 466, 302 (2015); https://doi.org/10.1016/j.jnucmat.2015.07.025.
- F. W. MEYER, et al., “Recent Activities at the ORNL Multicharged Ion Research Facility,” ECRIS2010, Grenoble, France, August 23–26, 2010 (2011).
- F. W. MEYER, “ECR-Based Atomic Collision Physics Research at ORNL MIRF,” Trapping Highly Charged Ions: Fundamentals and Applications, pp. 117–164, J. GILLASPY, Ed., Nova Science Publishers, New York (2000).
- H. HIJAZI and F. W. MEYER, “A Large-Acceptance Beam-Deceleration Module for Retrofitting into Ion-Source Beam Lines,” Rev. Sci. Instrum., 84, 033305 (2013); https://doi.org/10.1063/1.4794740.
- M. E. BANNISTER et al., “Surface-Conductivity Enhancement of PMMA by keV-energy Metal-Ion Implantation,” Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. Atoms, 339, 75 (2014); https://doi.org/10.1016/j.nimb.2014.02.133.
- SRIM (2013), www.srim.org (current as of Sep. 23, 2016).
- O. V. OGORODNIKOVA et al., “Ion-Driven Deuterium Retention in Tungsten,” J. Appl. Phys., 103, 034902 (2008); https://doi.org/10.1063/1.2828139.
- S. RYABTSEV et al., Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. Atoms, 382 (2016).
- A. MANHARD et al., “Influence of the Microstructure on the Deuterium Retention in Tungsten,” J. Nucl. Mater., 415, 1, S632 (2011); https://doi.org/10.1016/j.jnucmat.2010.10.045.
- C. M. PARISH et al., “Effect of Tungsten Crystallographic Orientation on He-Ion-Induced Surface Morphology Changes,” Acta Mater., 62, 173 (2014); https://doi.org/10.1016/j.actamat.2013.09.045.
- M. OYA et al., “Deuterium Retention in Various Toughened, Fine-Grained Recrystallized Tungsten Materials Under Different Irradiation Conditions,” Phys. Scripta, T159, 014048 (2014); https://doi.org/10.1088/0031-8949/2014/T159/014048.
- Z. FU et al., “Thermal Desorption and Surface Modification of He+ Implanted into Tungsten,” J. Nucl. Mater., 329–333, 692 (2004); https://doi.org/10.1016/j.jnucmat.2004.04.190.
- M. J. BALDWIN and R. P. DOERNER, “Formation of Helium Induced Nanostructure ‘Fuzz’ on Various Tungsten Grades,” J. Nucl. Mater., 404, 3, 165 (2010); https://doi.org/10.1016/j.jnucmat.2010.06.034.
- X. JIANG et al., Design and Development of a LIBS System on Linear Plasma Device PSI-2 for in Situ Real-Time Diagnostics of Plasma-Facing Materials, Nuclear Materials and Energy (2016).
- S. BREZINSEK et al., “Fuel Retention Studies with the ITER-Like Wall in JET,” Nucl. Fusion, 53, 8, 083023 (2013); https://doi.org/10.1088/0029-5515/53/8/083023.
- A. B. ANTONIAZZI et al., “Correlation of Tritium Outgassing from Metal Surfaces with Surface Smearing,” IEEE/NPSS Symp. Fusion Eng., 2, 975 (1994).
- V. PHILIPPS and J. EHRENBERG, “Analysis of Outgassing After Joint European Torus Discharges Under Beryllium First Wall Conditions,” J. Vac. Sci. Technol. A: Vac., Surf., Films, 11, 2, 437 (1993); https://doi.org/10.1116/1.578750.
- T. OTSUKA et al., “Retention and Release Mechanisms of Tritium Loaded in Plasma-Sprayed Tungsten Coatings by Plasma Exposure,” J. Nucl. Mater., 438, S1048 (2013); https://doi.org/10.1016/j.jnucmat.2013.01.229.
- K. A. MOSHKUNOV et al., “Air Exposure and Sample Storage Time Influence on Hydrogen Release from Tungsten,” J. Nucl. Mater., 404, 3, 174 (2010); https://doi.org/10.1016/j.jnucmat.2010.07.011.