275
Views
19
CrossRef citations to date
0
Altmetric
Original Articles

Torsional statics of two-dimensionally functionally graded microtubes

ORCID Icon &
Pages 430-442 | Received 12 Feb 2017, Accepted 29 Jul 2017, Published online: 05 Dec 2017

References

  • J. Guo, J. Chen, and E. Pan, “Size-dependent behavior of functionally graded anisotropic composite plates,” Int. J. Eng. Sci., vol. 106, pp. 110–124, 2016.
  • P. Fan, Z. Z. Fang, and J. Guo, “A review of liquid phase migration and methods for fabrication of functionally graded cemented tungsten carbide,” Int. J. Refract. Metals Hard Mater., vol. 36, pp. 2–9, 2013.
  • C. Lü, C. W. Lim, and W. Chen, “Size-dependent elastic behavior of fgm ultra-thin films based on generalized refined theory,” Int. J. Solids Struct., vol. 46, no. 5, pp. 1176–1185, 2009.
  • H.-T. Thai, and S.-E. Kim, “A review of theories for the modeling and analysis of functionally graded plates and shells,” Compo. Struct., vol. 128, pp. 70–86, 2015.
  • A. Gupta, and M. Talha, “Recent development in modeling and analysis of functionally graded materials and structures,” Prog. Aerosp. Sci., vol. 79, pp. 1–14, 2015.
  • P. T. Thang, and T. Nguyen-Thoi, “Effect of stiffeners on nonlinear buckling of cylindrical shells with functionally graded coatings under torsional load,” Compos. Struct., vol. 153, pp. 654–661, 2016.
  • H.-L. Dai, Y.-N. Rao, and T. Dai, “A review of recent researches on fgm cylindrical structures under coupled physical interactions, 2000–2015,” Compos. Struct., vol. 152, pp. 199–225, 2016.
  • E. Pan, and F. Han, “Exact solution for functionally graded and layered magneto-electro-elastic plates,” Int. J. Eng. Sci., vol. 43, no. 3, pp. 321–339, 2005.
  • Y. Liu, and D. Shu, “Free vibration analysis of exponential functionally graded beams with a single delamination,” Compos. B Eng., vol. 59, pp. 166–172, 2014.
  • C. Zhang, N. Waksmanski, V. M. Wheeler, E. Pan, and R. E. Larsen, “The effect of photodegradation on effective properties of polymeric thin films: A micromechanical homogenization approach,” Int. J. Eng. Sci., vol. 94, pp. 1–22, 2015.
  • A.-Y. Tang, J.-X. Wu, X.-F. Li, and K. Lee, “Exact frequency equations of free vibration of exponentially non-uniform functionally graded Timoshenko beams,” Int. J, Mech. Sci., vol. 89, pp. 1–11, 2014.
  • S. Filiz, and M. Aydogdu, “Wave propagation analysis of embedded (coupled) functionally graded nanotubes conveying fluid,” Compo. Struct., vol. 132, pp. 1260–1273, 2015.
  • L. Li, Y. Hu, and L. Ling, “Flexural wave propagation in small-scaled functionally graded beams via a nonlocal strain gradient theory,” Compos. Struct., vol. 133, pp. 1079–1092, 2015.
  • B. Uymaz, “Forced vibration analysis of functionally graded beams using nonlocal elasticity,” Compos. Struct., vol. 105, pp. 227–239, 2013.
  • M. Hamed, M. Eltaher, A. Sadoun, and K. Almitani, “Free vibration of symmetric and sigmoid functionally graded nanobeams,” Appl. Phys. A, vol. 122, no. 9, pp. 829, 2016.
  • L. Li, X. Li, and Y. Hu, “Free vibration analysis of nonlocal strain gradient beams made of functionally graded material,” Int. J. Eng. Sci., vol. 102, pp. 77–92, 2016.
  • K. Kiani, “Longitudinal and transverse instabilities of moving nanoscale beam-like structures made of functionally graded materials,” Compos. Struct., vol. 107, pp. 610–619, 2014.
  • M. Şimşek, “Nonlinear free vibration of a functionally graded nanobeam using nonlocal strain gradient theory and a novel hamiltonian approach,” Int. J. Eng. Sci., vol. 105, pp. 12–27, 2016.
  • L. Li, and Y. Hu, “Nonlinear bending and free vibration analyses of nonlocal strain gradient beams made of functionally graded material,” Int. J. Eng. Sci., vol. 107, pp. 77–97, 2016.
  • H. Li, J. Lambros, B. Cheeseman, and M. Santare, “Experimental investigation of the quasi-static fracture of functionally graded materials,” Int. J. Solids Struct., vol. 37, no. 27, pp. 3715–3732, 2000.
  • Y. Miyamoto, W. Kaysser, B. Rabin, A. Kawasaki, and R. G. Ford, Functionally Graded Materials: Design, Processing and Applications, vol. 5. New York: Springer Science & Business Media, 2013.
  • S. Kapuria, M. Bhattacharyya, and A. Kumar, “Bending and free vibration response of layered functionally graded beams: A theoretical model and its experimental validation,” Compos. Struct., vol. 82, no. 3, pp. 390–402, 2008.
  • C.-E. Rousseau, V. Chalivendra, H. Tippur, and A. Shukla, “Experimental fracture mechanics of functionally graded materials: An overview of optical investigations,” Exp. Mech., vol. 50, no. 7, pp. 845–865, 2010.
  • M. Asgari, M. Akhlaghi, and S. M. Hosseini, “Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading,” Acta Mech., vol. 208, no. 3–4, pp. 163, 2009.
  • M. Asgari, and M. Akhlaghi, “Natural frequency analysis of 2D-FGM thick hollow cylinder based on three-dimensional elasticity equations,” Eur. J. Mech.-A/Solids, vol. 30, no. 2, pp. 72–81, 2011.
  • S. Satouri, M. Kargarnovin, F. Allahkarami, and A. Asanjarani, “Application of third order shear deformation theory in buckling analysis of 2D-functionally graded cylindrical shell reinforced by axial stiffeners,” Compos. B: Eng., vol. 79, pp. 236–253, 2015.
  • B. S. Aragh, and H. Hedayati, “Static response and free vibration of two-dimensional functionally graded metal/ceramic open cylindrical shells under various boundary conditions,” Acta Mech., vol. 223, no. 2, pp. 309–330, 2012.
  • M. Şimşek, “Bi-directional functionally graded materials (BDFGMS) for free and forced vibration of Timoshenko beams with various boundary conditions,” Compos. Struct., vol. 133, pp. 968–978, 2015.
  • D. K. Nguyen, Q. H. Nguyen, T. T. Tran, and V. T. Bui, “Vibration of bi-dimensional functionally graded Timoshenko beams excited by a moving load,” Acta Mech., vol. 228, no. 1, pp. 141–155, 2017. DOI:10.1007/s00707-016-1705-3.
  • H. Deng, and W. Cheng, “Dynamic characteristics analysis of bi-directional functionally graded Timoshenko beams,” Compos. Struct., vol. 141, pp. 253–263, 2016.
  • M. Şimşek, “Buckling of Timoshenko beams composed of two-dimensional functionally graded material (2d-fgm) having different boundary conditions,” Compos. Struct., vol. 149, pp. 304–314, 2016.
  • A. Witvrouw, and A. Mehta, “The use of functionally graded poly-sige layers for MEMS applications,” Mater. Sci. Forum, vol. 492, pp. 255–260, 2005.
  • A. S. Mahmud, Y. Liu, and T.-H. Nam, “Gradient anneal of functionally graded NiTi,” Smart Mater. Struct., vol. 17, no. 1, pp. 015031, 2008.
  • L. Li, and Y. Hu, “Post-buckling analysis of functionally graded nanobeams incorporating nonlocal stress and microstructure-dependent strain gradient effects,” Int. J. Mech. Sci., vol. 120, pp. 159–170, 2017.
  • M. Rezaiee-Pajand, and N. Rajabzadeh-Safaei, “Nonlocal static analysis of a functionally graded material curved nanobeam,” Mech. Adv. Mater. Struct. DOI:10.1080/15376494.2017.1285463.
  • M. A. Eltaher, S. A. Emam, and F. F. Mahmoud, “Static and stability analysis of nonlocal functionally graded nanobeams,” Compos. Struct., vol. 96, pp. 82–88, 2013.
  • X. Li, L. Li, Y. Hu, Z. Ding, and W. Deng, “Bending, buckling and vibration of axially functionally graded beams based on nonlocal strain gradient theory,” Compos. Struct., vol. 165, pp. 250–265, 2017.
  • A. Daneshmehr“Stability of size dependent functionally graded nanoplate based on nonlocal elasticity and higher order plate theories and different boundary conditions,” Int. J. Eng. Sci., vol. 82, pp. 84–100, 2014.
  • N. Shafiei, M. Kazemi, and M. Ghadiri, “Nonlinear vibration of axially functionally graded tapered microbeams,” Int. J. Eng. Sci., vol. 102, pp. 12–26, 2016.
  • R. Nazemnezhad, and S. Hosseini-Hashemi, “Nonlocal nonlinear free vibration of functionally graded nanobeams,” Compos. Struct., vol. 110, pp. 192–199, 2014.
  • O. Rahmani, and O. Pedram, “Analysis and modeling the size effect on vibration of functionally graded nanobeams based on nonlocal timoshenko beam theory,” Int. J. Eng. Sci., vol. 77, pp. 55–70, 2014.
  • F. Ebrahimi, and E. Salari, “Size-dependent free flexural vibrational behavior of functionally graded nanobeams using semi-analytical differential transform method,” Compos. B Eng., vol. 79, pp. 156–169, 2015.
  • A. Daneshmehr, A. Rajabpoor, and A. Hadi, “Size dependent free vibration analysis of nanoplates made of functionally graded materials based on nonlocal elasticity theory with high order theories,” Int. J. Eng. Sci., vol. 95, pp. 23–35, 2015.
  • H. Farokhi, M. H. Ghayesh, and S. Hussain, “Large-amplitude dynamical behaviour of microcantilevers,” Int. J. Eng. Sci., vol. 106, pp. 29–41, 2016.
  • M. Panyatong, B. Chinnaboon, and S. Chucheepsakul, “Free vibration analysis of fg nanoplates embedded in elastic medium based on second-order shear deformation plate theory and nonlocal elasticity,” Compos. Struct., vol. 153, pp. 428–441, 2016.
  • R. Kolahchi, H. Hosseini, and M. Esmailpour, “Differential cubature and quadrature-bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories,” Compos. Struct., vol. 157, pp. 174–186, 2016.
  • X. Zhu, and L. Li, “Closed form solution for a nonlocal strain gradient rod in tension,” Int. J. Eng. Sci., vol. 119, pp. 16–28, 2017.
  • Y. Shen, Y. Chen, and L. Li, “Torsion of a functionally graded material,” Int. J. Eng. Sci., vol. 109, pp. 14–28, 2016.
  • W. Yang, F. Yang, and X. Wang, “Coupling influences of nonlocal stress and strain gradients on dynamic pull-in of functionally graded nanotubes reinforced nano-actuator with damping effects,” Sens. Actuat. A Phys., vol. 248, pp. 10–21, 2016.
  • F. Ebrahimi, M. R. Barati, and A. Dabbagh, “A nonlocal strain gradient theory for wave propagation analysis in temperature-dependent inhomogeneous nanoplates,” Int. J. Eng. Sci., vol. 107, pp. 169–182, 2016.
  • L. Li, and Y. Hu, “Torsional vibration of bi-directional functionally graded nanotubes based on nonlocal elasticity theory,” Compos. Struct., vol. 172, pp. 242–250, 2017.
  • M. Z. Nejad, A. Hadi, A. Rastgoo, “Buckling analysis of arbitrary two-directional functionally graded euler–bernoulli nano-beams based on nonlocal elasticity theory,” Int. J. Eng. Sci., vol. 103, pp. 1–10, 2016.
  • Ç. Demir, and Ö. Civalek, “Torsional and longitudinal frequency and wave response of microtubules based on the nonlocal continuum and nonlocal discrete models,” Appl. Math. Model., vol. 37, no. 22, pp. 9355–9367, 2013.
  • M. Arda, and M. Aydogdu, “Torsional statics and dynamics of nanotubes embedded in an elastic medium,” Compos. Struct., vol. 114, pp. 80–91, 2014.
  • L. Li, and Y. Hu, “Buckling analysis of size-dependent nonlinear beams based on a nonlocal strain gradient theory,” Int. J. Eng. Sci., vol. 97, pp. 84–94, 2015.
  • Z. Islam, P. Jia, and C. Lim, “Torsional wave propagation and vibration of circular nanostructures based on nonlocal elasticity theory,” Int. J. Appl. Mechan., vol. 6, no. 02, pp. 1450011, 2014.
  • F. Yang, A. Chong, D. Lam, and P. Tong, “Couple stress based strain gradient theory for elasticity,” Int. J. Solids Struct., vol. 39, no. 10, pp. 2731–2743, 2002.
  • D. Lam, F. Yang, A. Chong, J. Wang, and P. Tong, “Experiments and theory in strain gradient elasticity,” J. Mech. Phys. Solids, vol. 51, no. 8, pp. 1477–1508, 2003.
  • A. W. McFarland, and J. S. Colton, “Role of material microstructure in plate stiffness with relevance to microcantilever sensors,” J. Micromech. Microeng., vol. 15, no. 5, pp. 1060, 2005.
  • S. Park, and X. Gao, “Bernoulli–Euler beam model based on a modified couple stress theory,” J. Micromech. Microeng., vol. 16, no. 11, pp. 2355, 2006.
  • S. Nikolov, C.-S. Han, and D. Raabe, “On the origin of size effects in small-strain elasticity of solid polymers,” Int. J. Solids Struct., vol. 44, no. 5, pp. 1582–1592, 2007.
  • H. Ma, X.-L. Gao, and J. Reddy, “A microstructure-dependent timoshenko beam model based on a modified couple stress theory,” J. Mech. Phys. Solids, vol. 56, no. 12, pp. 3379–3391, 2008.
  • S. Kong, S. Zhou, Z. Nie, and K. Wang, “The size-dependent natural frequency of Bernoulli–Euler micro-beams,” Int. J. Eng. Sci., vol. 46, no. 5, pp. 427–437, 2008.
  • B. Gheshlaghi, and S. M. Hasheminejad, “Size dependent torsional vibration of nanotubes,” Phys. E: Low-Dimen. Syst. Nanostruct., vol. 43, no. 1, pp. 45–48, 2010.
  • M. Rahaeifard, “Size-dependent torsion of functionally graded bars,” Compos. B Eng., vol. 82, pp. 205–211, 2015.
  • M. E. Gurtin, and A. I. Murdoch, “Surface stress in solids,” Int. J. Solids Struct., vol. 14, no. 6, pp. 431–440, 1978.
  • J. Wang, Z. Huang, H. Duan, S. Yu, X. Feng, G. Wang, W. Zhang, and T. Wang, “Surface stress effect in mechanics of nanostructured materials,” Acta Mech. Solida Sinica, vol. 24, no. 1, pp. 52–82, 2011.
  • C. F. Lü, W. Q. Chen, and C. W. Lim, “Elastic mechanical behavior of nano-scaled FGM films incorporating surface energies,” Compos. Sci. Technol., vol. 69, no. 7, pp. 1124–1130, 2009.
  • X.-L. Gao, and F. Mahmoud, “A new bernoulli–euler beam model incorporating microstructure and surface energy effects,” Zeitschrift für angewandte Mathematik und Physik, vol. 65, no. 2, pp. 393–404, 2014.
  • X.-L. Gao, and G. Zhang, “A non-classical kirchhoff plate model incorporating microstructure, surface energy and foundation effects,” Contin. Mech. Thermodyn., vol. 28, no. 1–2, pp. 195, 2016.
  • L. Li, Y. Hu, and L. Ling, “Wave propagation in viscoelastic single-walled carbon nanotubes with surface effect under magnetic field based on nonlocal strain gradient theory,” Physi. E Low-Dimen. Syst. Nanostruct., vol. 75, pp. 118–124, 2016.
  • M. Reza Barati, and H. Shahverdi, “Vibration analysis of multi-phase nanocrystalline silicon nanoplates considering the size and surface energies of nanograins/nanovoids,” Int. J. Eng. Sci., vol. 119, pp. 128–141, 2017.
  • M. A. Attia, “On the mechanics of functionally graded nanobeams with the account of surface elasticity,” Int. J. Eng. Sci., vol. 115, pp. 73–101, 2017.
  • J.-Q. Zhang, S.-W. Yu, X.-Q. Feng, and G.-F. Wang, “Theoretical analysis of adsorption-induced microcantilever bending,” J. Appl. Physi., vol. 103, no. 9, pp. 093506, 2008.
  • J.-Q. Zhang, S.-W. Yu, and X.-Q. Feng, “Theoretical analysis of resonance frequency change induced by adsorption,” J. Phys. D Appl. Phys., vol. 41, no. 12, pp. 125306, 2008.
  • A. Shukla, and N. Jain, “Dynamic damage growth in particle reinforced graded materials,” Int. J. Impact Eng., vol. 30, no. 7, pp. 777–803, 2004.
  • X. Yao, W. Xu, and H. Yeh, “Investigation of crack tip evolution in functionally graded materials using optical caustics,” Polym. Test., vol. 26, no. 1, pp. 122–131, 2007.
  • A. Giannakopoulos, and S. Suresh, “Indentation of solids with gradients in elastic properties: Part I. Point force,” Int. J. Solids Struct., vol. 34, no. 19, pp. 2357–2392, 1997.
  • Y.-P. Cao, F. Jia, Y. Zhao, X.-Q. Feng, and S.-W. Yu, “Buckling and post-buckling of a stiff film resting on an elastic graded substrate,” Int. J. Solids Struct., vol. 49, no. 13, pp. 1656–1664, 2012.
  • M. Azadi, and M. Azadi, “Nonlinear transient heat transfer and thermoelastic analysis of thick-walled fgm cylinder with temperature-dependent material properties using hermitian transfinite element,” J. Mech. Sci. Technol., vol. 23, no. 10, pp. 2635–2644, 2009.
  • S. M. Hosseini, M. Akhlaghi, and M. Shakeri, “Heat conduction and heat wave propagation in functionally graded thick hollow cylinder base on coupled thermoelasticity without energy dissipation,” Heat Mass Transf., vol. 44, no. 12, pp. 1477–1484, 2008.
  • A. Akbarzadeh, J. Fu, Z. Chen, and L. Qian, “Dynamic eigenstrain behavior of magnetoelastic functionally graded cellular cylinders,” Compos. Struct., vol. 116, pp. 404–413, 2014.
  • H.-L. Dai, and Y.-N. Rao, “Dynamic thermoelastic behavior of a double-layered hollow cylinder with an FGM layer,” J. Therm. Stress., vol. 36, no. 9, pp. 962–984, 2013.
  • F. P. Beer, R. Johnston, J. Dewolf, and D. Mazurek, Mechanics of Materials, 6th ed. New York, USA: McGraw-Hill, 2012.
  • S. S. Rao, and F. F. Yap, Mechanical Vibrations. New York: Addison-Wesley, 1995.
  • T. Y. Wu, and G. R. Liu, “A differential quadrature as a numerical method to solve differential equations,” Comput. Mech, vol. 24, no. 3, pp. 197–205, 1999.
  • T. Wu, and G. Liu, “Application of generalized differential quadrature rule to sixth-order differential equations,” Commun. Num. Methods Eng., vol. 16, no. 11, pp. 777–784, 2000.
  • S. Singh, and S. Ray, “Creep analysis in an isotropic FGM rotating disc of Al–SiC composite,” J. Mater. Process. Technol., vol. 143, pp. 616–622, 2003.
  • L. L. Mishnaevsky, “Functionally gradient metal matrix composites: Numerical analysis of the microstructure–strength relationships,” Compos. Sci. Technol., vol. 66, no. 11, pp. 1873–1887, 2006.
  • M. Bhattacharyya, S. Kapuria, and A. Kumar, “On the stress to strain transfer ratio and elastic deflection behavior for al/sic functionally graded material,” Mech. Adv. Mater. Struct., vol. 14, no. 4, pp. 295–302, 2007.
  • T. Rajan, R. Pillai, and B. Pai, “Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites,” Mater. Charact., vol. 61, no. 10, pp. 923–928, 2010.
  • X. Liu, Y. Ma, and X. Yao, “Experimental investigation of deformation and fracture in multilayered graded material,” J. Strain Anal. Eng. Des., vol. 48, no. 8, pp. 474–481, 2013.
  • J. R. Quan, and C. T. Chang, “New insights in solving distributed system equations by the quadrature method–II: Numerical experiments,” Comput. Chem. Eng., vol. 13, no. 9, pp. 1017–1024, 1989.
  • C. Shu, and B. E. Richards, “Application of generalized differential quadrature to solve two-dimensional incompressible navier–stokes equations,” Int. J. Num. Meth. Fluids, vol. 15, no. 7, pp. 791–798, 1992.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.