201
Views
0
CrossRef citations to date
0
Altmetric
Technical Papers

Inhibition Effect of CO on Hydrogen Permeation Through a Pd/Al2O3 Composite Membrane: A Comprehensive Study on Concentration Polarization and Competitive Adsorption Effect

, , , , , , , , & show all
Pages 680-689 | Received 09 Jun 2019, Accepted 29 Apr 2020, Published online: 09 Jul 2020

References

  • I. CHOI et al., “Catalytic Steam Reforming of Biomass-Derived Acid over Modified Ni/γ-Al2O3 for Sustainable Hydrogen Production,” Int. J. Hydrogen Energy, 44, 180 (2019); https://doi.org/10.1016/j.ijhydene.2018.04.192.
  • L. YUE et al., “Thermal Stable Pd@mesoporous Silica Core-Shell Nanocatalysts for Dry Reforming of Methane with Good Coke-Resistant Performance,” Fuel, 218, 335 (2018); https://doi.org/10.1016/j.fuel.2018.01.052.
  • M. M. RAHMAN et al., “Evaluation and Characterization of Pd-Ag Composite Membrane Fabricated by Surfactant Induced Electroless Plating (SIEP) for Hydrogen Separation,” Sep. Sci. Technol., 54, 2084 (2019); https://doi.org/10.1080/01496395.2019.1576734.
  • A. DELPARISH and A. K. AVCI, “Modeling of Intensified Glycerol Steam Reforming in a Heat-Exchange Integrated Microchannel Reactor,” Catal. Today, 299, 328 (2018); https://doi.org/10.1016/j.cattod.2017.03.029.
  • M. S. BAȘAR, B. S. ÇAĞLAYAN, and A. E. AKSOYLU, “A Study on Catalytic Hydrogen Production: Thermodynamic and Experimental Analysis of Serial OSR-PROX System,” Fuel Process. Technol., 178, 301 (2018); https://doi.org/10.1016/j.fuproc.2018.06.002.
  • S. JAMSHIDI et al., “Performance of Pd Composite Membrane Prepared by Organic-Inorganic Method in WGS Membrane Reactor,” Sep. Sci. Technol., 51, 1891 (2016); https://doi.org/10.1080/01496395.2016.1186188.
  • L. WEI et al., “Facile Surface Modification of Porous Stainless Steel Substrate with TiO2 Intermediate Layer for Fabrication of H2-Permeable Composite Palladium Membranes,” Sep. Sci. Technol., 51, 998 (2016); https://doi.org/10.1080/01496395.2015.1136330.
  • C. H. KIM et al., “Methane Steam Reforming Using a Membrane Reactor Equipped with a Pd-Based Composite Membrane for Effective Hydrogen Production,” Int. J. Hydrogen Energy, 43, 5863 (2018); https://doi.org/10.1016/j.ijhydene.2017.10.054.
  • Q. ZHUANG et al., “An Integrated Natural Gas Power Cycle Using Hydrogen and Carbon Fuel Cells,” Fuel, 209, 76 (2017); https://doi.org/10.1016/j.fuel.2017.07.080.
  • S. PATI et al., “Pd-Ag-Cu Dense Metallic Membrane for Hydrogen Isotope Purification and Recovery at Low Pressures,” J. Membr. Sci., 522, 151 (2017); https://doi.org/10.1016/j.memsci.2016.09.025.
  • M. R. RAHIMPOUR, A. K. MOSTAFAZADEH, and M. M. BARMAKI, “Application of Hydrogen-Permselective Pd-Based Membrane in an Industrial Single-Type Methanol Reactor in the Presence of Catalyst Deactivation,” Fuel Process. Technol, 89, 1396 (2008); https://doi.org/10.1016/j.fuproc.2008.06.013.
  • M. KHANIPOUR et al., “Enhancement of Synthesis Gas and Methanol Production by Flare Gas Recovery Utilizing a Membrane Based Separation Process,” Fuel Process. Technol, 166, 186 (2017); https://doi.org/10.1016/j.fuproc.2017.06.008.
  • G. A. MORGAN, B. J. HODGE, and A. S. POORE, “Performance Testing of a Prototype Pd-Ag Diffuser,” Fusion Sci. Technol., 72, 426 (2017); https://doi.org/10.1080/15361055.2017.1333858.
  • G. A. MORGAN, “Effect of Impurities on the Performance of a Pd-Ag Diffuser,” Fusion Sci. Technol., 60, 1367 (2011); https://doi.org/10.13182/FST11-A12684.
  • P. CAMP et al., “ITER-Like Tokamak Exhaust Gases in Active Gas Handling System: Process Optioneering,” Fusion Sci. Technol., 71, 457 (2017); https://doi.org/10.1080/15361055.2017.1288457.
  • K. HOU and R. HUGHES, “The Effect of External Mass Transfer, Competitive Adsorption and Coking on Hydrogen Permeation Through Thin Pd/Ag Membranes,” J. Membr. Sci., 206, 119 (2002); https://doi.org/10.1016/S0376-7388(01)00770-0.
  • H. KUROKAWA et al., “Inhibition Effect of CO on Hydrogen Permeability of Pd-Ag Membrane Applied in a Microchannel Module Configuration,” Int. J. Hydrogen Energy, 39, 17201 (2014); https://doi.org/10.1016/j.ijhydene.2014.08.056.
  • P. PÉREZ et al., “Surface Effects and CO/CO2 Influence in the H2 Permeation Through a Pd-Ag Membrane: A Comprehensive Model,” Int. J. Hydrogen Energy, 40, 6566 (2015); https://doi.org/10.1016/j.ijhydene.2015.03.106.
  • C. V. MIGUEL et al., “Effect of CO and CO2 on H2 Permeation Through Finger-Like Pd-Ag Membranes,” Int. J. Hydrogen Energy, 37, 12680 (2012); https://doi.org/10.1016/j.ijhydene.2012.05.131.
  • A. L. MEJDELL et al., “Effects of CO and CO2 on Hydrogen Permeation Through a ~3 μm Pd/Ag 23 wt.% Membrane Employed in a Microchannel Membrane Configuration,” Sep. Purif. Technol., 68, 178 (2009); https://doi.org/10.1016/j.seppur.2009.04.025.
  • S. T. B. LUNDIN et al., “The Role (or Lack Thereof) of Nitrogen or Ammonia Adsorption-Induced Hydrogen Flux Inhibition on Palladium Membrane Performance,” J. Membr. Sci., 514, 65 (2016); https://doi.org/10.1016/j.memsci.2016.04.048.
  • N. H. CHEN and D. F. OTHMER, “New Generalized Equation for Gas Diffusion Coefficient,” J. Chem. Eng. Data, 7, 37 (1962); https://doi.org/10.1021/je60012a011.
  • B. D. MORREALE et al., “The Permeability of Hydrogen in Bulk Palladium at Elevated Temperatures and Pressures,” J. Membr. Sci., 212, 87 (2003); https://doi.org/10.1016/S0376-7388(02)00456-8.
  • P. P. MARDILOVICH et al., “Defect-Free Palladium Membranes on Porous Stainless-Steel Support,” AIChE J., 44, 310 (1998); https://doi.org/10.1002/aic.690440209.
  • Y. SAKAMOTO et al., “Permeability and Diffusivity and Hydrogen in Palladium-Rich Pd-Y(Gd)-Ag Ternary Alloys,” J. Alloys Compd., 185, 191 (1992); https://doi.org/10.1016/0925-8388(92)90468-O.
  • H. LU et al., “Pd and Pd-Ni Alloy Composite Membranes Fabricated by Electroless Plating Method on Capillary α-Al2O3 Substrates,” Int. J. Hydrogen Energy, 20, 3548 (2015); https://doi.org/10.1016/j.ijhydene.2014.09.121.
  • L. WANG, R. YOSHIIE, and S. UEMIYA, “Fabrication of Novel Pd-Ag-Ru/Al2O3 Ternary Alloy Composite Membrane with Remarkably Enhanced H2 Permeability,” J. Membr. Sci., 306, 1 (2007); https://doi.org/10.1016/j.memsci.2007.08.057.
  • S. UEMIYA, T. MATSUDA, and E. KIKUCHI, “Hydrogen Permeable Palladium-Silver Alloy Membrane Supported on Porous Ceramics,” J. Membr. Sci., 56, 315 (1991); https://doi.org/10.1016/S0376-7388(00)83041-0.
  • N. A. AL-MUFACHI, N. V. REES, and R. STEINBERGER-WILKENS, “Hydrogen Selective Membranes: A Review of Palladium-Based Dense Metal Membranes,” Renew. Sustain. Energy Rev., 47, 540 (2015); https://doi.org/10.1016/j.rser.2015.03.026.
  • A. CARAVELLA, G. BARBIERI, and E. DRIOLI, “Concentration Polarization Analysis in Self-Supported Pd-Based Membranes,” Sep. Purif. Technol., 66, 613 (2009); https://doi.org/10.1016/j.seppur.2009.01.008.
  • J. ZHANG et al., “Experimental and Simulation Studies on Concentration Polarization in H2 Enrichment by Highly Permeable and Selective Pd Membranes,” J. Membr. Sci., 274, 83 (2006); https://doi.org/10.1016/j.memsci.2005.07.047.
  • T. MORI et al., “Kinetics, Isotopes Effects, and Mechanism of the Hydrogenation of Carbon Monoxide on a Supported Palladium Catalyst,” J. Phys. Chem., 87, 3648 (1983); https://doi.org/10.1021/j100242a016.
  • T. L. WIND et al., “Comparison of Mechanistic Understanding and Experiments for CO Methanation over Nickel,” J. Catal., 342, 105 (2016); https://doi.org/10.1016/j.jcat.2016.07.014.
  • G. BARBIERI et al., “A Novel Model Equation for the Permeation of Hydrogen in Mixture with Carbon Monoxide Through Pd-Ag Membranes,” Sep. Purif. Technol., 61, 217 (2008); https://doi.org/10.1016/j.seppur.2007.10.010.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.