References
- K. YAMAZAKI and T. OISHI, “Tritium Fuel System Assessment on Economics and CO2 Emissions in DT Fusion Reactors,” Fusion Sci. Technol., 60, 3, 1109 (2011); https://doi.org/10.13182/FST11-A12609.
- Y. IWAI et al., “Case Study on Unexpected Tritium Release Happened in a Ventilated Room of Fusion Reactor,” Fusion Sci. Technol., 48, 1, 460 (2005); https://doi.org/10.13182/FST05-A965.
- T. TANABE and M. NISHIKAWA, “Fuel Flow and Balance in a D–T Fusion Reactor,” Tritium: Fuel of Fusion Reactors, pp. 49–71, Springer, Tokyo, Japan (2017); https://doi.org/10.1007/978-4-431-56460-7_3.
- K. ISOBE, “Contamination and Decontamination,” Tritium: Fuel of Fusion Reactors, pp. 231–241, Springer, Tokyo, Japan (2017); https://doi.org/10.1007/978-4-431-56460-7_10.
- M. TOYOSHIMA et al., “Development of a Sensitive Assay System for Tritium Risk Assessment Using Rev1 Transgenic Mouse,” Fusion Sci. Technol., 60, 3, 1204 (2011); https://doi.org/10.13182/FST11-A12632.
- “Safe Handling of Tritium Review of Data and Experience,” Technical Reports Series No. 324, p. 1, International Atomic Energy Agency (1991).
- K. KATAYAMA and M. NISHIKAWA, “Safety Confinement System,” Tritium: Fuel of Fusion Reactors, pp. 297–329, Springer, Tokyo, Japan (2017); https://doi.org/10.1007/978-4-431-56460-7_14.
- C. W. FORSBERG et al., “Tritium Control and Capture in Salt-Cooled Fission and Fusion Reactors,” Fusion Sci. Technol., 71, 4, 584 (2017); https://doi.org/10.1080/15361055.2017.1289450.
- R. J. PEARSON et al., “Romanian Tritium for Nuclear Fusion,” Fusion Sci. Technol., 71, 4, 610 (2017); https://doi.org/10.1080/15361055.2017.1290931.
- K. A. TERRANI, “Accident Tolerant Fuel Cladding Development: Promise, Status, and Challenges,” J. Nucl. Mater., 501, 13, 13 (2018); https://doi.org/10.1016/j.jnucmat.2017.12.043.
- K. DYLST et al., “Removing Tritium and Other Impurities During Industrial Recycling of Beryllium from a Fusion Reactor,” Fusion Sci. Technol., 54, 1, 215 (2008); https://doi.org/10.13182/FST08-A1798.
- K. KATAYAMA and M. NISHIKAWA, “Recovery of Tritium Bred in Blanket,” Tritium: Fuel of Fusion Reactors, pp. 273–294, Springer, Tokyo, Japan (2017); https://doi.org/10.1007/978-4-431-56460-7_13.
- T. BAK, J. NOWOTNY, and C. C. SORRELL, “Electrical Properties of Metal Oxides at Elevated Temperatures,” Key Eng. Mater., 125–126, 1 (1996); https://doi.org/10.4028/www.scientific.net/KEM.125-126.1.
- D. JEANNOT et al., “Physical and Chemical Properties of Metal Oxide Additions to Ag-SnO/sub 2/ Contact Materials and Predictions of Electrical Performance,” IEEE Trans. Compon. Packag. Manuf. Technol. A, 17, 1, 17 (1994); https://doi.org/10.1109/95.296363.
- D. PHELAN et al., “Structural, Transport, and Magnetic Properties of Narrow Bandwidth Nd1−xCaxCoO3−δ and Comparisons to Pr1−xCaxCoO3−δ,” Phys. Rev. B, 88, 7, 075119 (2013); https://doi.org/10.1103/PhysRevB.88.075119.
- C. W. FORSBERG et al., “Tritium Control and Capture in Salt-Cooled Fission and Fusion Reactors: Status, Challenges, and Path Forward,” Nucl. Technol., 197, 2, 119 (2017); https://doi.org/10.13182/NT16-101.
- J. P. COUTURES, R. VERGES, and M. FOEX, “Valerus comparées des temperatures de solidification des différents sesquioxydes de terres rares; influence de l’atmosphère,” Rev. Int. Hautes Tempér. Réfract. Fr., 12, 2, 181 (1975).
- M. ZINKEVICH, “Thermodynamics of Rare Earth Sesquioxides,” Prog. Mater. Sci., 52, 4, 597 (2007); https://doi.org/10.1016/j.pmatsci.2006.09.002.
- R. GILLEN, S. J. CLARK, and J. ROBERTSON, “Nature of the Electronic Band Gap in Lanthanide Oxides,” Phys. Rev. B, 87, 12, 125116 (2013); https://doi.org/10.1103/PhysRevB.87.125116.
- R. D. SHANNON et al., “Dielectric Constants of Yttrium and Rare-Earth Garnets, the Polarizability of Gallium Oxide, and the Oxide Additivity Rule,” J. Appl. Phys., 67, 8, 3798 (1990); https://doi.org/10.1063/1.345026.
- D. XUE, K. BETZLER, and H. HESSE, “Dielectric Constants of Binary Rare-Earth Compounds,” J. Phys. Condens. Matter, 12, 13, 3113 (2000); https://doi.org/10.1088/0953-8984/12/13/319.
- S. SATO et al., “Basic Properties of Rare Earth Oxides,” Appl. Catal. A Gen., 356, 1, 57 (2009); https://doi.org/10.1016/j.apcata.2008.12.019.
- G. AZIMI et al., “Hydrophobicity of Rare-Earth Oxide Ceramics,” Nat. Mater., 12, 4, 315 (2013); https://doi.org/10.1038/nmat3545.
- W. MAO et al., “Hydrogen Isotope Dissolution, Diffusion, and Permeation in Er2O3,” J. Power Sources, 303, 168 (2016); https://doi.org/10.1016/j.jpowsour.2015.10.091.
- T. CHIKADA et al., “Crystallization and Deuterium Permeation Behaviors of Yttrium Oxide Coating Prepared by Metal Organic Decomposition,” Nucl. Mater. Energy, 9, 529 (2016); https://doi.org/10.1016/j.nme.2016.06.009.
- K. TAKAHASHI et al., “Development of ‘BAS-ND’ Imaging Plate for Neutron Detection,” Fujifilm Res. Dev., 44, 41 (1999).
- K. HASHIZUME et al., “Study on Kinetics of Hydrogen Dissolution and Hydrogen Solubility in Oxides Using Imaging Plate Technique,” J. Nucl. Mater., 442, 1–3, S880 (2013); https://doi.org/10.1016/j.jnucmat.2013.05.038.
- F. J. CASTRO and G. MEYER, “Thermal Desorption Spectroscopy (TDS) Method for Hydrogen Desorption Characterization (I): Theoretical Aspects,” J. Alloys Compd., 330–332, 59 (2002); https://doi.org/10.1016/S0925-8388(01)01625-5.
- B. J. MERRILL, “TMAP4 Tritium Migration Analysis Program Code, Description and User’s Manual,” EGG-FSP-10315, EG&G Idaho.
- T. VENHAUS et al., “Behavior of Tungsten Exposed to High Fluences of Low Energy Hydrogen Isotopes,” J. Nucl. Mater., 290–293, 505 (2001); https://doi.org/10.1016/S0022-3115(00)00443-8.
- M. HIGAKI et al., “Determination of Hydrogen Diffusion Coefficients in F82H by Hydrogen Depth Profiling with a Tritium Imaging Plate Technique,” Fusion Sci. Technol., 67, 379 (2015); https://doi.org/10.13182/FST14-T33.
- K. YAMASHITA, T. OTSUKA, and K. HASHIZUME, “Hydrogen Solubility and Diffusivity in a Barium Cerate Protonic Conductor Using Tritium Imaging Plate Technique,” Solid State Ionics, 275, 43 (2015); https://doi.org/10.1016/j.ssi.2015.02.008.
- Y. YAMAUCHI, Y. HIROHATA, and T. HINO, “Deuterium Retention and Desorption Behavior in Oxidized Ferritic Steel,” J. Nucl. Mater., 363–365, 984 (2007); https://doi.org/10.1016/j.jnucmat.2007.01.136.
- K. HASHIZUME and Y. OKI, “Using a Tritium Imaging Plate Technique to Measure the Hydrogen Solubility and Diffusivity of Zr-Doped BaInO2.5,” Fusion Sci. Technol., 71, 3, 344 (2017); https://doi.org/10.1080/15361055.2017.1291036.
- J.-C. LEE and S.-H. AHN, “Bulk Density Measurement of Porous Functionally Graded Materials,” Int. J. Precis. Eng. Manuf., 19, 1, 31 (2018); https://doi.org/10.1007/s12541-018-0004-4.
- S. MAHER et al., “Mapping the Stability Diagram of a Quadrupole Mass Spectrometer with a Static Transverse Magnetic Field Applied,” J. Am. Soc. Mass Spectrom., 24, 8, 1307 (2013); https://doi.org/10.1007/s13361-013-0654-5.
- J. H. LECK, Total and Partial Pressure Measurement in Vacuum Systems, Springer US, Boston, Massachusetts (1988); https://doi.org/10.1007/978-1-4613-0877-5.
- P. SHEWMON, Diffusion in Solids, McGraw-Hill, New York (1976).