http://orcid.org/0000-0002-7182-7211
References
- M. W. Hyer, Stress Analysis of Fiber-reinforced Composite Materials, updated ed., DEStech Publications, Lancaster, Pennsylvania, 2009.
- A. Bentur and S. Mindess, Fibre reinforced cementitious composites, CRC Press, 2006.
- H. Stang and V. C. Li, “Extrusion of ECC-material,” Proc. High Perform. Fiber Reinf. Cem. Compos., vol. 3, pp. 203–212, 1999.
- B. Y. Lee, B. C. Han, C. G. Cho, Y. J. Kwon, and Y. Y. Kim, “Fiber distribution characteristics and flexural performance of extruded ECC panel,” J. Korea Concr. Inst., vol. 21, no. 5, pp. 573–580, 2009. doi:10.4334/JKCI.2009.21.5.573.
- S. T. Kang, Y. L. Bang, and K. T. Koh, “Prediction of fiber dispersionorientation in fiber-reinforced cementitious composites,” J. Korea Concr. Inst., vol. 25, pp. 39–42, 2013.
- F. Laranjeira, S. Grünewald, H. Walraven, C. Blom, C. Molins, and A. Aguado, “Characterization of the orientation profile of steel fiber reinforced concrete,” Mater. Struct., vol. 44, no. 6, pp. 1093–1111, 2011. doi:10.1617/s11527-010-9686-5.
- M. Teßmann, S. Mohr, S. Gayetskyy, U. Haßler, R. Hanke, and G. Greiner, “Automatic determination of fiber-length distribution in composite material using 3D CT data,” EURASIP J. Adv. Signal Process., vol. 1, pp. 545030, 2010. doi:10.1155/2010/545030.
- S. Torigoe, T. Horikoshi, A. Ogawa, T. Saito, and T. Hamada, “Study on evaluation method for PVA fiber distribution in engineered cementitious composite,” J. Adv. Concr. Technol., vol. 1, no. 3, pp. 265–268, 2003. doi:10.3151/jact.1.265.
- I. Şanal and N. Ö. Zihnioǧlu, “To what extent does the fiber orientation affect mechanical performance?” Constr. Build. Mater., vol. 44, pp. 671–681, 2013. doi:10.1016/j.conbuildmat.2013.03.079.
- Y. Farnam, M. Moosavi, M. Shekarchi, S. K. Babanajad, and A. Bagherzadeh, “Behavior of slurry infiltrated fibre concrete (SIFCON) under triaxial compression,” Cem. Concr. Res., vol. 40, no. 11, pp. 1571–81, 2010. doi:10.1016/j.cemconres.2010.06.009.
- R. Quintana, J. W. Choi, K. Puebla, and R. Wicker, “Effects of build orientation on tensile strength for stereolithography-manufactured ASTM D-638 type I specimens,” Int. J. Adv. Manuf. Technol., vol. 46, no. 1, pp. 201–215, 2010. doi:10.1007/s00170-009-2066-z.
- M. W. Barclift and C. B. Williams, “Examining variability in the mechanical properties of parts manufactured via polyjet direct 3D printing,” Int. Solid Freeform Fabr. Symp., pp. 6–8, 2012.
- S. Christ, M. Schnabel, E. Vorndran, J. Groll, and U. Gbureck, “Fiber reinforcement during 3D printing,” Mater. Lett., vol. 139, pp. 165–168, 2015. doi:10.1016/j.matlet.2014.10.065.
- X. Wang, M. Jiang, Z. Zhou, J. Gou, and D. Hui, “3D printing of polymer matrix composites: A review and prospective,” Compos. Part B Eng., vol. 110, pp. 442–458, 2017. doi:10.1016/j.compositesb.2016.11.034.
- Y. J. Nam, J. W. Park, S. H. Yoon, and Y. M. Lim, “3D printing of fibers and reinforcements for cementitious composites to maximize the fracture-resisting performance of FRCCs.” Proc. 9th Int. Conf. Fract. Mech. Concr. Concr. Struct., pp. 1–7, 2016.