References
- W.J. Cantwell, Comparison of low and high velocity impact response of CFRP, Composites, vol. 20, pp. 545–551, 1989.
- S. Abrate, Impact on laminated composite materials, Appl. Mech. Rev., vol. 44, pp. 155–190, 1991.
- S. Abrate, Impact on laminated composites: Recent advances, Appl. Mech. Rev., vol. 47, pp. 517–544, 1994.
- S. Abrate, Impact on Composite Structures, Cambridge University Press, Cambridge, UK, p. 37, 1998.
- B.A. Cheesman and T.A. Bogetti, Ballistic impact in to fabric and complaint composite laminate, Compos. Struct., vol. 61, pp. 161–173, 2003.
- Z. Wang, Y. Li, J.G. Wang, Z. Wang, and X. Wang, Static and dynamic behaviors of high alkali glass-fiber-reinforced cloth composites, Mech. Adv. Mater. Struct., vol. 15, pp. 400–408, 2008.
- L. Ben-Dor, A. Dubinsky, and T. Elperin, Ballistic impact: Recent advances in analytical modeling of plate penetration dynamics—A review, Appl. Mech. Rev., vol. 58, pp. 355–371, 2005.
- S. Abrate, Modeling of impact on composite structures, Compos. Struct., vol. 51, pp. 129–138, 2001.
- H.M. Wen, T.Y. Reddy, SR. Reid, and P.D. Soden, Indentation penetration and perforation of composite laminates and sandwich panels under quasi-static and projectile loading, Key Eng. Mater., vol. 501, pp. 141–143, 1998.
- T.Y. Reddy, H.M. Wen, S.R. Reid, and P.D. Soden, Penetration and perforation of composite sandwich panels by hemispherical and conical projectiles, Trans ASME, Pres. Ves. Technol. J., vol. 120, pp. 186–194, 1998.
- H.M. Wen, Predicting the penetration and perforation of FRP laminates struck normally by a projectile with different nose shapes, Compos. Struct., vol. 49, pp. 321–329, 2000.
- H.M. Wen, Penetration and perforation of thick FRP laminates, Compos. Sci. Technol., vol. 61, pp. 1163–1172, 2001.
- H.M. Wen, Predicting the penetration and perforation of targets struck by projectiles at normal incidence, Int. J. Mech. Struct. Mach., vol. 30, pp. 543–577, 2002.
- T. He, H.M. Wen, and Y. Qin, Penetration and perforation of FRP laminates struck transversely by conical-nosed projectiles, Compos. Struct., vol. 81, pp. 243–252, 2007.
- S.S. Morye, P.J. Hine, R.A. Duckett, D.J. Carr, and I.M. Ward, Modeling of the energy absorption by polymer composites upon ballistic impact, Compos. Sci. Technol., vol. 60, pp. 2631–2642, 2000.
- J. Walker, Ballistic limit of fabrics with resin, 19th International Symposium of Ballistics, pp. 1409–1414, May 7–11, Interlaken, Switzerland, 2001.
- S.W.R. Lee and C.T. Sun, Dynamic penetration of graphit/epoxy laminates impacted by blunt-ended projectile, Compos. Sci. Technol., vol. 49, pp. 369–380, 1993.
- J.P. Lambert. A residual predictive model for long rod penetrators, ARBRL-MR-02828, Ballistic Research Laboratory, Aberdeen Proving Ground, MD, 1978.
- A.R. Sabet, M.H. Behshty, and H. Rahimi, High velocity impact behavior of GRP panels containing coarse sized sand filler, Polym. Compos., vol. 29, pp. 932–938, 2007.
- A.R. Sabet, M.H. Behshty, and H. Rahimi, Experimental study of sharp–tipped projectile perforation of GFRP plates containing sand filler under high velocity impact and quasi-static loadings, Polym. Compos., vol. 30, pp. 1497–1509, 2009.
- A.R. Sabet, M.H. Behshty, and H. Rahimi, Quasi-static perforation study using a sharp-tip conical indenter on GRP plates containing sand filler. Polym. Polym. Compos., vol. 17, pp. 21–30, 2009.
- P.M. Cunniff, An analysis of the system effects in woven fabric under ballistic impact, Text. Res. J., vol. 62, pp. 495–509, 1992.
- B.C. Ray, Loading rate sensitivity of glass fiber–epoxy composite at ambient and sub-ambient temperatures, J. Reinf. Plast. Compos., vol. 25, pp. 329–333, 2006.
- A. Tabiei and I. Ivanov, Micro-mechanical model with strain-rate dependency and damage for impact simulation of woven fabric composites, Mech. Adv. Mater. Struct., vol. 14, pp. 365–377, 2007.