A size-dependent model for instability analysis of paddle-type and double-sided NEMS measurement sensors in the presence of centrifugal force

References

• H.M. Sedighi and K.H. Shirazi, Vibrations of micro-beams actuated by an electric field via parameter expansion method, Acta Astronaut., vol. 85, pp. 19–24, 2013.
   Web of Science ®Google Scholar
• H.M. Sedighi, Size-dependent dynamic pull-in instability of vibrating electrically actuated microbeams based on the strain gradient elasticity theory, Acta Astronaut., vol. 95, pp. 111–123, 2014.
   Web of Science ®Google Scholar
• J. Mokhtari, A. Farrokhabadi, R. Rach, and M. Abadyan, Theoretical modeling of the effect of Casimir attraction on the electrostatic instability of nanowire-fabricated actuators, Physica E, vol. 68, pp. 149–158, 2015.
   Google Scholar
• H.M. Sedighi, The influence of small scale on the pull-in behavior of nonlocal nanobridges considering surface effect, Casimir and Van der Waals attractions, Int. J. Appl. Mech., vol. 6, no. 3, article ID 1450030, 2014.
   Web of Science ®Google Scholar
• H.M. Sedighi, Modeling of surface stress effects on the dynamic behavior of actuated non-classical nano-bridges, Trans. Can. Soc. Mech. Eng., vol. 39, no. 2, p. 137, 2015.
   Web of Science ®Google Scholar
• Y. Tadi Beni, F. Mehralian, and H. Zeighampour, The modified couple stress functionally graded cylindrical thin shell formulation, Mech. Adv. Mater. Struct., vol. 23, no. 7, pp. 791–801, 2016.
   Web of Science ®Google Scholar
• H.M. Sedighi, M. Chan-Gizian, and A. Noghreha-Badi, Dynamic pull-in instability of geometrically nonlinear actuated micro-beams based on the modified couple stress theory, Lat. Am. J. Solids Struct., vol. 11, no. 5, pp. 810–825, 2014.
   Web of Science ®Google Scholar
• A. Farrokhabadi, J. Mokhtari, A. Koochi, and M. Abadyan, A theoretical model for investigating the effect of vacuum fluctuations on the electromechanical stability of nanotweezers. Ind. J. Phys., vol. 89, no. 6, pp. 599–609, 2015.
   Web of Science ®Google Scholar
• M.M. Zand, The dynamic pull-in instability and snap-through behavior of initially curved microbeams, Mech. Adv. Mater. Struct., vol. 19, no. 6, pp. 485–491 2012.
   Web of Science ®Google Scholar
• H.M. Ouakad, The response of a micro-electro-mechanical system (MEMS) cantilever-paddle gas sensor to mechanical shock loads, J. Vib. Control, vol. 21, no. 14, pp. 2739–2754, 2015. DOI: 10.1177/1077546313514763.
   Web of Science ®Google Scholar
• D. Yan, A. Khajepour, and R. Mansour, Design and modeling of a MEMS bidirectional vertical thermal actuator, J. Micromech. Microeng., vol. 14, no. 7, p. 841, 2004.
   Web of Science ®Google Scholar
• X.C. Zhang, E.B. Myers, J.E. Sader, and M.L. Roukes, Nanomechanical torsional resonators for frequency-shift infrared thermal sensing, Nano Lett., vol. 13, no. 4, pp. 1528–1534, 2013.
   PubMed Web of Science ®Google Scholar
• C.J. Tong, Y.C. Cheng, M.T. Lin, K.J. Chung, J.S. Hsu, and C.L. Wu, Optical micro-paddle beam deflection measurement for electrostatic mechanical testing of nano-scale thin film application to MEMS, Microsyst. Technol., vol. 16, no. 7, pp. 1131–1137, 2010.
   Web of Science ®Google Scholar
• Y. Qian, L. Lou, M.J. Tsai, and C. Lee, A dual-silicon-nanowires based U-shape nanoelectromechanical switch with low pull-in voltage, Appl. Phys. Lett., vol. 100, no. 11, article ID 113102, 2012.
   Web of Science ®Google Scholar
• F. Ahmad, J.O. Dennis, N.H. Hamid, M.H.M. Khir, and A.Y. Ahmed, Design and modeling of MEMS resonator for magnetic field sensing using hybrid actuation technique. In: IEEE Asia Pacific Conference on Circuits and Systems (APCCAS), pp. 827–830, Malaysia, 2010.
   Google Scholar
• E. Koukharenko, S.P. Beeby, M.J. Tudor, N.M. White, T. O'Donnell, C. Saha, S. Kulkarni, and S. Roy, Microelectromechanical systems vibration powered electromagnetic generator for wireless sensor applications, Microsyst. Technol., vol. 12, no. 10–11, pp. 1071–1077, 2006.
   Web of Science ®Google Scholar
• S.P. Beeby, M.J. Tudor, E. Koukharenko, N.M. White, T. O'Donnell, C. Saha, S. Kulkarni, and S. Roy, Design, fabrication and simulations of microelectromagnetic vibration powered generator for low power MEMS, Proc. DTIP, vol. 5, pp. 374–379, 2005.
   Google Scholar
• T. Sahai, R.B. Bhiladvala, and A.T. Zehnder, Thermomechanical transitions in doubly-clamped micro-oscillators, Int. J. Non Linear Mech., vol. 42, no. 4, pp. 596–607, 2007.
   Web of Science ®Google Scholar
• H.M. Sedighi and K.H. Shirazi, Dynamic pull-in instability of double-sided actuated nano-torsional switches, Acta Mech. Solida Sin., vol. 28, no. 1, pp. 91–101, 2015.
   Web of Science ®Google Scholar
• Y. Fu, J. Zhang, and L. Wan, Application of the energy balance method to a nonlinear oscillator arising in the microelectromechanical system (MEMS), Curr. Appl. Phys., vol. 11, no. 3, pp. 482–485, 2011.
   Web of Science ®Google Scholar
• C. Ke, Resonant pull-in of a double-sided driven nanotube-based electromechanical resonator, J. Appl. Phys., vol. 105, no. 2, article ID 024301, 2009.
   Web of Science ®Google Scholar
• Y. Khan and M. Akbarzade, Dynamic analysis of nonlinear oscillator equation arising in double-sided driven clamped microbeam-based electromechanical resonator, J. Phys. Sci., vol. 67, no. 8, pp. 435–440, 2012.
   Web of Science ®Google Scholar
• H.M. Sedighi, K.H. Shirazi, and M. Changizian, The effect of amplitude of vibration on the pull-in instability of double-sided actuated micro-switch resonators, J. Appl. Mech. Tech. Phys., vol. 56, no. 2, pp. 304–312, 2015.
   Web of Science ®Google Scholar
• P.M. Dashtaki and Y. Tadi Beni, Effects of Casimir force and thermal stresses on the buckling of electrostatic nanobridges based on couple stress theory, Arabian J. Sci. Eng., vol. 39, pp. 5753–5763, 2014.
   Web of Science ®Google Scholar
• M. Bodson, J. Chiasson, and R.T. Novotnak, Nonlinear speed observer for high-performance induction motor control, IEEE Trans. Ind. Electron., vol. 42, no. 4, pp. 337–343, 1995.
   Web of Science ®Google Scholar
• L. Renaudin, F. Bonnardot, O. Musy, J.B. Doray, and D. Rémond, Natural roller bearing fault detection by angular measurement of true instantaneous angular speed, Mech. Syst. Sig. Process., vol. 24, no. 7, pp. 1998–2011, 2010.
   Web of Science ®Google Scholar
• M.S. Lebold, K. Maynard, K. Reichard, M. Trethewey, D. Bieryla, C. Lissenden, and D. Dobbins, Using torsional vibration analysis as a synergistic method for crack detection in rotating equipment. Proceedings of the IEEE Aerospace Conference, Vol. 6, pp. 3517–3527, California, 2004.
   Google Scholar
• W.Y. Jywe and C.J. Chen, The development of a high-speed spindle measurement system using a laser diode and a quadrants sensor, Int. J. Mach. Tools Manuf., vol. 45, no. 10, pp. 1162–1170, 2005.
   Web of Science ®Google Scholar
• C.T. Huang, P.N. Li, C.Y. Pai, T.S. Leu, and C.P. Jen, Design and simulation of a microfluidic blood-plasma separation chip using microchannel structures, Sep. Sci. Technol., vol. 45, no. 1, pp. 42–49, 2009.
   Web of Science ®Google Scholar
• C. Hou, Y. Wu, X. Zeng, S. Zhao, Q. Zhou, and G. Yang, Novel high sensitivity accelerometer based on a microfiber loop resonator, Opt. Eng., vol. 49, no. 1, article ID 014402, 2010.
   Web of Science ®Google Scholar
• H. Azimloo, G. Rezazadeh, R. Shabani, and M. Sheikhlou, Bifurcation analysis of an electro-statically actuated micro-beam in the presence of centrifugal forces, Int. J. Non Linear Mech., vol. 67, pp. 7–15, 2014.
   Web of Science ®Google Scholar
• A. Shah-Mohammadi-Azar, H. Azimloo, G. Rezazadeh, R. Shabani, and B. Tousi, On the modeling of a capacitive angular speed measurement sensor, Measurement, vol. 46, no. 10, pp. 3976–3981, 2013.
   Web of Science ®Google Scholar
• M. Keivani, R. Gheisari, A. Kanani, et al., Effect of the centrifugal force on the electromechanical instability of U-shaped and double-sided sensors made of cylindrical nanowires, J. Braz. Soc. Mech. Sci. Eng., vol. 38, no. 7, pp. 2129–2148, 2016.
   Web of Science ®Google Scholar
• J. Abdi, A. Koochi, A.S. Kazemi, and M. Abadyan, Modeling the effects of size dependence and dispersion forces on the pull-in instability of electrostatic cantilever NEMS using modified couple stress theory, Smart Mater. Struct., vol. 20, no. 5, article ID 055011, 2011.
   Web of Science ®Google Scholar
• G.W. Wang, Y. Zhang, Y.P. Zhao, and G.T. Yang, Pull-in instability study of carbon nanotube tweezers under the influence of van der Waals forces, J. Micromech. Microeng., vol. 14, no. 8, p. 1119, 2004.
   Web of Science ®Google Scholar
• W.M. Van Spengen, R. Puers, and I. De Wolf, A physical model to predict stiction in MEMS, J. Micromech. Microeng., vol. 12, no. 5, p. 702, 2002.
   Web of Science ®Google Scholar
• A. Farrokhabadi, J. Mokhtari, R. Rach, and M. Abadyan, Modeling the influence of the Casimir force on the pull-in instability of nanowire-fabricated nanotweezers, Int. J. Mod. Phys. B, vol. 29, no. 2, article ID 1450245, 2014.
   Web of Science ®Google Scholar
• D.C.C. Lam, F. Yang, A.C.M. Chong, J. Wang, and P. Tong, Experiments and theory in strain gradient elasticity, J. Mech. Phys. Solids, vol. 51, no. 8, pp. 1477–1508, 2003.
   Web of Science ®Google Scholar
• A.W. McFarland and J.S. Colton, Role of material microstructure in plate stiffness with relevance to microcantilever sensors, J. Micromech. Microeng., vol. 15, no. 5, p. 1060, 2005.
   Web of Science ®Google Scholar
• A.R. Hadjesfandiari and G.F. Dargush, Couple stress theory for solids, Int. J. Solids Struct., vol. 48, pp. 2496–2510, 2011.
   Web of Science ®Google Scholar
• M.M.S. Fakhrabadi and J. Yang, Comprehensive nonlinear electromechanical analysis of nanobeams under DC/AC voltages based on consistent couple-stress theory, Compos. Struct., vol. 132, pp. 1206–1218, 2015.
   Web of Science ®Google Scholar
• A. Koochi, A.S. Kazemi, Y. Tadi Beni, A. Yekrangi, and M. Abadyan, Theoretical study of the effect of Casimir attraction on the pull-in behavior of beam-type NEMS using modified Adomian method, Physica E, vol. 43, no. 2, pp. 625–632, 2010.
   Google Scholar
• R.K. Gupta, Electrostatic pull-in test structure design for in situ mechanical property measurements of microelectromechanical systems, Ph.D. Dissertation, Massachusetts Institute of Technology (MIT), Cambridge, MA, 1997.
   Google Scholar
• J.N. Israelachvili, Intermolecular and Surface Forces, Revised Third Edition, Academic Press, Cambridge, MA, 2011.
   Google Scholar
• A. Gusso and G. J. Delben, Dispersion force for materials relevant for micro- and nanodevices fabrication, Physics D, vol. 41, no. 17, article ID 175405, 2008.
   Google Scholar
• J.S. Duan, Convenient analytic recurrence algorithms for the Adomian polynomials, Appl. Math. Comput., vol. 217, no. 13, pp. 6337–6348, 2011.
   Web of Science ®Google Scholar
• G. Adomian, Nonlinear Stochastic Operator Equations, Academic Press, Orlando, FL, 1986.
   Google Scholar
• J.S. Duan, An efficient algorithm for the multivariable Adomian polynomials, Appl. Math. Comput., vol. 217, no. 6, pp. 2456–2467, 2010.
   Web of Science ®Google Scholar
• C. Shu, Differential Quadrature and Its Application in Engineering, Springer, New York, NY, 2000.
   Google Scholar
• Y.C. Hu, C.M. Chang, and S.C. Huang, Some design considerations on the electrostatically actuated microstructures, Sens. Actuators, A, vol. 112, no. 1, pp. 155–161, 2004.
   Web of Science ®Google Scholar