Prediction models of creep crack initiation for different specimen geometry

References

• S. R. Holdsworth, Initiation and early growth of creep cracks from pre-existing defects, Mater. High. Temp., vol. 10, no. 2, pp. 127–137, 1992.
   Google Scholar
• P. Onck and E. van der Giessen, Growth of an initially sharp crack by grain boundary cavitation, J. Mech. Phys. Solids., vol. 47, no. 1, pp. 99–139, 1998.
   Web of Science ®Google Scholar
• C. M. Davies, Crack initiation and growth at elevated temperatures in engineering steels. Ph.D, Thesis, Department of Mechanical Engineering, Imperial College London, 2006.
   Google Scholar
• C. M. Davies, N. P. O’Dowd, K. M. Nikbin, and G. A. Webster, An analytical and computational study of crack initiation under transient creep conditions, Int. J. Solids Struct, vol. 44, no. 6, pp. 1823–1842, 2007.
   Web of Science ®Google Scholar
• B.-N. Nguyen, P. Onck, and E. Van der Giessen, Crack-tip constraint effects on creep fracture, Eng. Fract. Mech., vol. 65, no. 4, pp. 467–490, 2000.
   Web of Science ®Google Scholar
• L. Zhao, H. Jing, L. Xu, Y. Han, and J. Xiu, Evaluation of constraint effects on creep crack growth by experimental investigation and numerical simulation, Eng. Fract. Mech., vol. 96, pp. 251–266, 2012.
   Web of Science ®Google Scholar
• L. Zhao, L. Xu, Y. Han, and H. Jing, Quantifying the constraint effect induced by specimen geometry on creep crack growth behavior in P92 steel, Int. J. Mech. Sci., vol. 94–95, pp. 63–74, 2015.
   Web of Science ®Google Scholar
• L. Zhao, L. Xu, Y. Han, and H. Jing, Two-parameter characterization of constraint effect induced by specimen size on creep crack growth, Eng. Fract. Mech., vol. 143, pp. 121–137, 2015.
   Web of Science ®Google Scholar
• X. K. Zhu, S. K. Jang, and Y. F. Chen, A modification of J-Q theory and its applications, Int. J. Fract., vol. 111, no. 3, pp. 47–52, 2001.
   Web of Science ®Google Scholar
• L. Y. Xu, X. F. Zhang, L. Zhao, Y. D. Han, and H. Y. Jing, Quantifying the creep crack-tip constraint effects using a load-independent constraint parameter Q*, Int. J. Mech. Sci., vol. 119, pp. 320–332, 2016.
   Web of Science ®Google Scholar
• D. Q. Wu, H. Y. Jing, L. Y. Xu, L. Zhao, and Y. D. Han, Numerical analysis of the creep crack constraint effects and the creep crack initiation for pressurized pipelines with circumferential surface cracks, Adv. Eng. Softw., vol. 20, no. 2, pp. 1–12, 2017.
   Google Scholar
• G. Z. Wang, X. L. Liu, F. Z. Xuan, and S. T. Tu, Effect of constraint induced by crack depth on creep crack-tip stress field in C(T) specimens, Int. J. Solids Struct., vol. 47, no. 1, pp. 51–57, 2010.
   Web of Science ®Google Scholar
• G. Z. Wang, B. K. Li, F. Z. Xuan, and S. T. Tu, Numerical investigation on the creep crack-tip constraint induced by loading configuration of specimens, Eng. Fract. Mech., vol. 79, pp. 353–362, 2012.
   Web of Science ®Google Scholar
• P. J. Sun, G. Z. Wang, F. Z. Xuan, S. T. Tu, and Z. D. Wang, Quantitative characterization of creep constraint induced by crack depths in compact tension specimens, Eng. Fract. Mech., vol. 78, no. 4, pp. 653–665, 2011.
   Web of Science ®Google Scholar
• P. J. Sun, G. Z. Wang, F. Z. Xuan, S. T. Tu, and Z. D. Wang, Three-dimensional numerical analysis of out-of-plane creep crack-tip constraint in compact tension specimens, Int. J. Press. Vessels. Pip., vol. 96–97, pp. 78–89, 2012.
   Web of Science ®Google Scholar
• J. P. Tan, G. Z. Wang, S. T. Tu, and F. Z. Xuan, Load-independent creep constraint parameter and its application, Eng. Fract. Mech., vol. 116, pp. 41–57, 2014.
   Web of Science ®Google Scholar
• J. P. Tan, Creep life assessment of structures containing crack incorporation constraint effect. PhD Thesis, East China University of Science and Technology, Shanghai, 2014 [In Chinese].
   Google Scholar
• J. Z. He, G. Z. Wang, S. T. Tu, and F. Z. Xuan, Effect of constraint on creep crack initiation time in test specimens in ASTM-E1457 standard, Eng. Fract. Mech., vol. 176, pp. 61–73, 2017.
   Web of Science ®Google Scholar
• H. Quintero and A. Mehmanparast, Prediction of creep crack initiation behaviour in 316H stainless steel using stress dependent creep ductility, Int. J. Solids Struct., vol. 97–98, pp. 101–115, 2016.
   Web of Science ®Google Scholar
• M. Tan, N. J. C. Celard, K. M. Nikbin, and G. A. Webster, Comparison of creep crack initiation and growth in four steels tested in HIDA, Int. J. Press. Vessels. Pip., vol. 78, no. 11–12, pp. 737–747, 2001.
   Web of Science ®Google Scholar
• H. Kaguchi, F. Djavanroodi, K. M. Nikbin, and G. A. Webster, Prediction of transient effects during the early stages of creep crack growth, ed. K. T. Rie, Published in the proceedings of the DVM Conference, September, Berlin, 1994.
   Google Scholar
• L. Zhao, H. Jing, L. Xu, J. An, and G. Xiao, Numerical investigation of factors affecting creep damage accumulation in ASME P92 steel welded joint, Mater. Des., vol. 34, pp. 566–575, 2012.
   Web of Science ®Google Scholar
• ABAQUS. Version 6.14. 2014. Hibbitt, Karlsson & Sorensen, Inc.
   Google Scholar
• K. M. Nikbin, Justification for meso-scale modeling in quantifying constraint during creep crack growth, Mater. Sci. Eng. A, vol. 365, no. 1–2, pp. 107–113, 2004.
   Web of Science ®Google Scholar
• N. P. O’Dowd, M. N. Kamran, and F. R. Biglari, Creep crack initiation in a weld steel: effects of residual stress. 2005 ASME pressure vessels and piping division conference, July 17–21, Denver, Colorado, USA, 2005.
   Google Scholar
• M. Turski, P. J. Bouchard, A. Steuwer, and P. J. Withers, Residual stress driven creep cracking in AISI type 316 stainless steel, Acta. Mater., vol. 56, no. 14, pp. 3598–3612, 2008.
   Web of Science ®Google Scholar
• K. Bumjoon and L. Byeongsoo, Local creep evaluation of P92 steel weldment by small punch creep test, Acta. Mech. Solida. Sinica., vol. 21, no. 4, pp. 312–317, 2008.
   Web of Science ®Google Scholar
• H. Riedel and J. R. Rice, Tensile cracks in creeping solids. Proceedings of 12th Conference on Fracture Mechanics, ASTM STP 700. vol. 1. American Society for Testing and Materials, pp.112–130, St. Louis, 1980.
   Google Scholar
• W. Pavinich and R. Raj, Fracture at elevated temperature, Metalluric. Transact. A, vol. 8, no. 12, pp. 1917–1933, 1977.
   Web of Science ®Google Scholar
• M. Schütze, High temperature component life assessment, Mater. Corros., vol. 45, no. 11, pp. 633, 1994.
   Google Scholar
• P. Budden and R. Ainsworth, The effect of constraint on creep fracture assessments, Int. J. Fract., vol. 97, no. 1/4, pp. 237–247, 1999.
   Web of Science ®Google Scholar
• J. A. Joyce and R. E. Link, Application of two parameter elastic-plastic fracture mechanics to analysis of structures, Eng. Fract. Mech., vol. 57, no. 4, pp. 431–446, 1997.
   Web of Science ®Google Scholar
• ASTM E1457-13 Standard Test Method for Measurement of Creep Crack Growth Times in Metals. West Conshohocken, USA: ASTM International, pp. 1012–1035, 2013.
   Google Scholar
• A. D. Bettinson, N. P. O’Dowd, K. Nikbin, and G. A. Webster, Two parameter characterisation of crack tip fields under creep conditions, In: S. Murakami, N. Ohno (Eds.), IUTAM Symposium on Creep in Structures. Netherlands: Springer, pp. 95–104, 2001.
   Google Scholar