References
- M. D. SHARPE et al., “Partitioning of Tritium Between Surface and Bulk of 316 Stainless Steel at Room Temperature,” Fusion Eng. Des., 130, 76 (2018); https://doi.org/10.1016/j.fusengdes.2018.03.028.
- F. YANG et al., “Tritium Permeation Characterization of Al2O3/FeAl Coatings as Tritium Permeation Barriers on 321-Type Stainless Steel Containers,” J. Nucl. Mater, 478, 144 (2016); https://doi.org/10.1016/j.jnucmat.2016.06.001.
- G. K. ZHANG et al., “An Advance Process of Aluminum Rich Coating as Tritium Permeation Barrier on 321 Steel Workpiece,” Fusion Eng. Des., 87, 7–8, 1370 (2012); https://doi.org/10.1016/j.fusengdes.2012.03.015.
- T. WANG et al., “Sol-gel Prepared Al2O3 Coatings for the Application as Tritium Permeation Barrier,” Fusion Eng. Des., 85, 1068 (2010); https://doi.org/10.1016/j.fusengdes.2010.01.021.
- M. NAKAMICHI, H. KAWAMURA, and T. TERATANI, “Characterization of Chemical Densified Coating as Tritium Permeation Barrier,” J. Nucl. Sci. Technol., 38, 11, 1007 (2001); https://doi.org/10.1080/18811248.2001.9715130.
- G. S. HIGASHI and C. G. FLEMING, “Sequential Surface Chemical Reaction Limited Growth of High Quality Al2O3 Dielectrics,” Appl. Phys. Lett., 55, 1963 (1989); https://doi.org/10.1063/1.102337.
- F. ZAERA, “The Surface Chemistry of Atomic Layer Depositions of Solid Thin Films,” J. Phys. Chem. Lett., 3, 10, 1301 (2012); https://doi.org/10.1021/jz300125f.
- A. C. DILLON et al., “Surface Chemistry of Al2O3 Deposition Using Al(CH3)3and H2O in a Binary Reaction Sequence,” Surf. Sci., 322, 230 (1995); https://doi.org/10.1016/0039-6028(95)90033-0.
- R. L. PUURUNEN, “Surface Chemistry of Atomic Layer Deposition: A Case Study for the Trimethylaluminum/Water Process,” J. Appl. Phys., 97, 121301 (2005); https://doi.org/10.1063/1.1940727.
- D. N. GOLDSTEIN, J. A. McCORMICK, and S. M. GEORGE, “Al2O3 Atomic Layer Deposition with Trimethylaluminum and Ozone Studied by in Situ Transmission FTIR Spectroscopy and Quadrupole Mass Spectrometry,” J. Phys. Chem. C, 112, 19530 (2008); https://doi.org/10.1021/jp804296a.
- O. M. E. YLIVAARA et al., “Aluminum Oxide from Trimethylaluminum and Water by Atomic Layer Deposition: The Temperature Dependence of Residual Stress, Elastic Modulus, Hardness and Adhesion,” Thin Solid Films, 552, 124 (2014); https://doi.org/10.1016/j.tsf.2013.11.112.
- G. C. CORREA, B. BAO, and N. C. STRANDWITZ, “Chemical Stability of Titania and Alumina Thin Films Formed by Atomic Layer Deposition,” ACS Appl. Mater. Interfaces, 7, 27, 14816 (June 25, 2015); https://doi.org/10.1021/acsami.5b03278.
- V. CIMALLA et al., “Densification of Thin Aluminum Oxide Films by Thermal Treatments,” Mater. Sci. Appl., 05, 8, 628 (2014); https://doi.org/10.4236/msa.2014.58065.
- A. RÜCKERL et al., “Characterization and Prevention of Humidity Related Degradation of Atomic Layer Deposited Al2O3,” Cit. J. Appl. Phys., 121, 25306 (2017); https://doi.org/10.1063/1.4973583.
- W. T. SHMAYDA et al., “Dependence of Tritium Release from Stainless Steel on Temperature and Water Vapor,” Fusion Sci. Technol., 68, 4, 766 (2014); https://doi.org/10.13182/fst14-913.
- M. D. SHARPE, C. FAGAN, and W. T. SHMAYDA, “Distribution of Tritium in the Near Surface of Stainless-Steel 316,” Fusion Sci. Technol., 75, 1053 (2019); https://doi.org/10.1080/15361055.2019.1644136.
- K. G. SUN et al., “pH-Controlled Selective Etching of Al2O3 over ZnO,” ACS Appl. Mater. Interfaces, 6, 10, 7028 (2014); https://doi.org/10.1021/am501912q.
- A. N. PEREVEZENTSEV et al., “Study of Tritium Distribution in Various Metals,” Fusion Sci. Technol., 48, 1, 208 (2017); https://doi.org/10.13182/fst48-208.