A viscoelastoplastic constitutive model of semi-crystalline polymers under dynamic compressive loading: Application to PE and PA66

References

• M. Xu, G. Huang, S. Feng, G. McShane, and W.J. Stronge, “Static and dynamic properties of semi-crystalline polyethylene,” Polymers, vol. 8, no. 4, pp. 77, 2016.
   Web of Science ®Google Scholar
• M. F. Omar, H. M. Akil, and Z. A. Ahmad, “Effect of molecular structures on dynamic compression properties of polyethylene,” Mater. Sci. Eng. A, vol. 538, pp. 125–134, 2012.
   Web of Science ®Google Scholar
• V. Delhaye, A. H. Clausen, F. Moussy, O. S. Hopperstad, and R. Othman, “Mechanical response and microstructure investigation of a mineral and rubber modified polypropylene,” Polym. Test., vol. 29, no. 7, pp. 793–802, 2010.
   Web of Science ®Google Scholar
• Y. Zhou, V. Rangari, H. Mahfuz, S. Jeelani, and P. K. Mallick, “Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites,” Mater. Sci. Eng. A, vol. 402, no. 1–2, pp. 109–117, 2005.
   Web of Science ®Google Scholar
• C. H. Huang, J. S. Wu, and C. C. Huang, “Predicting the permeability and tensile behavior of high density polyethylene/tie/polyamide 6 three-layer films,” Polym. Int., vol. 53, no. 12, pp. 2099–2106, 2004.
   Web of Science ®Google Scholar
• H. Eyring, “Viscosity, plasticity, and diffusion as examples of absolute reaction rates,” J. Chem. Phys., vol. 4, no. 4, pp. 283–291, 1936.
   Google Scholar
• C. Bauwens-Crowet, “The compression yield behaviour of polymethyl methacrylate over a wide range of temperatures and strain-rates,” J. Mater. Sci., vol. 8, no. 7, pp. 968–979, 1973.
   Web of Science ®Google Scholar
• C. Bauwens-Crowet, J. C. Bauwens, and G. Homès, “The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests,” J. Mater. Sci., vol. 7, no. 2, pp. 176–183, 1972.
   Web of Science ®Google Scholar
• T. Vu-Khanh and M. E. Majdoubi, “Entropy change with yielding and fracture of polypropylene,” Theor. Appl. Fract. Mech., vol. 51, no. 2, pp. 111–116, 2009.
   Web of Science ®Google Scholar
• B. Farrokh and A. S. Khan, “A strain rate dependent yield criterion for isotropic polymers: Low to high rates of loading,” Eur. J. Mech., vol. 29, no. 2, pp. 274–282, 2010.
   Google Scholar
• E. Ghorbel, I. Hadriche, G. Casalino, N. Masmoudi, “Characterization of thermo-mechanical and fracture behaviors of thermoplastic polymers,” Materials (Basel), vol. 7, no. 1, pp. 375–398, 2014.
   PubMed Web of Science ®Google Scholar
• M. Nishida, R. Natsume, and M. Hayashi, Strain Rate Dependence of Yield Condition of Polyamide 11, Dynamic Behavior of Materials, Vol. 1, Springer, Cham, 2014, pp. 121–127.
   Google Scholar
• H. Fransplass, M. Langseth, and O. S. Hopperstad, “Experimental and numerical study of threaded steel fasteners under combined tension and shear at elevated loading rates,” Int. J. Impact Eng., vol. 76, pp. 118–125, 2015.
   Web of Science ®Google Scholar
• M. David and A. F. Johnson, “Effect of strain rate on the failure mechanisms and energy absorption in polymer composite elements under axial loading,” Compos. Struct., vol. 122, pp. 430–439, 2015.
   Web of Science ®Google Scholar
• D. A. Şerban, L. Marşavina, and N. Modler, “Finite element modelling of the progressive damage and failure of thermoplastic polymers in puncture impact,” Proc. Eng., vol. 109, pp. 97–104, 2015.
   Google Scholar
• D. W. Holmes, J. G. Loughran, and H. Suehrcke, “Constitutive model for large strain deformation of semicrystalline polymers,” Mech. Time Depend. Mater., vol. 10, no. 4, pp. 281–313, 2007.
   Web of Science ®Google Scholar
• A. D. Drozdov, “Finite viscoelasticity and viscoplasticity of semicrystalline polymers,” Continuum Mech. Thermodyn., vol. 19, no. 1–2, pp. 111–132, 2007.
   Web of Science ®Google Scholar
• A.D. Drozdov and J.d C. Christiansen, “Viscoelasticity and viscoplasticity of semicrystalline polymers: Structure–property relations for high-density polyethylene,” Comput. Mater. Sci., vol. 39, no. 4, pp. 729–751, 2007.
   Web of Science ®Google Scholar
• A. D. Drozdov, A.-L. Høg Lejre, and J.d C. Christiansen, “Viscoelasticity, viscoplasticity, and creep failure of polypropylene/clay nanocomposites,” Compos. Sci. Technol., vol. 69, no. 15–16, pp. 2596–2603, 2009.
   Web of Science ®Google Scholar
• N. Brusselle-Dupend, D. Lai, X. Feaugas, M. Guigon, and M. Clavel, “Mechanical behavior of a semicrystalline polymer before necking. Part II: Modeling of uniaxial behavior,” Polym. Eng. Sci., vol. 43, no. 2, pp. 501–518, 2003.
   Web of Science ®Google Scholar
• D. Peric and W. Dettmer, “A computational model for generalized inelastic materials at finite strains combining elastic, viscoelastic and plastic material behavior,” Eng. Comput., vol. 20, no. 5/6, pp. 768–787, 2003.
   Google Scholar
• A. S. Khan, O. Lopez-Pamies, and R. Kazmi, “Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures,” Int. J. Plast., vol. 22, no. 4, pp. 581–601, 2006.
   Web of Science ®Google Scholar
• A. Krairi and I. Doghri, “A thermodynamically-based constitutive model for thermoplastic polymers coupling viscoelasticity, viscoplasticity and ductile damage,” Int. J. Plast., vol. 60, pp. 163–181, 2014. .
   Web of Science ®Google Scholar
• D. Garcia-Gonzalez, R. Zaera, and A. Arias, “A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: Application to PEEK under dynamic loading conditions,” Int. J. Plast., vol. 88, pp. 27–52, 2017.
   Web of Science ®Google Scholar
• H. Pouriayevali, S. Arabnejad, Y. B. Guo, and V. P. W. Shim, "A constitutive description of the rate-sensitive response of semi-crystalline polymers,” Int. J. Impact Eng., vol. 62, pp. 35–47, 2013.
   Web of Science ®Google Scholar
• G. Paulus and V. Schirm, “Impact behaviour of PELE projectiles perforating thin target plates,” Int. J. Impact Eng., vol. 33, no. 1–12, pp. 566–579, 2006.
   Web of Science ®Google Scholar
• J. Verreault, “Analytical and numerical description of the PELE fragmentation upon impact with thin target plates,” Int. J. Impact Eng., vol. 76, pp. 196–206, 2015.
   Web of Science ®Google Scholar
• Z. Fan, X. Ran, W. Tang, Y. Ke, and Z. Li, “The model to calculate the radial velocities of fragments after PELE penetrator perforating a thin plate,” Int. J. Impact Eng., vol. 95, pp. 12–16, 2016.
   Web of Science ®Google Scholar
• Z. Tang, “Optimum size of transversal isotropic specimen in dynamic testing using the split Hopkinson pressure bar,” Explo. Shock Waves, vol. 5, no. 2, pp. 1–10, 1985.
   Google Scholar
• G. F. Gao, Y. C. Li, and W. G. Liu, “Experimental technology of SHPB for porous hard and brittle materials,” Mech. Eng., vol. 33, no. 06, pp. 35–39, 2011.
   Google Scholar
• T. Z. Jiang, P. Xue, and H. S. U. Butt, “Pulse shaper design for dynamic testing of viscoelastic materials using polymeric SHPB,” Int. J. Impact Eng., vol. 79, pp. 45–52, 2015.
   Web of Science ®Google Scholar
• A. B. Shemirani, R. Naghdabadi, and M. J. Ashrafi, “Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus,” Constr. Build. Mater., vol. 125, pp. 326–336, 2016.
   Web of Science ®Google Scholar
• P. Yu, X. Yao, Q. Han, S. Zang, and Y. Gu, “A visco-elastoplastic constitutive model for large deformation response of polycarbonate over a wide range of strain rates and temperatures,” Polymer, vol. 55, no. 25, pp. 6577–6593, 2014.
   Web of Science ®Google Scholar
• L. L. Wang, S. Q. Shi, J. Y. Chen, and D. J. Huang, “Research and application of ZWT nonlinear thermal vscoelastic constitutive relation,” J. Ningbo Univ., vol. 12, no. 13, pp. 141–149, 2000.
   Google Scholar
• T. Jin, Yield Behavior and Macroscopic Phenomenological Constitutive of Semi-Crystalline Polymer. Taiyuan University of Technology, China national knowledge internet (CNKI) and Wanfang Date, 2016.
   Google Scholar
• J. Eibl, Concrete structures under impact and impulsive loading, CEB-Bulletin D’Information No. 187, CiteSeer (ResearchIndex), 1988, pp. 1–183.
   Google Scholar
• G. R. Johnson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, The Hague, 19–21 April, 1983, Netherlands, pp. 541–547.
   Google Scholar
• G. R. Cowper and P. S. Symonds, “Strain hardening and strain rate effect in the impact loading of cantilever beams,” Small Bus. Econ., vol. 31, no. 3, pp. 235–263, 1957.
   Google Scholar
• Y. U. Hai-Yan, “Comparative study on strain hardening models of thin metal sheet,” Forging Stamp. Technol., vol. 37, no. 5, pp. 1–6, 2012.
   Google Scholar
• Y. C. Li, Introduction of Tensor Analysis and Modern Continuum Mechanics, Hefei: China University of Science and Technology Press, 2016, p. 5.
   Google Scholar
• C. A. Mahieux and K. L. Reifsnider, “Property modeling across transition temperatures in polymers: A robust stiffness-temperature model," Polymer, vol. 42, no. 7, pp. 3281–3291, 2001.
   Web of Science ®Google Scholar
• S. Fu, Y. Wang, and Y. Wang, “Tension testing of polycarbonate at high strain rates,” Polym. Test., vol. 28, no. 7, pp. 724–729, 2009.
   Web of Science ®Google Scholar