References
- T. HIRAI, K. EZATO, and P. MAJERUS, “ITER Relevant High Heat Flux Testing on Plasma Facing Surfaces,” Mater. Trans., 46, 3, 412 (2005); https://doi.org/https://doi.org/10.2320/matertrans.46.412.
- R. RAU, J. MOTEFF, and R. LADD, “Comparison of Microstructure with Mechanical Properties of Irradiated Tungsten,” J. Nucl. Mater., 24, 2, 164 (1967); https://doi.org/https://doi.org/10.1016/0022-3115(67)90005-0.
- J. STEICHEN, “Tensile Properties of Neutron Irradiated TZM and Tungsten,” J. Nucl. Mater., 60, 1, 13 (1976); https://doi.org/https://doi.org/10.1016/0022-3115(76)90112-4.
- I. GORYNIN et al., “Effects of Neutron Irradiation on Properties of Refractory Metals,” J. Nucl. Mater., 191, 421 (1992); https://doi.org/https://doi.org/10.1016/0022-3115(92)90799-Q.
- V. BARABASH et al., “Neutron Irradiation Effects on Plasma Facing Materials,” J. Nucl. Mater., 283, 138 (2000); https://doi.org/https://doi.org/10.1016/S0022-3115(00)00203-8.
- T. LOEWENHOFF et al., “Tungsten and CFC Degradation Under Combined High Cycle Transient and Steady State Heat Loads,” Fusion Eng. Des., 87, 7–8, 1201 (2012); https://doi.org/https://doi.org/10.1016/j.fusengdes.2012.02.106.
- G. PINTSUK et al., “Qualification and Post-Mortem Characterization of Tungsten Mock-Ups Exposed to Cyclic High Heat Flux Loading,” Fusion Eng. Des., 88, 9, 1858 (2013); https://doi.org/https://doi.org/10.1016/j.fusengdes.2013.05.091.
- C. LIU and K. TOBITA, “Numerical Simulation Analysis for the Divertor Plate of DEMO Reactor,” Plasma Fusion Res. Ser., 9, 197 (2010).
- C. YIN et al., “Tensile Properties of Baseline and Advanced Tungsten Grades for Fusion Applications,” Int. J. Refract. Met. Hard Mater., 75, 153 (2018); https://doi.org/https://doi.org/10.1016/j.ijrmhm.2018.04.003.
- C. YIN et al., “Ductile to Brittle Transition Temperature of Advanced Tungsten Alloys for Nuclear Fusion Applications Deduced by Miniaturized Three-Point Bending Tests,” Int. J. Refract. Met. Hard Mater., 95, 105464 (2021); https://doi.org/https://doi.org/10.1016/j.ijrmhm.2020.105464.
- A. S. SABAU et al., “Facility for High-Heat Flux Testing of Irradiated Fusion Materials and Components Using Infrared Plasma Arc Lamps,” Phys. Scr., 2014, T159, 14007 (2014); https://doi.org/https://doi.org/10.1088/0031-8949/2014/T159/014007.
- A. S. SABAU et al., “High-Heat-Flux Testing of Irradiated Tungsten-Based Materials for Fusion Applications Using Infrared Plasma Arc Lamps,” Fusion Sci. Technol., 66, 3, 394 (2014); https://doi.org/https://doi.org/10.13182/FST14-809.
- D. M. CAMM et al., “High Intensity Radiation Apparatus Having Vortex Restriction Means,” Google Patents (1987).
- H. S. GROVER et al., “Modeling of a Vortex Water-Wall Argon Arc Lamp for Rapid Thermal Annealing Applications,” IEEE Trans. Ind. Appl., 51, 6, 4817 (2015); https://doi.org/https://doi.org/10.1109/TIA.2015.2451099.
- Y. CRESSAULT et al., “Determination of Radiative Properties for Water-Wall Plasma Arc Lamp Modeling,” IEEE Trans. Ind. Appl., 52, 4, 3492 (2016); https://doi.org/https://doi.org/10.1109/TIA.2016.2544928.
- H. S. GROVER et al., “Application of a Plasma Arc Lamp for Thermal Processing of Semiconductor Wafers,” IEEE Trans. Ind. Appl., 51, 6, 4808 (2015); https://doi.org/https://doi.org/10.1109/TIA.2015.2451085.
- M. RIETH and A. HOFFMANN, “Influence of Microstructure and Notch Fabrication on Impact Bending Properties of Tungsten Materials,” Int. J. Refract. Met. Hard Mater., 28, 6, 679 (2010); https://doi.org/https://doi.org/10.1016/j.ijrmhm.2010.04.010.
- K. TOKUNAGA et al., “Tungsten Coatings on Reduced-Activation Ferritic/Martensitic Steel by Plasma Spray Technique – Thermal Behavior of Tungsten Coatings,” Trans. JWRI, 39, 2, 331 (2010).
- S. SUZUKI et al., “Present Research Status on Divertor and Plasma Facing Components for Fusion Power Plants,” Fusion Sci. Technol., 44, 1, 41 (2003); https://doi.org/https://doi.org/10.13182/FST03-A308.
- A. RAFFRAY et al., “Critical Heat Flux Analysis and R&D for the Design of the ITER Divertor,” Fusion Eng. Des., 45, 4, 377 (1999); https://doi.org/https://doi.org/10.1016/S0920-3796(99)00053-8.
- M. SATO et al., “Concept of Core and Divertor Plasma for Fusion DEMO Plant at JAERI,” Fusion Eng. Des., 81, 8–14, 1277 (2006); https://doi.org/https://doi.org/10.1016/j.fusengdes.2005.09.074.
- S. JITSUKAWA et al., “Development of an Extensive Database of Mechanical and Physical Properties for Reduced-Activation Martensitic Steel F82H,” J. Nucl. Mater., 307, 179 (2002); https://doi.org/https://doi.org/10.1016/S0022-3115(02)01075-9.
- K. TOKUNAGA et al., “High Heat Loading Properties of Vacuum Plasma Spray Tungsten Coatings on Reduced Activation Ferritic/Martensitic Steel,” J. Nucl. Mater., 438, S905–S908 (2013); https://doi.org/https://doi.org/10.1016/j.jnucmat.2013.01.196.
- S. ZINKLE, J. ROBERTSON, and R. KLUEH, “Thermophysical and Mechanical Properties of Fe-(8-9)% Cr Reduced Activation Steels,” DOE/ER-0313/24, Oak Ridge National Laboratory (1998).
- A.-A. TAVASSOLI et al., “Materials Design Data for Reduced Activation Martensitic Steel Type F82H,” Fusion Eng. Des., 61, 617 (2002); https://doi.org/https://doi.org/10.1016/S0920-3796(02)00255-7.
- K. SHIBA and T. HIROSE, “Deformation Behavior of Reduced Activation Ferritic Steel During Tensile Test,” Fusion Eng. Des., 81, 8–14, 1051 (2006); https://doi.org/https://doi.org/10.1016/j.fusengdes.2005.07.030.
- K. SHIBA, M. ENOEDA, and S. JITSUKAWA, “Reduced Activation Martensitic Steels as a Structural Material for ITER Test Blanket,” J. Nucl. Mater., 329, 243 (2004); https://doi.org/https://doi.org/10.1016/j.jnucmat.2004.04.018.
- M. ZHANG et al., “Precision Measurement and Evaluation of Flatness Error for the Aero-Engine Rotor Connection Surface Based on Convex Hull Theory and an Improved PSO Algorithm,” Meas. Sci. Technol., 31, 8, 85006 (2020); https://doi.org/https://doi.org/10.1088/1361-6501/ab8170.
- D. M. CAMM, “Lamp Having Segmented Reflector,” Google Patents (1987).
- T. THRUM et al., “Development of a Powerful Vortex Stabilized Waterwall Flash Lamp for RTP Applications,” Proc. 2004 IEEE Industry Applications Conf. and 39th IAS Annual Mtg., Vol. 2, p. 1019, IEEE (2004).
- A. S. SABAU et al., “A Radiative Transport Model for Heating Paints Using High Density Plasma Arc Lamps,” J. Appl. Phys., 105, 8, 84901 (2009); https://doi.org/https://doi.org/10.1063/1.3097356.
- A. S. SABAU et al., “A 6 MW/m2 High Heat Flux Testing Facility of Irradiated Materials Using Infrared Plasma-Arc Lamps,” Fusion Sci. Technol., 75, 7, 690 (2019); https://doi.org/https://doi.org/10.1080/15361055.2019.1623571.
- Y. XIAN et al., “Experimental Characterization Methods for Thermal Contact Resistance: A Review,” Appl.Therm. Eng., 130, 1530 (2018); https://doi.org/https://doi.org/10.1016/j.applthermaleng.2017.10.163.
- V. SINGHAL et al., “An Experimentally Validated Thermo-Mechanical Model for the Prediction of Thermal Contact Conductance,” Int. J. Heat Mass Transfer, 48, 25–26, 5446 (2005); https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2005.06.028.