References
- Li, K. Self-Assembly of Graphene on Carbon Nanotube Surfaces. Sci. Rep. 2013, 3, 2353. DOI: 10.1038/srep02353.
- P. J.; Britto, K. S. V. S. A.; Rubio, J. A.; Alonso, P. M. Ajayan, Improved Charge Transfer at Carbon Nanotube Electrodes. Adv. Mater. 1999, 11, 154–157. DOI: 10.1002/(SICI)1521-4095(199902)11:2<154::AID-ADMA154>3.0.CO;2-B.
- Mittal, V. Polymer Layered Silicate Nanocomposites: A Review. Materials 2009, 2, 992–1057. DOI: 10.3390/ma2030992.
- Pagacz, J.; Pielichowski, K. PVC/MMT Nanocomposites. J. Therm. Anal. Calorim. 2013, 111, 1571–1575. DOI: 10.1007/s10973-012-2484-2.
- M.; Hassanzadeh-Aghdam, M. M. J.; Jamali, R. Ansari, Ansari a New Micromechanical Method for the Analysis of Thermal Conductivities of Unidirectional Fiber/CNT-Reinforced Polymer Hybrid nanocomposites107137. Compos. Part B: Eng. 2019, 175, 107137. DOI: 10.1016/j.compositesb.2019.107137.
- H. M.; Zidan, E. M. A A. M.; Abdelghany, A. E. Tarabiah, Characterization and Some Physical Studies of PVA/PVP Filled with MWCNTs. J. Mater. Res. Technol. 2019, 8, 904–913. DOI: 10.1016/j.jmrt.2018.04.023.
- Ma, P. C. Dispersion and Functionalization of Carbon Nanotubes for Polymer-Based Nanocomposites: A Review. Compos. Part A. 2010, 41, 1345–1367.
- Shofner, M. L.; Khabashesku, V. N.; Barrera, E. V. Processing and Mechanical Properties of Fluorinated Single-Wall Carbon Nanotube Polyethylene Composites. Chem. Mater. 2006, 18, 906–913. DOI: 10.1021/cm051475y.
- Gao, J. Continuous Spinning of a Single-Walled Carbon Nanotube Nylon Composite Fiber. J. Am. Chem. Soc. 2005, 127, 3847–3854. DOI: 10.1021/ja0446193.
- Perveen, R. 5 - Multiwalled Carbon Nanotube-Based Nanocomposites for Artificial Bone Grafting. In Applications of Nanocomposite Materials in Orthopedics, Woodhead Publishing. pp. 111–126.
- S.; Davtyan, A. B. K.; Shik, A.; Tonoyan, S. Rogovina, Polymer Nanocomposites with a Uniform Distribution of Nanoparticles in a Polymer Matrix Synthesized by the Frontal Polymerization Technique. Nanotechnol. Russ. 2009, 4, 489–498. DOI: 10.1134/S1995078009070106.
- N. G.; Sahoo, S. R. J. W.; Cho, L.; Li, S. H. Chan, Polymer Nanocomposites Based on Functionalized Carbon Nanotubes. Prog. Polym. Sci. 2010, 35, 837–867. DOI: 10.1016/j.progpolymsci.2010.03.002.
- Van Trinh, P. Influence of Defects Induced by Chemical Treatment on the Electrical and Thermal Conductivity of Nanofluids Containing Carboxyl-Functionalized Multi-Walled Carbon Nanotubes. RSC Adv. 2017, 7, 49937–49946. DOI: 10.1039/C7RA08552D.
- Yoo, H. J. Effects of Carbon Nanotube Functionalization and Annealing on Crystallization and Mechanical Properties of Melt-Spun Carbon Nanotubes/Poly(Ethylene Terephthalate) Fibers. Compos. Sci. Technol. 2012, 72, 1834–1840. DOI: 10.1016/j.compscitech.2012.07.022.
- Su, Q. Designing a Castor Oil-Based Polyurethane as Bioadhesive. Colloids Surf. B. 181, 740–748. DOI: 10.1016/j.colsurfb.2019.06.032.
- Ogunniyi, D. S. Castor Oil: A Vital Industrial Raw Material. Bioresour. Technol. 2006, 97, 1086–1091. DOI: 10.1016/j.biortech.2005.03.028.
- Nezihe, A. Microwave Heating Application to Produce Dehydrated Castor Oil. Ind. Eng. Chem. Res. 2010, 50, 398–403. DOI: 10.1021/ie1013037.
- Gonzalez-Dominguez, J. M. Covalent Functionalization of MWCNTs with Poly(p-Phenylene Sulphide) Oligomers: A Route to the Efficient Integration through a Chemical Approach. J. Mater. Chem. 2012, 22, 21285–21297.
- Zhang, T. New Practical Method of Homogeneous Dispersion of Multi-Walled Carbon Nanotubes (MWCNTs) into Mg Matrix Composites. IOP Conf. Ser.: Mater. Sci. Eng. 2017, 182, 012028. DOI: 10.1088/1757-899X/182/1/012028.
- Rosca, I. D. Oxidation of Multiwalled Carbon Nanotubes by Nitric Acid. Carbon 2005, 43, 3124–3131. DOI: 10.1016/j.carbon.2005.06.019.
- Le, V. T. Surface Modification and Functionalization of Carbon Nanotube with Some Organic Compounds. Adv. Nat. Sci: Nanosci. Nanotechnol. 2013, 4, 035017. DOI: 10.1088/2043-6262/4/3/035017.
- El-Dosky, H.; Ghoneim, M.; El-Badawy, F. Carbon Nanotubes Modified Electrode for Enhanced Voltammetric Sensing of Mebeverine Hydrochloride in Formulations and Human Serum Samples. J. Electrochem. Soc. 2017, 164, B212–B222. DOI: 10.1149/2.0941706jes.
- Moazzen, M.; Khaneghah, A. M.; Shariatifar, N.; Ahmadloo, M.; Eş, I.; Baghani, A. N.; Yousefinejad, S.; Alimohammadi, M.; Azari, A.; Dobaradaran, S.; et al. Multi-Walled Carbon Nanotubes Modified with Iron Oxide and Silver Nanoparticles (MWCNT-Fe3O4/Ag) as a Novel Adsorbent for Determining PAEs in Carbonated Soft Drinks Using Magnetic SPE-GC/MS Method. Arabian J. Chem. 2019, 12, 476–488.
- D. S.; Ahmeda, A. J. H. M. R. Mohammad, c, Comparison of Functionalization of Multiwalled Carbon Nanotubes Treated by Oil Olive and Nitric Acid and Their Characterization. Energy Procedia 2013, 36, 1111–1118. DOI: 10.1016/j.egypro.2013.07.126.
- Nor Aziah Buang, F. F.; Majid, Z. A.; Shahir, S. Characteristic of mild acid functionalized multiwalled carbon nanotubes towards high dispersion with low structural defects. Dig. J. Nanomater. Biostuct. 2012, 7, 33–39.
- Faraj, A.; Abuilaiwi, T. L.; Mamdouh, A.-H.; and M. A. Atieh, Modification and Functionalization of Multiwalled Carbon Nanotube (MWCNT) via FISCHER Esterification. Arab. J. Sci. Eng. 2010, 35, 37–48.
- Karak, N. Bio-Based Hyperbranched Polyurethane Nanocomposites. In Encyclopedia of Polymer Science and Technology. Wiley: 2015; pp. 1–35. DOI: 10.1002/0471440264.pst638.
- Mogha, A. Hybrid Polyurethane Nanocomposites Reinforced with Clay and Multiwalled Carbon Nanotubes: Synthesis and Characterization. Mater. Today: Proc. 2020, 28, 1455–1459.