Development of a connector element for multi-material bolted-joint under tensile loading

References

• B. Langrand, E. Deletombe, E. Markiewicz, and P. Drazétic, “Riveted joint modeling for numerical analysis of airframe crash-worthiness,” Finite Elem Anal Des., vol. 38, pp. 21–44, 2001. DOI: 10.1016/S0168-874X(01)00050-6.
   Web of Science ®Google Scholar
• W. D. Nelson, B. L. Bunin, and L. J. Hart-Smith, “Critical joints in large composite aircraft structure,” Proceedings of Sixth Conference on Fibrous Composites in Structural Design, pp. II–1–II–38, January 24–27, 1983.
   Google Scholar
• Z. Kapidzic, L. Nilsson, and H. Ansell, “Finite element modelling of mechanically fastened composite-aluminium joints in aircraft structures,” Compos. Struct.., vol. 109, pp. 198–215, 2014. DOI: 10.1016/j.compstruct.2013.10.056.
   Web of Science ®Google Scholar
• J. Ekh, Multi-Fastener Single-lap Joints in Composite Structures. Thesis, Royal Institute of Technology SE–100 44 Stockholm, Sweden, 2006.
   Google Scholar
• T. Ireman, “Three-dimensional stress analysis of bolted single-lap composite joints,” Compos. Struct.., vol. 43, pp. 195–216, 1998. DOI: 10.1016/S0263-8223(98)00103-2.
   Web of Science ®Google Scholar
• G. S. Padhi, M. A. McCarthy, and C. T. McCarthy, “BOLJAT: a tool for designing composite bolted joints using three-dimensional finite element analysis,” Compos.: Part A., vol. 33, pp. 1573–1584, 2002. DOI: 10.1016/S1359-835X(02)00113-6.
   Web of Science ®Google Scholar
• C. T. McCarthy, and M. A. McCarthy, “Three-dimensional finite element analysis of single-bolt, single-lap composite bolted-joints: Part II-effect of bolt-hole clearance,” Compos. Struct.., vol. 71, pp. 159–175, 2005. DOI: 10.1016/j.compstruct.2004.09.023.
   Web of Science ®Google Scholar
• X. F. Hu, A. Haris, M. Ridha, V. B. C. Tan, and T. E. Tay, “Progressive failure of bolted single-lap joints of woven fibre-reinforced composites,” Compos. Struct.., vol. 189, pp. 443–454, 2018. DOI: 10.1016/j.compstruct.2018.01.104.
   Web of Science ®Google Scholar
• C. T. McCarthy, and M. A. McCarthy, “A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints,” Compos. Part B – Eng.., vol. 41, no. 4, pp. 317–325, 2010. DOI: 10.1016/j.compositesb.2010.03.001.
   Web of Science ®Google Scholar
• T. S. Kim, and H. Kawamura, “Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear,” Thin-Walled Struct.., vol. 45, pp. 407–421, 2007. DOI: 10.1016/j.tws.2007.03.006.
   Web of Science ®Google Scholar
• T. Dang Hoang, C. Herbelot, and A. Imad, “Rupture and damage mechanism analysis of a bolted assembly using coupling techniques between A.E. and D.I.C,” Eng. Struct.., vol. 32, pp. 2793–2803, 2010. DOI: 10.1016/j.engstruct.2010.04.048.
   Web of Science ®Google Scholar
• T. Dang Hoang, C. Herbelot, and A. Imad, “On failure mode analysis in a bolted single lap joint under tension-shearing,” Eng. Fail. Anal.., vol. 24, pp. 9–25, 2012. DOI: 10.1016/j.engfailanal.2012.03.006.
   Web of Science ®Google Scholar
• B. Mandal, and A. Chakrabarti, “A simple homogenization scheme for 3D finite element analysis of composite bolted joints,” Compos. Struct.., vol. 120, pp. 1–9, 2015. DOI: 10.1016/j.compstruct.2014.09.061.
   Web of Science ®Google Scholar
• J. Ekh, and J. Schön, “Finite element modeling, and optimization of load transfer in multi-fastener joints using structural elements,” Compos. Struct.., vol. 82, no. 2, pp. 245–256, 2008. DOI: 10.1016/j.compstruct.2007.01.005.
   Web of Science ®Google Scholar
• J. Ekh, J. Schön, and L. Melin, “Secondary bending in a multi fastener, composite – to-aluminium single shear lap joints,” Compos. Part B: Eng.., vol. 36, no. 3, pp. 195–208, 2005. DOI: 10.1016/j.compositesb.2004.09.001.
   Web of Science ®Google Scholar
• P. J. Gray, and C. T. McCarthy, “A highly efficient user-defined finite element for load distribution analysis of large-scale bolted composite structures,” Compos. Sci. Technol.., vol. 71, pp. 1517–1527, 2011.
   Web of Science ®Google Scholar
• P. J. Gray, and C. T. McCarthy, “An analytical model for the prediction of through-thickness stiffness in tension-loaded composite bolted joints,” Compos. Struct.., vol. 94, pp. 2450–2459, 2012. DOI: 10.1016/j.compstruct.2012.02.011.
   Web of Science ®Google Scholar
• M. Friberg, “Fastener load distribution and interlaminar stresses in composite laminates,” Licentiate Thesis, Stockholm: Royal Institute of Technology, 2000.
   Google Scholar
• B. Langrand, “Experimental and numerical characterisation of riveted joints dynamically loaded,” Thesis, University of Valenciennes and Hainaut Cambrésis, 1998.
   Google Scholar
• E. Baumann, “Finite element analysis of advanced composite structures containing mechanically fastened joints,” Nucl. Eng. Des.., vol. 70, pp. 67–83, 1982. DOI: 10.1016/0029-5493(82)90268-0.
   Web of Science ®Google Scholar
• P. J. Gray, and C. T. McCarthy, “A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints,” Compos. Part B – Eng.., vol. 41, no. 4, pp. 317–325, 2010. DOI: 10.1016/j.compositesb.2010.03.001.
   Web of Science ®Google Scholar
• M. Bérot, J. Malrieu, and F. Bay, “An innovative strategy to create equivalent elements for modeling assembly points in joined structures,” Eng. Comput.., vol. 31, no. 3, pp. 453–466, 2014. DOI: 10.1108/EC-05-2012-0095.
   Google Scholar
• T. Dang Hoang, C. Herbelot, A. Imad, and N. Benseddiq, “Numerical modeling for prediction of ductile fracture of bolted structure under tension shear loading,” Finite Elem. Anal. Des.., vol. 67, pp. 56–65, 2013. DOI: 10.1016/j.finel.2012.12.003.
   Web of Science ®Google Scholar
• O. Omran, Development of a connector model for bolted-joint. Thesis, University of Picardie Jules Verne; 2015.
   Google Scholar
• O. Omran et al., “Development of an equivalent numerical model of bolted point based on an analytical solution,” Ninth Int. Conf. Eng. Comput. Technol., 2014.
   Google Scholar
• T. Charras, A. Millard, and P. Verpeaux, “Solution of 2D and 3D contact problems by mean of Lagrange multipliers in the CAST3M 2000 finite element program,” in Proceedings of the Conference on Contact Mechanics, M. H. Aliabadi and C. A. Brebbia, Eds. Southampton: Computer Mechanics Publication, 1993, pp. 183–194.
   Google Scholar