References
- S. E. Khadem, M. Rasekh, and A. Toghraee, “Design and simulation of a carbon nanotube-based adjustable nano-electromechanical shock switch,” Appl. Math. Modell., vol. 36, pp. 2329–2339, 2012.
- X. Li, B. Bhushan, K. Takashima, C. W. Baek, and Y. K. Kim, “Mechanical characterization of micro/nanoscale structures for MEMS/NEMS applications using nanoindentation techniques,” Ultramicroscopy, vol. 97, pp. 481–494, 2003.
- F. Najar, A. H. Nayfeh, E. M. Abdel-Rahman, S. Choura, and S. El-Borgi, “Global stability of microbeam-based electrostatic microactuators,” J. Vib. Control., vol. 16, pp. 721–748, 2010.
- J. Pei, F. Tian, and T. Thundat, “Glucose biosensor based on the microcantilever,” Anal. Chem., vol. 76, pp. 292–297, 2004.
- M. Li, H. X. Tang, and M. L. Roukes, “Ultra-sensitive NEMS-based cantilevers for sensing, scanned probe and very high-frequency applications,” Nat. Nanotechnol., vol. 2, pp. 114–120, 2007.
- A. C. Eringen, “Nonlocal polar elastic continua,” Int. J. Eng. Sci., vol. 10, pp. 1–16, 1972.
- A. C. Eringen. Nonlocal Continuum Field Theories, Springer-Verlag, New York, 2002.
- A. C. Eringen and D. Edelen, “On nonlocal elasticity,” Int. J. Eng. Sci., vol. 10, pp. 233–248, 1972.
- J. N. Reddy, “Nonlocal theories for bending, buckling and vibration of beams,” Int. J. Eng. Sci., vol. 45, pp. 288–307, 2007.
- J. N. Reddy and S. D. Pang, “Nonlocal continuum theories of beams for the analysis of carbon nanotubes,” Appl. Phys. Lett., vol. 103, no. 023511, pp. 16, 2008.
- C. M. Wang, S. Kitipornchai, C. W. Lim, and M. Eisenberger, “Beam bending solutions based on nonlocal Timoshenko beam theory,” J. Eng. Mech., vol. 134, pp. 475–481, 2008.
- C. M. Wang, Y. Y. Zhang, S. S. Ramesh, and S. Kitipornchai, “Buckling analysis of micro- and nano-rods/tubes based on nonlocal Timoshenko beam theory,” J. Phys. D-Appl. Phys., vol. 39, pp. 3904–3909, 2006.
- H. T. Thai, “A nonlocal beam theory for bending, buckling, and vibration of nanobeams,” Int. J. Eng. Sci., vol. 52, pp. 56–64, 2012.
- H. T. Thai and T. P. Vo, “A nonlocal sinusoidal shear deformation beam theory with application to bending, buckling, and vibration of nanobeams,” Int. J. Eng. Sci., vol. 54, pp. 58–66, 2012.
- M. Aydogdu, “A general nonlocal beam theory: Its application to nanobeam bending, buckling and vibration,” Phys. E, vol. 41, pp. 1651–1655, 2009.
- M. Aydogdu, “Longitudinal wave propagation in multiwalled carbon nanotubes,” Compos. Struct., vol. 107, pp. 578–584, 2014.
- M. A. Eltaher, M. A. Hamed, A. M. Sadoun, and A. Mansour, “Mechanical analysis of higher order gradient nanobeams,” Appl. Math. Comput., vol. 229, pp. 260–272, 2014.
- M. A. Eltaher, A. E. Alshorbagy, and E. F. Mahmoud, “Vibration analysis of Euler–Bernoulli nanobeams by using finite element method,” Appl. Math. Modell., vol. 37, pp. 4787–4797, 2013.
- O. Civalek and C. Demir, “A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method,” Appl. Math. Comput., vol. 289, pp. 335–352, 2016.
- C. Demir and O. Civalek, “A new nonlocal FEM via Hermitian cubic shape functions for thermal vibration of nanobeams surrounded by an elastic matrix,” Compos. Struct., vol. 168, pp. 872–884, 2007.
- M. A. Eltaher, S. A. Emam, and F. F. Mahmoud, “Static and stability analysis of nonlocal functionally graded nanobeams,” Compos. Struct., vol. 96, pp. 82–88, 2013.
- M. A. Eltaher, S. A. Emam, and F. F. Mahmoud, “Free vibration analysis of functionally graded size-dependent nanobeams,” Appl. Math. Comput., vol. 218, pp. 7406–7420, 2012.
- N. T. Nguyen, N. I. Kim, and J. Lee, “Mixed finite element analysis of nonlocal Euler–Bernoulli nanobeams,” Finite Elem. Anal. Des., vol. 106, pp. 65–72, 2015.
- S. C. Pradhan, “Nonlocal finite element analysis and small scale effects of CNTs with Timoshenko beam theory,” Finite Elem. Anal. Des., vol. 50, pp. 8–20, 2012.
- S. C. Pradhan and U. Mandal, “Finite element analysis of CNTs based on nonlocal elasticity and Timoshenko beam theory including thermal effect,” Physica E, vol. 53, pp. 223–232, 2013.
- M. A. Eltaher, A. Khairy, A. M. Sadoun, and F. A. Omar, “Static and buckling analysis of functionally graded Timoshenko nanobeams,” Appl. Math. Comput., vol. 229, pp. 283–295, 2014.
- G. P. Lignola, F. R. Spena, A. Prota, and G. Manfredi, “Exact stiffness-matrix of two nodes Timoshenko beam on elastic medium-An analogy with Erigen model of nonlocal Euler–Bernoulli nanobeams,” Comput. Struct., vol. 182, pp. 556–572, 2017.
- J. N. Reddy and S. El-Borgi, “Eringen's nonlocal theories of beams accounting for moderate rotations,” Int. J. Eng. Sci., vol. 82, pp. 159–177, 2014.
- J. N. Reddy, S. El-Borgi, and J. Romanoff, “Nonlinear analysis of functionally graded microbeams using Eringen's nonlocal differential model,” Int. J. Non-linear Mech., vol. 67, pp. 308–318, 2014.
- M. A. Eltaher, S. El-Borgi, and J. N. Reddy, “Nonlinear analysis of size-dependent and material-dependent nonlocal CNTs,” Compos. Struct., vol. 153, pp. 902–913, 2016.
- K. Preethi, A. Rajagopal, and J. N. Reddy, “Surface and nonlocal effects for nonlinear analysis of Timoshenko beams,” Int. J. Non-linear Mech., vol. 76, pp. 100–111, 2015.
- E. Reissner, “On a certain mixed variational theorem and a proposed application,” Int. J. Numer. Methods Eng., vol. 20, pp. 1366–1368, 1984.
- E. Reissner, “On a mixed variational theorem and on shear deformable plate theory,” Int. J. Numer. Methods Eng., vol. 23, pp. 193–198, 1986.
- E. Carrera, “An assessment of mixed and classical theories on global and local response of multilayered orthotropic plates,” Compos. Struct., vol. 50, pp. 183–198, 2000.
- E. Carrera, “Assessment of theories for free vibration analysis of homogeneous and multilayered plates,” Shock Vib., vol. 11, pp. 261–270, 2004.
- C. P. Wu and H. Y. Li, “The RMVT- and PVD-based finite layer methods for the three-dimensional analysis of multilayered composite and FGM plates,” Compos. Struct., vol. 92, pp. 2476–2496, 2010.
- C. P. Wu and S. K. Chang, “Stability of carbon nanotube-reinforced composite plates with surface-bonded piezoelectric layers and under bi-axial compression,” Compos. Struct., vol. 111, pp. 587–601, 2014.
- S. Brischetto and E. Carrera, “Advanced mixed theories for bending analysis of functionally graded plates,” Comput. Struct., vol. 88, pp. 1474–1483, 2010.
- S. Brischetto and E. Carrera, “Refined 2D models for the analysis of functionally graded piezoelectricity plates,” J. Intell. Mater. Syst. Struct., vol. 20, pp. 1783–1797, 2009.
- C. P. Wu, K. H. Chiu, and Y. M. Wang, “A review on the three-dimensional analytical approaches of multilayered and functionally graded piezoelectric plates and shells,” CMC-Comput. Mater. Continua, vol. 18, pp. 93–132, 2008.
- C. P. Wu and Y. C. Liu, “A review of semi-analytical numerical methods for laminated composite and multilayered functionally graded elastic/piezoelectric plates and shells,” Compos. Struct., vol. 147, pp. 1–15, 2016.
- C. P. Wu and W. W. Lai, “Reissner's mixed variational theorem-based nonlocal Timoshenko beam theory for a single-walled carbon nanotube embedded in an elastic medium and with various boundary conditions,” Compos. Struct., vol. 122, pp. 390–404, 2015.
- C. P. Wu and W. W. Lai, “Free vibration of an embedded single-walled carbon nanotube with various boundary conditions using the RMVT-based nonlocal Timoshenko beam theory and DQ method,” Phys. E, vol. 68, pp. 8–21, 2015.
- Y. M. Wang, S. M. Chen, and C. P. Wu, “A meshless collocation method based on the differential reproducing kernel interpolation,” Comput. Mech., vol. 45, pp. 585–606, 2010.
- S. M. Chen, C. P. Wu, and Y. M. Wang, “A Hermite DRK interpolation-based collocation method for the analysis of Bernoulli–Euler beams and Kirchhoff –Love plates,” Comput. Mech., vol. 47, pp. 425–453, 2011.
- C. W. Bert and M. Malik, “Differential quadrature: A powerful new technique for analysis of composite structures,” Compos. Struct., vol. 3, pp. 179–189, 1997.
- H. Du, M. Lim, and R. Lin, “Application of generalized differential quadrature method to structural problems,” Int. J. Numer. Methods Eng., vol. 37, pp. 1881–1896, 1994.
- C. P. Wu and C. Y. Lee, “Differential quadrature solution for the free vibration analysis of laminated conical shells with variable stiffness,” Int. J. Mech. Sci., vol. 43, pp. 1853–1869, 2001.
- C. P. Wu, Z. L. Hong, and Y. M. Wang, “Geometrically nonlinear static analysis of an embedded multi-walled carbon nanotube and the van der Waals interaction,” J. Nanomech. Micromech., vol. 7, p. 04017012, 2017.
- Q. Wang and C. Wang, “The constitutive relation and small scale parameter of nonlocal continuum mechanics for modelling carbon nanotubes,” Nanotechnol, vol. 18, pp. 075702, 2007.
- X. Q. He, S. Kitipornchai, and K. M. Liew, “Buckling analysis of multi-walled carbon nanotubes: A continuum model accounting for van der Waals interaction,” J. Mech. Phys. Solids, vol. 53, pp. 303–326, 2005.
- X. Q. He, S. Kitipornchai, C. M. Wang, and K. M. Liew, “Modeling of van der Waals force for infinitesimal deformation of multi-walled carbon nanotubes treated as cylindrical shells,” Int. J. Solids Struct., vol. 42, pp. 6032–6047, 2005.
- C. Q. Ru, “Elastic models for carbon nanotubes,” Encyclopedia Nanosci. Nanotech., vol. 2, pp. 731–744, 2004.
- C. Q. Ru, “Column buckling of multiwalled carbon nanotubes with interlayer radial displacements,” Phys. Rev. B, vol. 62, p. 16962, 2000.
- G. Cowper, “The shear coefficient in Timoshenko's beam theory,” J. Appl. Mech., vol. 33, pp. 335–340, 1966.
- J. N. Reddy. Energy and Variational Methods in Applied Mechanics, Wiley-Interscience Publication, New York, 1984.
- J. N. Reddy. An Introduction to the Finite Element Method, McGraw-Hill Book Company, New York, 1984.
- M. Simsek, “Nonlinear static and free vibration analysis of microbeams based on the nonlinear elastic foundation using modified couple stress theory and He's variational method,” Compos. Struct., vol. 112, pp. 264–272, 2014.
- Q. Yang and C. W. Lim, “Nonlinear thermal bending for shear deformable nanobeams based on nonlocal elasticity theory,” Int. J. Aerospace Lightweight Struct., vol. 1, pp. 89–107, 2011.