Synthesis of multi-walled carbon nanotube/silica nanoparticle/polystyrene microsphere/polyaniline based hybrids for EMI shielding application

References

• Fedorovskaya, E. O., Okotrub, A. V., and Bulusheva, L. G. (2012) Supercapacitor performance of aligned carbon nanotube/polyaniline composite depending on the duration of aniline polycondensation. Fuller. Nanotub. Carbon Nanostruct., 20(4–7): 519–522.
   Web of Science ®Google Scholar
• Calamba, K., Ringor, C., Pascua, C., and Miyazawa, K. I. (2015) Pleated surface morphology of C60 fullerene nanowhiskers incorporated by Polyaniline in N-Methyl-2-Pyrrolidone. Fuller. Nanotub. Carbon Nanostruct., 23(8): 709–714.
   Web of Science ®Google Scholar
• Saini, P. (2015) Conjugated Polymer-Based blends, copolymers, and composites: Synthesis, properties, and applications. In Fundamentals of Conjugated Polymer Blends, Copolymers and Composites: Synthesis, Properties and Applications; Saini, P. (ed.), John Wiley & Sons, Inc.: Hoboken, NJ, USA, doi: 10.1002/9781119137160.ch1.
   Google Scholar
• Cheng, M., Yang, X., Zhao, J., Chen, C., Tan, Q., Zhang, F., and Sun, L. (2013) Efficient organic dye-sensitized solar cells: Molecular engineering of donor-acceptor-acceptor cationic dyes. Chem. Sus. Chem., 6(12): 2322–2329.
   PubMed Web of Science ®Google Scholar
• Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., and Grätzel, M. (2014) Dye-Sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers. Nat. Chem., 6(3): 242–247.
   PubMed Web of Science ®Google Scholar
• Saini, P., and Arora, M. (2013) Formation mechanism, electronic properties & microwave shielding by nano-structured polyanilines prepared by template free route using surfactant dopants. J. Mater. Chem. A., 1(31): 8926–8934.
   Web of Science ®Google Scholar
• Karami, H., Mousavi, M. F., and Shamsipur, M. (2003) A new design for dry polyaniline rechargeable batteries. J. Power Sour., 117(1): 255–259.
   Web of Science ®Google Scholar
• Otero, T. F., and Cantero, I. (1999) Conducting polymers as positive electrodes in rechargeable lithium-ion batteries. J. Power Sour., 81–82: 838–841.
   Web of Science ®Google Scholar
• Hudak, N. S. (2014) Chloroaluminate-Doped conducting polymers as positive electrodes in rechargeable aluminum batteries. J. Phys. Chem. C., 118(10): 5203–5215.
   Web of Science ®Google Scholar
• Ahmed, E., Subramaniyan, S., Kim, F. S., Xin, H., and Jenekhe, S. A. (2011) Benzobisthiazole- based donor–acceptor copolymer semiconductors for photovoltaic cells and highly stable field-effect transistors. Macromolecules, 44(18): 7207–7219.
   Web of Science ®Google Scholar
• Chiang, J.-C., and MacDiarmid, A. G. (1986) “Polyaniline”: Protonic acid doping of the emeraldine form to the metallic regime. Synth. Met., 13(1): 193–205.
   Web of Science ®Google Scholar
• Tsao, H. N., Cho, D., Andreasen, J. W., Rouhanipour, A., Breiby, D. W., Pisula, W. and Müllen, K. (2009) The influence of morphology on high-performance polymer field-effect transistors. Adv. Mater., 21(2): 209–212.
   Web of Science ®Google Scholar
• Mukherjee, R., Sharma, R., Saini, P., and De, S. (2015) Nanostructured polyaniline incorporated ultrafiltration membrane for desalination of brackish water. Environ. Sci.: Water Res. Technol., 1(6): 893–904.
   Google Scholar
• Saini, P., and Choudhary, V. (2013) Conducting polymer coated textile based multilayered shields for suppression of microwave radiations in 8.2–12.4 GHz range. J. Appl. Polym. Sci., 129(5): 2832–2839.
   Web of Science ®Google Scholar
• Saini, P., and Choudhary, V. (2013) Electrostatic charge dissipation and electromagnetic interference shielding response of polyaniline based conducting fabrics. Indian J. Pure Appl. Phys., 51(2): 112–117.
   Web of Science ®Google Scholar
• Saini, P., Choudhary, V., and Dhawan, S. (2012) Improved microwave absorption and electrostatic charge dissipation efficiencies of conducting polymer grafted fabrics prepared via in situ polymerization. Polym. Adv. Technol., 23(3): 343–349.
   Web of Science ®Google Scholar
• Saini, P. (2013) Electrical properties and electromagnetic interference shielding response of electrically conducting thermosetting nanocomposites. In Thermoset Nanocomposites; Mittal, V. (ed.), Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, pp. 211–237.
   Google Scholar
• Kraft, A., Grimsdale, A. C., and Holmes, A. B. (1998) Electroluminescent conjugated polymers-seeing polymers in a new light. Angew. Chem. Int. Ed., 37: 402–428.
   PubMed Web of Science ®Google Scholar
• Chang, Y. L., and Lu, Z. H. (2013) White organic light-emitting diodes for solid-state lighting. Display Technol. J., 9(6): 459–468.
   Web of Science ®Google Scholar
• Saini, P., and Choudhary, V. (2013) Structural details, electrical properties, and electromagnetic interference shielding response of processable copolymers of aniline. J. Mater. Sci., 48(2): 797–804.
   Web of Science ®Google Scholar
• Ji, H., Yang, J., Wu, Z., Hu, J., Song, H., Li, L., and Chen, G. (2013) A simple approach to fabricate sticky superhydrophobic polystyrene surfaces. J. Adhes. Sci. Technol., 27(21): 2296–2303.
   Web of Science ®Google Scholar
• Liang, X., Chen, B., and Fu, J. (2012) Study on O-terphenyl/polystyrene blends: How plasticizer affects the glass transition of polystyrene?. J. Macromol. Sci. Part B., 51(4): 698–706.
   Web of Science ®Google Scholar
• Mihaly, M., Lacatusu, I., Olteanu, N. L., and Meghea, A. (2014) A systematic methodology to design silica templates: Silica microemulsion formulation and nanodroplet type and size estimation. Compt. Rend. Chim., 17(4): 342–351.
   Web of Science ®Google Scholar
• Jin, Y., Li, A., Hazelton, S. G., Liang, S., John, C. L., Selid, P. D., and Zhao, J. X. (2009) Amorphous silica nanohybrids: Synthesis, properties and applications. Coordinat. Chem. Rev., 253(23): 2998–3014.
   Web of Science ®Google Scholar
• Singh, L. P., Bhattacharyya, S. K., Kumar, R., Mishra, G., Sharma, U., Singh, G., and Ahalawat, S. (2014) Sol-Gel processing of silica nanoparticles and their applications. Adv. Colloid. Interfac. Sci., 214: 17–37.
   PubMed Web of Science ®Google Scholar
• Ajayan, P. M., Stephan, O., Colliex, C., and Trauth, D. (1994) Aligned carbon nanotube arrays formed by cutting a polymer resin nanotube composite. Science, 265: 1212–1214.
   PubMed Web of Science ®Google Scholar
• Zeng, X., Yu, S., Sun, R., and Xu, J. B. (2015) Mechanical reinforcement while remaining electrical insulation of glass fibre/polymer composites using core–shell CNT@SiO2 hybrids as fillers. Compos. Part A: Appl. Sci. Manufact., 73: 260–268.
   Web of Science ®Google Scholar
• Li, N., Huang, Y., Du, F., He, X., Lin, X., Gao, H., Ma, Y., Li, F., Chen, Y., and Eklund, P.C. (2006) Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites. Nano Lett., 6(6): 1141–1145.
   PubMed Web of Science ®Google Scholar
• Saini, P., Choudhary, V., Singh, B. P., Mathur, R. B., and Dhawan, S. K. (2009) Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding. Mater. Chem. Phys., 113(2): 919–926.
   Web of Science ®Google Scholar
• Saini, P., Choudhary, V., Singh, B. P., Mathur, R. B., and Dhawan, S. K. (2011) Enhanced microwave absorption behavior of polyaniline-CNT/polystyrene blend in 12.4–18.0 GHz range. Synth. Met., 161(15): 1522–1526.
   Web of Science ®Google Scholar
• Saini, P., and Choudhary, V. (2013) Enhanced electromagnetic interference shielding effectiveness of polyaniline functionalized carbon nanotubes filled polystyrene composites. J. Nanopart. Res., 15(1): 1–7.
   Web of Science ®Google Scholar
• Datsyuk, V., Kalyva, M., Papagelis, K., Parthenios, J., Tasis, D., Siokou, A., and Galiotis, C. (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon., 46(6): 833–840.
   Web of Science ®Google Scholar
• Ming, W., Jones, F. N., and Fu, S. (1998) High solids-content nanosize polymer latexes made by microemulsion polymerization. Macromol. Chem. Phys., 199(6): 1075–1079.
   Web of Science ®Google Scholar
• Zu, L., Li, R., Jin, L., Lian, H., Liu, Y., and Cui, X. (2014) Preparation and characterization of polypropylene/silica composite particle with interpenetrating network via hot emulsion sol–gel approach. Prog. Natur. Sci: Mater. Int., 24(1): 42–49.
   Web of Science ®Google Scholar
• Liu, P., and Su, Z. (2005) Thermal stabilities of polystyrene/silica hybrid nanocomposites via microwave-assisted in situ polymerization. Mater. Chem. Phys., 94(2): 412–416.
   Web of Science ®Google Scholar
• Musić, S., Filipović-Vinceković, N., and Sekovanić, L. (2011) Precipitation of amorphous SiO2 particles and their properties. Brazil. J. Chem. Eng., 28(1): 89–94.
   Web of Science ®Google Scholar
• Chen, Y. J., Dung, N. D., Li, Y. A., Yip, M. C., Hsu, W. K., and Tai, N. H. (2011) Investigation of the electric conductivity and the electromagnetic interference shielding efficiency of SWCNTs/GNS/PAni nanocomposites. Diamond. Relat. Mater., 20(8): 1183–1187.
   Web of Science ®Google Scholar
• Soomro, R. A., Sherazi, S. H., Memon, N., Shah, M. R., Kalwar, N. H., Hallam, K. R., and Shah, A. (2014) Synthesis of air stable copper nanoparticles and their use in catalysis. Adv. Mater. Lett., 5(4): 191–198.
   Google Scholar
• Ramimoghadam, D., Hussein, M. Z. B., and Taufiq-Yap, Y. H. (2012) The effect of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on the properties of ZnO synthesized by hydrothermal method. Int. J. Mol. Sci., 13(10): 13275–13293.
   PubMed Web of Science ®Google Scholar
• González, M., Soares, B. G., Magioli, M., Marins, J. A., and Rieumont, J. (2012) Facile method for synthesis of polyaniline/silica hybrid composites by simultaneous sol-gel process and “in situ” polymerization of aniline. J. Sol-gel. Sci. Technol., 63(3): 373–381.
   Web of Science ®Google Scholar
• Yan, J., Wang, C., Gao, Y., Zheng, Z., Zhong, S., Miao, X., and Wang, H. (2011) Anchoring conductive polyaniline on the surface of expandable polystyrene beads by swelling-based and in situ polymerization of aniline method. Chem. Eng. J., 172(1): 564–571.
   Web of Science ®Google Scholar
• Kiani, K., Hill, D. J., Rasoul, F., Whittaker, M., and Rintoul, L. (2007) Raft mediated surface grafting of t-butyl acrylate onto an ethylene–propylene copolymer initiated by gamma radiation. J. Polym. Sci. Part A: Polym. Chem., 45(6): 1074–1083.
   Web of Science ®Google Scholar
• Ansari, M. O., Ansari, S. P., Yadav, S. K., Anwer, T., Cho, M. H., and Mohammad, F. (2014) Ammonia vapor sensing and electrical properties of fibrous multi-walled carbon nanotube/polyaniline nanocomposites prepared in presence of cetyl-trimethylammonium bromide. J. Indust. Eng. Chem., 20(4): 2010–2017.
   Web of Science ®Google Scholar
• Seino, M., Yokomachi, K., Hayakawa, T., Kikuchi, R., Kakimoto, M. A., and Horiuchi, S. (2006) Preparation of poly (N-isopropylacrylamide) grafted silica bead using hyperbranched polysiloxysilane as polymer brush and application to temperature-responsive HPLC. Polymer, 47(6): 1946–1952.
   Web of Science ®Google Scholar
• Martins, C. R., Ruggeri, G., and De Paoli, M. A. (2003) Synthesis in pilot plant scale and physical properties of sulfonated polystyrene. J. Braz. Chem.Soc., 14(5): 797–802.
   Web of Science ®Google Scholar
• Kumar, A. M., and Gasem, Z. M. (2015) Effect of functionalization of carbon nanotubes on mechanical and electrochemical behavior of polyaniline nanocomposite coatings. Surf. Coat. Technol., 276: 416–423.
   Web of Science ®Google Scholar
• Ding, P., and Qu, B. (2006) Synthesis and characterization of polystyrene/layered double-hydroxide nanocomposites via in situ emulsion and suspension polymerization. J. Appl. Polym. Sci., 101(6): 3758–3766.
   Web of Science ®Google Scholar
• Zhang, W. H., Fan, X. D., Tian, W., and Fan, W. W. (2012) Polystyrene/nano-SiO2 composite microspheres fabricated by Pickering emulsion polymerization: Preparation, mechanisms and thermal properties. Express. Polym. Lett., 6(7): 532–542.
   Web of Science ®Google Scholar
• Pakizeh, M., Omidkhah, M. R., and Zarringhalam, A. (2007) Synthesis and characterization of new silica membranes using template–sol–gel technology. Int. J. Hyd. Energ., 32(12): 1825–1836.
   Web of Science ®Google Scholar
• Saleh, T. A. (2013) The role of carbon nanotubes in enhancement of photocatalysis. Synth. App. Carbon Nanotub. Compos., 479–493.
   Google Scholar
• Wu, W., Li, Y., Yang, L., Ma, Y., and Yan, X. (2014) Preparation and characterization of coaxial multiwalled carbon nanotubes/polyaniline tubular nanocomposites for electrochemical energy storage in the presence of sodium alginate. Synth. Met., 193: 48–57.
   Web of Science ®Google Scholar
• Tripathi, A., and Vedavathy, T.S. (1994) Electromagnetic shielding using superconductors. Appl. Superconduct., 2: 1–5.
   Web of Science ®Google Scholar
• Saini, P. (2015) Intrinsically conducting polymer-based blends and composites for electromagnetic interference shielding: Theoretical and experimental aspects. In Fundamentals of Conjugated Polymer Blends, Copolymers and Composites: Synthesis, Properties and Applications; Saini, P. (ed.), John Wiley & Sons, Inc.: Hoboken, NJ, USA.
   Google Scholar
• He, Q., Yuan, T., Yan, X., Ding, D., Wang, Q., Luo, Z., Shen, T.D., Wei, S., Cao, D., and Guo, Z. (2014) Flame-Retardant polypropylene/multiwall carbon nanotube nanocomposites: Effects of surface functionalization and surfactant molecular weight. Macromol. Chem. Phys., 215(4): 327–340.
   Web of Science ®Google Scholar
• Trivedi, D. C., and Dhawan, S. K. (1993) Shielding of electromagnetic interference using polyaniline. Synth. Met., 59(2): 267–272.
   Web of Science ®Google Scholar
• Saini, P., and Choudhary, V. (2013) Enhanced electromagnetic interference shielding effectiveness of polyaniline functionalized carbon nanotubes filled polystyrene composites. J. Nanopart. Res., 15(1): 1–7.
   Web of Science ®Google Scholar