Research on the influence of carbon nanotubes (CNTs) on compressive strength and air-void structure of ultra-light foamed concrete

References

• E. K. Kunhanandan Nambiar and K. Ramamurthy, “Influence of filler type on the properties of foam concrete,” Cement Concrete Composites, vol. 28, pp. 475–480, 2006. DOI: 10.1016/j.cemconcomp.2005.12.001.
   Web of Science ®Google Scholar
• B. Chen and J. Liu, “Experimental research on properties of foamed concrete reinforced with polypropylene fibers,” J. Building Mater., vol. 13, no. 3, pp. 286–290, 2010. DOI: 10.3969/j.issn.1007-9629.2010.03.003.
   Google Scholar
• B. Song, et al., “Study on the influence of the fiber and fly ash on the property of the foam concrete,” J. Henan Polytech. Univ. (Natural Sci.), vol. 29, no. 3, pp. 403–405, 2010.
   Google Scholar
• Q. S. Yang, X. Q. He, X. Liu, F. F. Leng, and Y. W. Mai, “The effective properties and local aggregation effect of CNTS composites,” Composites Part B: Eng., vol. 43, no. 1, pp. 33–38, 2012. DOI: 10.1016/j.compositesb.2011.04.027.
   Web of Science ®Google Scholar
• S. Parveen, S. Rana, R. Fangueiro, and M. C. Paiva, “Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique,” Cement Concrete Res., vol. 73, pp. 215–227, 2015. DOI: 10.1016/j.cemconres.2015.03.006.
   Web of Science ®Google Scholar
• S. Lijima, “Helical microtubules of graphitic carbon,” Nature, vol. 6348, no. 354, pp. 56–58, 1991. DOI: 10.1038/354056a0.
   Web of Science ®Google Scholar
• P. Sehrawat, Abid, M. Talib, P. Gulati, S. S. Islam, and M. Khanuja, “Development of highly sensitive optical sensor from carbon nanotube-alumina nanocomposite free-standing films: CNTs loading dependence sensor performance Analysis,” Sensors Actuators A: Phys., vol. 269, pp. 62–69, 2018. DOI: 10.1016/j.sna.2017.10.062.
   Web of Science ®Google Scholar
• L. Liu, R. Bao, and J. H. Yi, “Well-dispersion of CNTs and enhanced mechanical properties in CNTs/Cu-Ti composites fabricated by Molecular level mixing,” J. AlloysCompounds, vol. 726, pp. 81–87, 2017. DOI: 10.1016/j.jallcom.2017.07.297.
   Web of Science ®Google Scholar
• K. Shirvanimoghaddam, M. M. Abolhasani, B. Polisetti, and M. Naebea, “Periodical patterning of a fully tailored nanocarbon on CNT for fabrication of thermoplastic composites,” Composites Part A., vol. 107, pp. 304–314, 2018.
   Web of Science ®Google Scholar
• J. F. Wang and W. Zhang, “An equivalent continuum meshless approach for material nonlinear analysis of CNT-reinforced composites,” CompositeStruct., vol. 188, pp. 116–125, 2018. DOI: 10.1016/j.compstruct.2018.01.004.
   Web of Science ®Google Scholar
• P. Chakravarthi, V. Ramnath, M. Vetrivel, A. Ranjith, B. K. Rohit, S. Vasanth, and S. Vignesh, “Determination of mechanical behaviour of Fe-CNT MMC,” Mater. Today: Proc., vol. 5, pp. 1176–1185, 2018. DOI: 10.1016/j.matpr.2017.11.199.
   Google Scholar
• S. Alrekabi, A. B. Cundy, A. Lampropoulos, and I. Savina, “Experimental Investigation on the Effect of Ultrasonication on Dispersion and Mechanical Performance of Multi-Wall Carbon Nanotube-Cement Mortar Composites,” Int. J. Struct. Civil Eng. Res., vol. 10, pp. 267–274, 2016. DOI: 10.1999/1307-6892/42496.
   Google Scholar
• S. Alrekabi, A. B. Cundy, A. Lampropoulos, R. L. D. Whitby, and I. Savina, “Effect of high-intensity sonication on the dispersion of carbon-based nanofilaments in cementitious composites, and its impact on mechanical performance,” Mater. Design, vol. 136, pp. 223–237, 2017. DOI: 10.1016/j.matdes.2017.09.061.
   Web of Science ®Google Scholar
• L. L. Zhang and W. X. Wang, “Influences research of polymer on pore structure and properties of foamed-concrete,” Chin. Concrete Cement Prod., vol. 9, pp. 9–12, 2011.
   Google Scholar
• J. Liu, Wei Qi, R. Q. Liu, and Y. Tian, “Research on the relationship between compressive strength and air-void characteristics of foamed concrete with hydrogen peroxide as foaming agent,” Concrete, vol. 319, no. 5, pp. 1–4, 2016.
   Google Scholar
• G. A. Rao, “Generalization of Abrams' law for cement mortars,” Cement Concrete Res., vol. 31, no. 3, pp. 495–502, 2011. DOI: 10.1016/S0008-8846(00)00473-7.
   Web of Science ®Google Scholar
• E. K. K. Nambiar and K. Ramamurthy, “Air-void characterisation of foam concrete,” Cement Concrete Res., vol. 37, no. 2, pp. 221–230, 2007. DOI: 10.1016/j.cemconres.2006.10.009.
   Web of Science ®Google Scholar
• E. K. K. Nambiar and K. Ramamurthy, “Models for strength prediction of foam concrete,” Mater. Struct., vol. 41, no. 2, pp. 247–254, 2008. DOI: 10.1617/s11527-007-9234-0.
   Web of Science ®Google Scholar
• R. Kumar and B. Bhattacharjee, “Porosity, pore size distribution and in situ strength of concrete,” Cement Concrete Res., vol. 33, no. 1, pp. 155–164, 2003. DOI: 10.1016/S0008-8846(02)00942-0.
   Web of Science ®Google Scholar
• M. O'Farrell, S. Wild, and B. B. Sabir, “Pore size distribution and compressive strength of waste clay brick mortar,” Cement Concrete Composites, vol. 23, no. 1, pp. 81–91, 2001. DOI: 10.1016/S0958-9465(00)00070-6.
   Web of Science ®Google Scholar
• Y. Shi, J. Z. Li, and D. M. Liu, “Fractal Theory used in pore structure of cement-based materials incorporated phosphorus slag,” Key Eng. Mater., vol. 405–406, pp. 384–389, 2009. DOI: 10.4028/www.scientific.net/KEM.405-406.384.
   Google Scholar