237
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Application of the Cosserat continua to numerical studies on the properties of the materials

&
Pages 797-808 | Received 19 Nov 2015, Accepted 19 Apr 2016, Published online: 22 Nov 2016

References

  • R. Toupin, Elastic materials with couple-stresses, Arch. Rational Mech. Anal., vol. 11, pp. 385–414, 1962.
  • R.D. Mindlin, Influence of couple-stress on stress concentrations, Exp. Mech., vol. 3, pp. 1–7, 1963.
  • R.D. Mindlin, Microstructure in linear elasticity, Arch. Rational Mech. Anal., vol. 16, pp. 51–78, 1964.
  • E. Sternberg and R. Muki, The effect of couple-stresses on the stress concentration around a crack, Int. J. Solids Struct., vol. 3, pp. 69–95, 1967.
  • A.E. Green, B.C. McInnis, and P.M. Naghdi, Elastic-plastic continua with simple force dipole, Int. J. Eng. Sci., vol. 6, pp. 373–394, 1968.
  • A. Troncone, Numerical analysis of a landslide in soils with strain-softening behavior, Geotechnique, vol. 55, no. 8, pp. 585–596, 2005.
  • G.N. Pande and S. Pietruszczak, Symmetric tangent stiffness formulation for non-associated plasticity, Comput. Geotech., vol. 2, no. 2, pp. 89–99, 1986.
  • X.K. Li, J.B. Zhang, and H.W. Zhang, Instability of wave propagation in saturated poroelastoplastic media, Int. J. Numer. Anal. Methods Geomech., vol. 26, no. 6, pp. 563–578, 2002.
  • H.B. Muhlhaus and I. Vardoulakis, The thickness of shear bands in granular materials, Geotechnique, vol. 37, no. 3, pp. 271–283, 1987.
  • H.B. Muhlhaus, Application of Cosserat theory in numerical solutions of limit load problems, Ing. Arch., vol. 59, no. 2, pp. 124–137, 1989.
  • R. de Borst and L.J. Sluys, Localization in a Cosserat continuum under static and dynamic loading conditions, Comput. Methods Appl. Mech. Eng., vol. 90, no. 1, pp. 805–827, 1991.
  • R. de Borst, Simulation of strain localization: A reappraisal of the Cosserat continuum, Eng. Comput., vol. 8, no. 4, pp. 317–332, 1991.
  • R. de Borst, A generalization of J2-flow theory for polar continua, Comput. Methods Appl. Mech. Eng., vol 103, no. 3, pp. 347–362, 1993.
  • J. Tejchman and W. Wu, Numerical study on patterning of shear bands in a Cosserat continuum, Acta Mech., vol. 99, no. 1–4, pp. 61–74, 1993.
  • J. Tejchman and E. Bauer, Numerical simulation of shear band formation with a polar hypoplastic constitutive model, Comput. Geotech., vol. 19, no. 3, pp. 221–244, 1996.
  • P. Steinmann, A micropolar theory of finite deformation and finite rotation multiplicative elastoplasticity, Int. J. Solids Struct., vol. 31, no. 8, pp. 1063–1084, 1994.
  • P. Steinmann, Theory and numerics of ductile micropolar elastoplastic damage, Int. J. Numer. Methods Eng., vol. 38, pp. 583–606, 1995.
  • M.M. Iordache and K. William, Localized failure analysis in elastoplastic Cosserat continua, Comput. Methods Appl. Mech. Eng., vol. 151, no. 3, pp. 559–586, 1998.
  • M.T. Manzari, Application of micropolar plasticity to post failure analysis in geomechanics, Int. J. Numer. Anal. Methods Geomech., vol. 28, no. 10, pp. 1011–1032, 2004.
  • X.K. Li and H.X. Tang, A consistent return mapping algorithm for pressure-dependent elastoplastic Cosserat continua and modeling of strain localization, Comput. Struct., vol. 83, no. 1, pp. 1–10, 2005.
  • A.R. Khoei, S.A. Gharehbaghi, and A.R. Tabarraie, Error estimation, adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization, Appl. Math. Model., vol. 31, no. 6, pp. 983–1000, 2007.
  • W. Ehlers and W. Volk, On theoretical and numerical methods in the theory of porous media based on polar and non-polar elasto-plastic solid materials, Int. J. Solids Struct., vol. 35, no. 34, pp. 4597–4617, 1998.
  • M.B. Rubin, Numerical solution of axisymmetric nonlinear elastic problems including shells using the theory of a Cosserat point, Comput. Mech., vol. 36, no. 4, pp. 266–288, 2005.
  • D. Liu, D.Q. Cao, and R. Rosing, Finite element formulation of slender structures with shear deformation based on the Cosserat theory, Int. J. Solids Struct., vol. 44, no. 24, pp. 7785–7802, 2007.
  • A. Riahi and J.H. Curran, Full 3D finite element Cosserat formulation with application in layered structures, Appl. Math. Model., vol. 33, no. 8, pp. 3450–3464, 2009.
  • A. Riahi, J.H. Curran, and H. Bidhendi, Buckling analysis of 3D layered structures using a Cosserat continuum approach, Comput. Geotech., vol. 36, no. 7, pp. 1101–1112, 2009.
  • A.R. Khoei, S. Yadegari, and S.O.R. Biabanaki, 3D finite element modeling of shear band localization via the micro-polar Cosserat continuum theory, Comput. Mater. Sci., vol. 49, no. 4, pp. 720–733, 2010.
  • J.S. Stolken and A.G. Evans, A micro-bend test method for measuring the plasticity length scale, Acta Mater., vol. 46, no. 14, pp. 5109–5115, 1998.
  • N.A. Fleck, G.M. Muller, and M.F. Ashby, Strain gradient plasticity: Theory and experiment, Acta Metall. Mater., vol. 42, no. 2, pp. 475–487, 1994.
  • R.D. Gauthier and W.E. Jahsman, A quest for micropolar elastic constants. J. Appl. Mech., vol. 42, no. 2, pp. 369–374, 1975.
  • A.C. Eringen, Microcontinuum Field Theories I: Foundations and Solids, Springer, New York, 1999.
  • T. Belytschko, W. Wing, and M. Brian, Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, London, 2000.
  • S.P. Timoshenko and J.N. Goodier, Theory of Elasticity, McGraw-Hill, New York, 1970.
  • X.K. Li, P.G. Duxbury, and P. Lyons, Considerations for the application and numerical implementation of strain hardening with the Hoffman yield criterion. Comput. Struct., vol. 52, no. 4, pp. 633–644, 1994.
  • P.G. Duxbury and X.K. Li, Development of elasto-plastic material models in a natural co-ordinate system, Comput. Methods Appl. Mech. Eng., vol. 135, no. 4, pp. 283–306, 1996.
  • H.X. Tang, Z.L. Hu, and X.K. Li, Three dimensional pressure-dependent elastoplastic Cosserat continuum model and finite element simulation of strain localization, Int. J. Appl. Mech., vol. 5, no. 3, pp. 1–33, 2013.
  • H.X. Tang and X.K. Li, Numerical analysis for the effects of constitutive parameters in Cosserat continuum model on the simulation results of the strain localization, Chin. J. Comput. Mech., vol. 25, pp. 676–681, 2008.
  • A.I. Mana and G.W. Clough, Prediction of movements for braced cuts in clay, J. Geotech. Eng. Div., vol. 107, no. 6, pp. 759–778, 1981.
  • N.A. Fleck and J.W. Hutchinson, Strain gradient plasticity, Adv. App. Mech., vol. 33, pp. 295–361, 1997.
  • H. Gao, Y. Huang, W.D. Nix, and J.W. Hutchinson, Mechanism-based strain gradient plasticity—I: Theory, J. Mech. Phys. Solids., vol. 47, pp. 1239–1263, 1999.
  • Y. Huang, H. Gao, W.D. Nix, and J.W. Hutchinson, Mechanism-based strain gradient plasticity—II: Analysis, J. Mech. Phys. Solids., vol. 48, pp. 99–128, 2000.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.