References
- B. EWAN and R. ALLEN, “A Figure of Merit Assessment of the Routes to Hydrogen,” Int. J. Hydrogen Energy, 30, 809 (2005); https://doi.org/10.1016/j.ijhydene.2005.02.003.
- C. McGREAVEY and M. W. NEWMANN, “Development of a Mathematical Model of a Steam Methane Reformer,” Proc. Conf. Industrial Applications of Dynamic Modelling, Durham, North Carolina (1969).
- D. LATHAM et al., “Mathematical Modeling of an Industrial Steam-Methane Reformer for On-Line Deployment,” Fuel Process. Technol., 92, 1574 (2011); https://doi.org/10.1016/j.fuproc.2011.04.001.
- A. ZAMANIYAN, H. EBRAHIMI, and J. MOHAMMADZADEH, “A Unified Model for Top Fired Methane Steam Reformers Using Three-Dimensional Zonal Analysis,” Chem. Eng. Process. Process Intensif, 47, 946 (2008); https://doi.org/10.1016/j.cep.2007.03.005.
- G. PANTOLEONTOS, E. KIKKINIDES, and M. GEORGIADIS, “A Heterogeneous Dynamic Model for the Simulation and Optimisation of the Steam Methane Reforming Reactor,” Int. J. Hydrogen Energy, 37, 16346 (2012); https://doi.org/10.1016/j.ijhydene.2012.02.125.
- M. PEDERNERA et al., “Use of a Heterogeneous Two-Dimensional Model to Improve the Primary Steam Reformer Performance,” Chem. Eng. J., 94, 29 (2003); https://doi.org/10.1016/S1385-8947(03)00004-4.
- Y. SEO et al., “Investigation of the Characteristics of a Compact Steam Reformer Integrated with a Water-Gas Shift Reactor,” J. Chem. Eng. Jpn., 161, 1208 (2006); https://doi.org/10.1016/j.jpowsour.2006.05.039.
- M. KUROKI, S. OOKAWARA, and K. OGAWA, “A High-Fidelity CFD Model of Methane Steam Reforming in a Packed Bed Reactor,” J. Chem. Eng. Japan, 42, S73 (2009); https://doi.org/10.1252/jcej.08we256.
- H. AMIRSHAGHAGHI et al., “Numerical Simulation of Methane Partial Oxidation in the Burner and Combustion Chamber of Autothermal Reformer,” Appl. Math. Modell., 34, 2312 (2010); https://doi.org/10.1016/j.apm.2009.10.039.
- J. XU and G. F. FROMENT, “Methane Steam Reforming, Methanation and Water-Gas Shift: I. Intrinsic Kinetics,” AlChE J., 35, 88 (1989); https://doi.org/10.1002/aic.690350109.
- W. CHEN et al., “Modeling and Simulation of Hydrogen Generation from High-temperature and Low-temperature Water Gas Shift Reactions,” Int. J. Hydrogen Energy, 33, 6644 (2008); https://doi.org/10.1016/j.ijhydene.2008.08.039.
- D. G. OLIVA et al., “CO-PrOx Reactor Design by Model-Based Optimization,” J. Power Sources, 182, 307 (2008); https://doi.org/10.1016/j.jpowsour.2008.03.043.
- K. KANG et al., “Modeling and Simulations of Fuel Cell Systems for Combined Heat and Power Generation,” Int. J. Hydrogen Energy, 41, 8286 (2016); https://doi.org/10.1016/j.ijhydene.2015.11.089.