Plastic hinge integration methods for cyclic analysis of polymer concrete-filled fiber reinforced polymer tube beams

References

• Y. Shao, Behavior of FRP–concrete beam columns under cyclic Loading, PhD thesis, North Carolina State Univ., Raleigh, N.C. [Also, see under the same title: Shao Y, Mirmiran A. NCSUCFL Rep. No. RD-03-022003, 2003]. (2003).
   Google Scholar
• V. Tamuzs, R. Tepfers, E. Zile, and O. Ladnova, “Behavior of concrete cylinders confined by a carbon composite 3. Deformability and the ultimate axial strain,” Mech. Compos. Mater., vol. 42, No. 4, pp. 303–314, 2006. DOI:10.1007/s11029-006-0040-5.
   Web of Science ®Google Scholar
• H. A. Rasheed, M. Nassajy, S. Al Subaie, S. M. Abrishamchian, and A. Al Tamimi, “Suppressing delamination failure mode in concrete beams strengthened with short CFRP laminates, mechanics of advanced materials and structures,” vol. 18, no 3, pp. 194–200, 2011. DOI: 10.1080/15376494.2010.499022.
   Google Scholar
• J. Y. R. Liew, M. Xiong and D. Xiong. “Design of concrete filled tubular beam-columns with high strength steel and concrete,”. Structures, vol. 8, no. 2, pp. 213–26, 2016. DOI:10.1016/j.istruc.2016.05.005.
   Google Scholar
• S. Q. Chen, J. F. Li, L. A. Bisby, Y. M. Hu, and J. G. Teng, “Strain efficiency of FRP jackets in FRP-confined concrete-filled circular steel tubes,”, Int. J. Struct. Stab. Dyn., vol. 12, no. 1, pp. 75–94, 2012. DOI:10.1142/S0219455412004574.
   Web of Science ®Google Scholar
• A. Fam and S. Rizkalla, “Behavior of axially loaded concrete filled circular fiber-reinforced polymer tubes,”. ACI Structural J. V., vol. 98, No. 3, pp. 280–289, 2001.
   Web of Science ®Google Scholar
• R. A. Hawileh, M. Naser, and H. A. Rasheed, “Thermal-stress finite element analysis of CFRP strengthened concrete beam exposed to top surface fire loading,” Mechanics Adv. Materials Struct., vol. 18, no. 3, pp. 172–80, 2011. DOI: 10.1080/15376494.2010.499019.
   Web of Science ®Google Scholar
• A. Fam, B. Flisak, and S. Rizkalla, “Experimental and analytical modeling of concrete-filled fiber-reinforced polymer tubes subjected to combined bending and axial loads,”. ACI Struct. J., Vol. 100, No. 4, pp. 1–11, 2003.
   Web of Science ®Google Scholar
• S. Mandal, A. Hoskin, and A. Fam, “Influence of concrete strength on confinement effectiveness of Fiber-reinforced polymer circular jackets,”. ACI Struct. J., Vol. 102, No. 3, pp. 383–392, 2005.
   Web of Science ®Google Scholar
• TG. Harmon and KT. Slattery, “Advanced composite confinement of concrete,”. Proceedings of the 1st International Conference on Advanced Composite Materials in Bridges and Structures, Sherbrooke, Quebec, Canada, pp. 299–306, 1992.
   Google Scholar
• T. Rousakis, “Experimental investigation of concrete cylinders confined by carbon FRP sheets, under monotonic and cyclic axial compressive load”. Research Report, Chalmers University of Technology, Göteborg, Sweden, 2001.
   Google Scholar
• J. Gorninski, D. Dal Molin, and C. Kazmierczak, “Strength degradation of polymer concrete in acidic environments,”. Cement Concrete Composites, Vol. 29, No. 8, pp. 637–45, 2007. DOI:10.1016/j.cemconcomp.2007.04.001.
   Web of Science ®Google Scholar
• M. Harja, M. Barbuta, and L. Rusu, “Obtaining and characterization of the polymer concrete with Fly Ash,”. J. Applied Sci., Vol. 9, No. 1, pp. 88–96, 2009. DOI:10.3923/jas.2009.88.96.
   Google Scholar
• K. Aniskevich, J. Hristova, and J. Jansons, “Deformational properties of polymer concrete during long-term exposure to water,” Mech. Compos. Mater., vol. 39, No. 2, pp. 111–119, 2003. DOI:10.1023/A:1023401226872.
   Web of Science ®Google Scholar
• O. Oyawa, K. Sugiura, and E. Watanabe, “polymer concrete filled circular steel beams subjected to pure bending,”. Steel Composite Struct., vol. 4, no. 4, pp. 265–80, 2004. DOI:10.12989/scs.2004.4.4.265.
   Google Scholar
• E-B. Jeon, et al. “Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise rail way slab,”. Compos Struct., vol. 134, pp. 27–35, 2015. DOI:10.1016/j.compstruct.2015.08.082.
   Web of Science ®Google Scholar
• J. Reis, and ML. dos, “Mechanical characterization of fiber reinforced Polymer Concrete. Mat Res”, Vol. 8, No. 3, pp. 357–60, 2005. DOI:10.1590/S1516-14392005000300023.
   Google Scholar
• V. Toufigh, V. Toufigh, H. Saadatmanesh, and S. Ahmari, “Strength evaluation and energy dissipation behavior of fiber reinforced polymer concrete,”. Advances in Civil Engineering Materials (ACEM), ASTM, Vol. 2, No. 1, 2013. DOI:10.1520/ACEM20130074.
   Google Scholar
• ASTM C39/C39M-09a., “Standard test method for compressive strength of cylindrical concrete specimens”. West Conshohocken, PA, ASTM International, pp 7, 2009.
   Google Scholar
• ASTM C496 / C496M-11., “Standard test method for splitting tensile strength of cylindrical concrete specimens”. West Conshohocken, PA, ASTM International, pp 5, 2011.
   Google Scholar
• ASTM D3039/D3039M-08., “Standard test method for tensile properties of polymer matrix composite material”. West Conshohocken, PA, ASTM International, pp 13, 2008.
   Google Scholar
• ASTM D7264/D7264M-07., “Standard test method for flexural properties of polymer matrix composite materials”. West Conshohocken, PA, ASTM International, pp 11, 2007.
   Google Scholar
• International Code Council., “Acceptance criteria for concrete and reinforced and unreinforced masonry strengthening using externally bonded fiber-reinforced polymer (FRP) composite systems,”. ICC-AC, vol. 125, 2010.
   Google Scholar
• M. H. Scott, and G. L. Fenves, “Plastic Hinge integration methods for force-based beam–column elements,”. J. Struct. Eng., V., vol. 132, No. 2, pp. 244–252, 2006. DOI:10.1061/(ASCE)0733-9445(2006)132:2(244).
   Web of Science ®Google Scholar
• S. Mazzoni, F. McKenna, M. H. Scott, and G. L. Fenves, “Open system for earthquake engineering simulation user command-language manual-OpenSees version 2.4.0”. Berkeley, CA, Pacific Earthquake Engineering Research Center, Univ. of California, 2009.
   Google Scholar
• M. D'Amato, F. Braga, R. Gigliotti, S. Kunnath, and M. Laterza, “A Numerical general-purpose confinement model for nonlinear analysis of R/C members,”. Computers & Structures, V., vol. 102-103, pp. 64–75, 2012. DOI:10.1016/j.compstruc.2012.03.007.
   Web of Science ®Google Scholar
• A. Calabrese, J. P. Almeida, and R. Pinho, “Numerical issues in distributed inelasticity modeling of RC frame elements for seismic analysis,”. J. Earthquake Engineering, Vol. 14, No. S1, pp. 38–68, 2010. DOI:10.1080/13632461003651869.
   Web of Science ®Google Scholar
• R. Haj-Ali, and H. Kilic, “Nonlinear behavior of pultruded FRP composites,”. Composites, Part B, V., vol. 33, No. 3, pp. 173–191, 2002. DOI:10.1016/S1359-8368(02)00011-2
   Web of Science ®Google Scholar