Microstructural Characterization and Mechanical Properties of Metastable Beta and α+β Titanium Alloy Electron Beam Weldments

References

• H. INOUE, “Welding and Joining of Titanium and Titanium Alloys,” Weld. Int., 10, 2, 160 (1996); https://doi.org/10.1080/09507119609548973.
   Google Scholar
• T. PASANG et al., “Welding of Titanium Alloys,” MATEC Web Conf., 123, 1 (2017); https://doi.org/10.1051/matecconf/201712300001.
   Google Scholar
• H. W. ROSENBERG, “Ti-15-3 : A New Cold-Formable Sheet Titanium Alloy,” JOM, 35, 11, 30 (1983); https://doi.org/10.1007/BF03339165.
   Web of Science ®Google Scholar
• R. SANTHOSH et al., “Effect of Duplex Aging on Microstructure and Mechanical Behavior of Beta Titanium Alloy Ti–15V–3Cr–3Al–3Sn Under Unidirectional and Cyclic Loading Conditions,” Int. J. Fatigue, 73, 88 (2015); https://doi.org/10.1016/j.ijfatigue.2014.12.005.
   Web of Science ®Google Scholar
• M. ÇAM, G. DOS SANTOS, and J. F. KOÇAK, “Laser and Electron Beam Welding of Ti-Alloys,” GKSS 97/E/35, GKSS-Forschungszentrum Geesthacht GmbH (1997).
   Google Scholar
• A. ILTAF et al., “Influence of Electron Beam Oscillation Patterns on the Microstructure, Texture, Residual Stress and Mechanical Properties of Ti-5Al-2.5Sn Alloy Weldments,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. (2020); https://doi.org/10.1177/0954405420937537.
   Google Scholar
• T. S. BALASUBRAMANIAN et al., “Influence of Welding Processes on Microstructure, Tensile and Impact Properties of Ti-6Al-4V Alloy Joints,” Trans. Nonferrous Met. Soc. China, 21, 6, 1253 (2011); https://doi.org/10.1016/S1003-6326(11)60850-9.
   Web of Science ®Google Scholar
• Q. YUNLIAN et al., “Electron Beam Welding, Laser Beam Welding and Gas Tungsten Arc Welding of Titanium Sheet,” Mater. Sci. Eng. A., 280, 1, 177 (2000); https://doi.org/10.1016/S0921-5093(99)00662-0.
   Web of Science ®Google Scholar
• T. PASANG et al., “Metallurgy and Deformation of Electron Beam Welded Similar Titanium Alloys,” AIP Conf. Proc., 1431, 982 (2012); https://doi.org/10.1063/1.4707659.
   Google Scholar
• C. J. TSAI and L. M. WANG, “Improved Mechanical Properties of Ti-6Al-4V Alloy by Electron Beam Welding Process Plus Annealing Treatments and Its Microstructural Evolution,” Mater. Des., 60, 587 (2014); https://doi.org/10.1016/j.matdes.2014.04.037.
   Web of Science ®Google Scholar
• N. K. BABU et al., “Influence of Beam Oscillation Patterns on the Structure and Mechanical Properties of Ti-6Al-4V Electron Beam Weldments,” Sci. Technol. Weld. Join., 10, 5, 583 (2005); https://doi.org/10.1179/174329305X57473.
   Web of Science ®Google Scholar
• J. KAR, S. K. ROY, and G. G. ROY, “Influence of Beam Oscillation in Electron Beam Welding of Ti-6AL-4V,” Int. J. Adv. Manuf. Technol., 94, 9, 4531 (2018); https://doi.org/10.1007/s00170-017-1169-1.
   Web of Science ®Google Scholar
• G. THOMAS et al., “Effect of Pre- and Post-Weld Heat Treatments on the Mechanical Properties of Electron Beam Welded Ti-6Al-4V Alloy,” J. Mater. Sci., 28, 18, 4892 (1993); https://doi.org/10.1007/BF00361152.
   Web of Science ®Google Scholar
• N. SARESH, M. G. PILLAI, and J. MATHEW, “Investigations into the Effects of Electron Beam Welding on Thick Ti-6Al-4V Titanium Alloy,” J. Mater. Process. Technol., 192, 83 (2007); https://doi.org/10.1016/j.jmatprotec.2007.04.048.
   Web of Science ®Google Scholar
• S. THAKARE et al., “Effect of Electron Beam Welding on Microstructure and Mechanical Properties of Ti-6Al-4V Alloy,” Proc. 23rd Int. Federation of Heat Treatment and Surface Engineering Congress, Savannah, Georgia, April 18–21, 2016, p. 190, ASM International (2016).
   Google Scholar
• T. S. BALASUBRAMANIAN et al., “Effect of Welding Processes on Joint Characteristics of Ti-6Al-4V Alloy,” Sci. Technol. Weld. Join., 16, 8, 702 (2011); https://doi.org/10.1179/1362171811Y.0000000062.
   Web of Science ®Google Scholar
• S. WANG and X. WU, “Investigation on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Joints with Electron Beam Welding,” Mater. Des., 36, 663 (2012); https://doi.org/10.1016/j.matdes.2011.11.068.
   Web of Science ®Google Scholar
• S. DEWANGAN, S. K. MOHAPATRA, and A. SHARMA, “An Assessment into Mechanical Properties and Microstructural Behavior of TIG Welded Ti-6Al-4V Titanium Alloy, ” GSTA, 10, 3, 281 (2020); https://doi.org/10.1108/GS-11-2019-0052.
   Google Scholar
• A. SATTAR et al., “Optimization of TIG Welding Parameters for Ti-6Al-4V Titanium Alloy Using the Taguchi Design of Experiment,” NJES, 15, 2, 22 (2022); https://doi.org/10.24949/njes.v15i2.731.
   Google Scholar
• A. ABDOLLAHI, A. S. AHNAF HUDA, and A. S. KABIR, “Microstructural Characterization and Mechanical Properties of Fiber Laser Welded CP-Ti and Ti-6Al-4V Similar and Dissimilar Joints,” Metals, 10, 6, 747 (2020); https://doi.org/10.3390/met10060747.
   Web of Science ®Google Scholar
• C. J. MARVEL et al., “Improving the Mechanical Properties of the Fusion Zone in Electron-Beam Welded Ti-5Al-5Mo-5V-3Cr Alloys,” Metall. Mater. Trans. A, 48, 4, 1921 (2017); https://doi.org/10.1007/s11661-017-3968-2.
   Google Scholar
• A. L. ANIS et al., “Grain Refinement of Ti-15V-3Cr-3Sn-3Al Metastable β Titanium Alloy Welds Using Boron-Modified Fillers,” J. Alloys Compd., 749, 320 (2018); https://doi.org/10.1016/j.jallcom.2018.03.286.
   Web of Science ®Google Scholar
• R. MITCHELL et al., “Characteristics of Electron Beam Welded Ti & Ti Alloys,” Adv. Mat. Res., 275, 81 (2011); https://doi.org/10.4028/www.scientific.net/AMR.275.81.
   Google Scholar
• A. CHAMANFAR et al., “Microstructure and Mechanical Properties of Laser Welded Ti–10V–2Fe–3Al (Ti1023) Titanium Alloy,” J. Mater. Res. Technol., 9, 4, 7721 (2020); https://doi.org/10.1016/j.jmrt.2020.04.028.
   Google Scholar
• T. BUTT et al., “Microstructure and Mechanical Properties of Conduction Regime,” Metals, 7, 269 (2017); https://doi.org/10.3390/met7070269.
   Google Scholar
• H. C. LIN and L. M. WANG, “Improved Mechanical Properties of Ti–15V–3Cr–3Sn–3Al Alloy by Electron Beam Welding Process Plus Heat Treatments and Its Microstructure Evolution,” Mater. Chem. Phys., 126, 3, 891 (2011); https://doi.org/10.1016/j.matchemphys.2010.12.019.
   Web of Science ®Google Scholar
• T. PASANG et al., “Comparison of Ti-5Al-5V-5Mo-3Cr Welds Performed by Laser Beam, Electron Beam and Gas Tungsten Arc Welding,” Procedia Eng., 63, 397 (2013); https://doi.org/10.1016/j.proeng.2013.08.202.
   Google Scholar
• J. C. SABOL et al., “Journal of Materials Processing Technology Localized Tensile Strain Distribution and Metallurgy of Electron Beam Welded Ti–5Al–5V–5Mo–3Cr Titanium Alloys,” J. Mater. Process. Tech., 212, 11, 2380 (2012); https://doi.org/10.1016/j.jmatprotec.2012.06.023.
   Web of Science ®Google Scholar
• K. V. KRISHNA et al., “Effect of Welding Speed on Microstructural and Mechanical Properties of EB Ti-15V-3Al-3Cr-3Sn Welds,” Mater. Sci. Technol., 1 (2023); https://doi.org/10.1080/02670836.2023.2171765.
   Google Scholar
• A. S. H. KABIR et al., “Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V,” Metall. Mater. Trans. A, 43, 11, 4171 (2012); https://doi.org/10.1007/s11661-012-1230-5.
   Google Scholar
• K. BALACHANDAR, V. S. SARMA, and B. PANT, “Microstructure and Mechanical Properties of Gas-Tungsten-Arc–Welded Ti-15-3 Beta Titanium Alloy,” Metall. Mater. Trans. A, 40, 2685 (2009); https://doi.org/10.1007/s11661-009-9952-8.
   Google Scholar
• D. W. BECKER and W. A. BAESLACK, “Property-Microstructure Relationships in Metastable-Beta Titanium Alloy Weldments,” Weld. J., 59, 3, 85 (1980).
   Web of Science ®Google Scholar
• T. FURUHARA, T. MAKI, and T. MAKINO, “Microstructure Control by Thermomechanical Processing in β-Ti–15–3 Alloy,” J. Mater. Process Technol., 117, 3, 318 (2001); https://doi.org/10.1016/S0924-0136(01)00790-7.
   Web of Science ®Google Scholar
• T. KURODA, F. MATSUDA, and I. IWAGI, “Effects of Two‐Step Ageing and Thermomechanical Treatments on Age‐Hardening Properties of Welded β Titanium Alloy Effects of Two-Step Ageing and Thermomechanical Treatments on Age-Hardening Properties of Welded β Titanium Alloy,” Weld. Int., 8, 1, 9 (2016); https://doi.org/10.1080/09507119409548536.
   Google Scholar
• R. SANTHOSH et al., “Studies on Single and Duplex Aging of Metastable Beta Titanium Alloy Ti-15V-3Cr-3Al-3Sn,” J. Alloys Compd., 605, 222 (2014); https://doi.org/10.1016/j.jallcom.2014.03.183.
   Web of Science ®Google Scholar
• S. MISHRA and T. DEBROY, “Measurements and Monte Carlo Simulation of Grain Growth in the Heat-Affected Zone of Ti-6Al-4V Welds,” Acta Mater., 52, 5, 1183 (2004); https://doi.org/10.1016/j.actamat.2003.11.003.
   Web of Science ®Google Scholar
• R. REDA et al., “Effect of Welding Processes and Postweld Heat Treatment on the Mechanical Properties of Ti-6Al-4V Castings,” Int. J. Mater. Eng. Technol., 13, 1, 1 (2015); https://doi.org/10.17654/ijmetjan2015_001_021.
   Google Scholar
• R. SANTHOSH, M. GEETHA, and M. NAGESWARA RAO, “Recent Developments in Heat Treatment of Beta Titanium Alloys for Aerospace Applications,” Trans. Indian Inst. Met., 70, 7, 1681 (2017); https://doi.org/10.1007/s12666-016-0985-6.
   Web of Science ®Google Scholar
• R. P. KOLLI and A. DEVARAJ, “A Review of Metastable Beta Titanium Alloys,” Metals, 8, 7, 506 (2018); https://doi.org/10.3390/met8070506.
   Web of Science ®Google Scholar
• J. LONG et al., “Effects of Post-Weld Heat Treatment on Microstructures and Properties of Laser Welded Joints of New High-Strength Ti-55531 Alloy,” J. Manuf. Process., 64, 1329 (2021); https://doi.org/10.1016/j.jmapro.2021.02.042.
   Web of Science ®Google Scholar
• N. K. BABU and S. G. S. RAMAN, “Influence of Current Pulsing on Microstructure and Mechanical Properties of Ti-6Al-4V TIG Weldments,” Sci. Technol. Weld. Join., 11, 4, 442 (2006); https://doi.org/10.1179/174329306X120750.
   Web of Science ®Google Scholar
• L. LI et al., “Microstructure and Mechanical Properties of Electron Beam Welded TC4/TA7 Dissimilar Titanium Alloy Joint,” J. Manuf. Process., 50, 295 (2020); https://doi.org/10.1016/j.jmapro.2019.11.007.
   Web of Science ®Google Scholar
• S. H. WANG and M. D. WEI, “Tensile Properties of Gas Tungsten Arc Weldments in Commercially Pure Titanium, Ti-6Al-4V and Ti-15V-3Al-3Sn-3Cr Alloys at Different Strain Rates,” Sci. Technol. Weld. Join., 9, 5, 415 (2004); https://doi.org/10.1179/136217104225021599.
   Web of Science ®Google Scholar
• N. K. BABU et al., “Effect of Beam Oscillation on Fatigue Life of Ti-6Al-4V Electron Beam Weldments,” Mater. Sci. Eng. A, 471, 1, 113 (2007); https://doi.org/10.1016/j.msea.2007.03.040.
   Web of Science ®Google Scholar