References
- D. NAUJOKS et al., “Tungsten as Target Material in Fusion Devices,” Nucl. Fusion, 36, 671 (1996); https://doi.org/10.1088/0029-5515/36/6/I01.
- H. BOLT et al., “Plasma Facing and High Heat Flux Materials—Needs for ITER and Beyond,” J. Nucl. Mater., 307–311, 43 (2002); https://doi.org/10.1016/S0022-3115(02)01175-3.
- G. A. COTTRELL, “Sigma Phase Formation in Irradiated Tungsten, Tantalum and Molybdenum in a Fusion Power Plant,” J. Nucl. Mater., 334, 166 (2004); https://doi.org/10.1016/j.jnucmat.2004.07.001.
- L. GREENWOOD and F. A. GARNER, “Transmutation of Mo, Re, W, Hf, and V in Various Irradiation Test Facilities and STARFIRE,” J. Nucl. Mater., 212–215, 635 (1994); https://doi.org/10.1016/0022-3115(94)90136-8.
- M. R. GILBERT and J.-C. SUBLET, “Neutron-Induced Transmutation Effects in W and W-Alloys in a Fusion Environment,” Nucl. Fusion, 51, 043005 (2011); https://doi.org/10.1088/0029-5515/51/4/043005.
- T. NODA, M. FUJITA, and M. OKADA, “Transmutation and Induced Radioactivity of W in the Armor and First Wall of Fusion Reactors,” J. Nucl. Mater., 258–263, 934 (1998); https://doi.org/10.1016/S0022-3115(98)00088-9.
- R. WILLIAMS et al., “Irradiation Induced Precipitation in Tungsten Based, W-Re Alloys,” Metall. Mater. Trans. A, 14, 655 (1983); https://doi.org/10.1007/BF02643781.
- R. HERSCHITZ and D. N. SEIDMAN, “An Atomic Resolution Study of Homogeneous Radiation-Induced Precipitation in a Neutron Irradiated W-10 at.% Re Alloy,” Acta Metall., 32, 1141 (1984); https://doi.org/10.1016/0001-6160(84)90121-4.
- R. HERSCHITZ and D. N. SEIDMAN, “An Atomic Resolution Study of Radiation-Induced Precipitation and Solute Segregation Effects in a Neutron-Irradiated W-25 at.% Re Alloy,” Acta Metall., 32, 1155 (1984); https://doi.org/10.1016/0001-6160(84)90122-6.
- T. TANNO et al., “Microstructure Development in Neutron Irradiated Tungsten Alloys,” Mater. Trans., 52, 1447 (2011); https://doi.org/10.2320/matertrans.MBW201025.
- Y. NEMOTO et al., “Microstructural Development of Neutron Irradiated W–Re Alloys,” J. Nucl. Mater., 283, 1144 (2000); https://doi.org/10.1016/S0022-3115(00)00290-7.
- T. TANNO et al., “Precipitation of Solid Transmutation Elements in Irradiated Tungsten Alloys,” Mater. Trans., 49, 2259 (2008); https://doi.org/10.2320/matertrans.MAW200821.
- T. KOYANAGI et al., “Microstructural Evolution of Pure Tungsten Neutron Irradiated with a Mixed Energy Spectrum,” J. Nucl. Mater., 490, 66 (2017); https://doi.org/10.1016/j.jnucmat.2017.04.010.
- X. HU et al., “Irradiation Hardening of Pure Tungsten Exposed to Neutron Irradiation,” J. Nucl. Mater., 480, 235 (2016); https://doi.org/10.1016/j.jnucmat.2016.08.024.
- A. XU et al., “Ion-Irradiation Induced Clustering in W-Re-Ta, W-Re and W-Ta Alloys: An Atom Probe Tomography and Nanoindentation Study,” Acta Mater., 124, 71 (2017); https://doi.org/10.1016/j.actamat.2016.10.050.
- M. FUKUDA et al., “Neutron Energy Spectrum Influence on Irradiation Hardening and Microstructural Development of Tungsten,” J. Nucl. Mater., 479, 249 (2016); https://doi.org/10.1016/j.jnucmat.2016.06.051.
- M. FUKUDA et al., “Effects of Re Content and Fabrication Process on Microstructural Changes and Hardening in Neutron Irradiated Tungsten,” Mater. Trans., 53, 2145 (2012); https://doi.org/10.2320/matertrans.MBW201110.
- M. FUKUDA et al., “Microstructural Development of Tungsten and Tungsten–Rhenium Alloys due to Neutron Irradiation in HFIR,” J. Nucl. Mater., 455, 460 (2014); https://doi.org/10.1016/j.jnucmat.2014.08.002.
- A. HASEGAWA et al., “Neutron Irradiation Effects on the Microstructural Development of Tungsten and Tungsten Alloys,” J. Nucl. Mater., 471, 175 (2016); https://doi.org/10.1016/j.jnucmat.2015.10.047.
- A. HASEGAWA et al., “Neutron Irradiation Effects on Tungsten Materials,” Fusion Eng. Des., 89, 1568 (2014); https://doi.org/10.1016/j.fusengdes.2014.04.035.
- L. M. GARRISON et al., “PHENIX U.S.-Japan Collaboration Investigation of Thermal and Mechanical Properties of Thermal Neutron–Shielded Irradiated Tungsten,” Fusion Sci. Technol., 75, 499 (2019); https://doi.org/10.1080/15361055.2019.1602390.
- C. PARISH et al., “LAMDA: Irradiated-Materials Microscopy at Oak Ridge National Laboratory,” Microsc. Microanal., 21, Suppl. 3, 1003 (2015); https://doi.org/10.1017/S1431927615005814.
- S. ANTUSCH et al., “Mechanical and Microstructural Investigations of Tungsten and Doped Tungsten Materials Produced via Powder Injection Molding,” Nucl. Mater. Energy, 3–4, 22 (2015); https://doi.org/10.1016/j.nme.2015.04.002.
- E. LANG et al., “Microstructural and Compositional Effects of Transition Metal Carbide Additions on Dispersion-Strengthened Tungsten Fabricated via Spark Plasma Sintering,” Int. J. Refract. Met. Hard Mate., 75, 279 (2018); https://doi.org/10.1016/j.ijrmhm.2018.04.015.
- Y. KITSUNAI et al., “Microstructure and Impact Properties of Ultra-Fine Grained Tungsten Alloys Dispersed with TiC,” J. Nucl. Mater., 271–272, 423 (1999); https://doi.org/10.1016/S0022-3115(98)00753-3.
- J. REISER et al., “Ductilisation of Tungsten (W): On the Increase of Strength and Room-Temperature Tensile Ductility Through Cold-Rolling,” Int. J. Refract. Met. Hard Mater., 64, 261 (2017); https://doi.org/10.1016/j.ijrmhm.2016.10.018.
- A. G. SHARD, “Detection Limits in XPS for More than 6000 Binary Systems Using Al and Mg Kα X‐Rays,” Surf. Interface Anal., 46, 175 (2014); https://doi.org/10.1002/sia.v46.3.
- E. M. SAVITSKII et al., “Properties of Tungsten-Rhenium Alloys,” Metal Sci. Heat Treat. Metals, 2, 483 (1960); https://doi.org/10.1007/BF00649725.
- R. I. JAFFEE et al., “The Effect of Rhenium on the Fabricability and Ductility of Molybdenum and Tungsten,” Technical Report to Department of the Navy Office of Naval Research Contract Nonr-1512 (00), Battelle Memorial Institute (1958).