Modeling the residual strength and fatigue life of carbon fiber composites under constant amplitude loading

References

• S. K. Bhaumik, M. Sujata, and M. A. Venkataswamy, “Fatigue failure of aircraft components,” Eng. Fail. Anal., vol. 15, no. 6, pp. 675–694, 2008.
   Web of Science ®Google Scholar
• S. Findlay and N. Harrison, “Why aircraft fail,” Mater. Today, vol. 5, no. 11, pp. 18–25, 2002.
   Google Scholar
• K. R. Uleck, “A Hybrid Model for Fatigue life estimation of Polymer Matrix Composites,” Thesis, University of Maryland, 2006.
   Google Scholar
• N. L. Post, J. J. Lesko, and S. W. Case, “3 - Residual strength fatigue theories for composite materials A2 - Vassilopoulos, Anastasios P,” in Fatigue Life Prediction of Composites and Composite Structures, Eds. Woodhead Publishing, 2010.
   Google Scholar
• B. Liu, “Fatigue and damage tolerance analysis of Composite Laminates- Stiffness loss, Damage Modeling and Life Prediction,” PhD thesis, McGill University, 1992.
   Google Scholar
• T. Philippidis and V. Passipoularidis, “Residual strength after fatigue in composites: Theory vs. experiment,” Int. J. Fatigue, vol. 29, no. 12, pp. 2104–2116, 2007.
   Web of Science ®Google Scholar
• J. R. Schaff and B. D. Davidson, Life prediction methodology for composite structures. Part I—constant amplitude and Two-Stress level fatigue, J. Compos. Mater., vol. 31, no. 2, pp. 128–157, 1997.
   Web of Science ®Google Scholar
• A. P. Vassilopoulos and R. P. L. Nijssen, “9 - Fatigue life prediction of composite materials under realistic loading conditions (variable amplitude loading),” in Fatigue Life Prediction of Composites and Composite Structures. Woodhead Publishing, 2010, pp. 293–333.
   Google Scholar
• J. Degrieck and W. Van Paepegem, “Fatigue damage modeling of fibre-reinforced composite materials: review,” Appl. Mech. Rev., vol. 54, no. 4, pp. 279, 2001.
   Google Scholar
• J. Halpin, K. Jerina, and T. Johnson, “Characterization of composites for the purpose of reliability evaluation,” in Analysis of the Test Methods for High Modulus Fibers and Composites, J. Whitney, Ed. ASTM International, 1973, pp. 55–60.
   Google Scholar
• K. T. Kedward and P. W. R. Beaumont, “The treatment of fatigue and damage accumulation in composite design,” Int. J. Fatigue, vol. 14, no. 5, pp. 283–294, 1992.
   Web of Science ®Google Scholar
• S. M. Spearing and P. W. R. Beaumont, “Fatigue damage mechanics of composite materials. I: Experimental measurement of damage and post-fatigue properties,” Compos. Sci. Technol., vol. 44, no. 2, pp. 159–168, 1992.
   Web of Science ®Google Scholar
• S. M. Spearing and P. W. R. Beaumont, “Fatigue damage mechanics of composite materials part III: prediction of post-fatigue strength,” Compos. Sci. Technol., vol. 44, no. 4, pp. 299–307, 1992.
   Web of Science ®Google Scholar
• S. M. Spearing, P. W. R. Beaumont, and M. F. Ashby, “Fatigue damage mechanics of composite materials. II: a damage growth model,” Compos. Sci. Technol., vol. 44, no. 2, pp. 169–177, 1992.
   Web of Science ®Google Scholar
• L. Broutman and S. Sahu, “A new theory to predict cumulative fatigue damage in fiberglass reinforced plastics,” in Composite Materials: Testing and Design (Second Conference), H. Corten, Ed. ASTM International, 1972, pp. 170.
   Google Scholar
• J. N. Yang and M. D. Liu, “Residual strength degradation model and theory of periodic proof tests for graphite/epoxy laminates,” J. Compos. Mater., vol. 11, no. 2, pp. 176–203, 1977.
   Google Scholar
• J. N. Yang and D. L. Jones, “Effect of load sequence on the statistical fatigue of composites,” Aiaa J., vol. 18, no. 12, pp. 1525–1531, 1980.
   Google Scholar
• J. Yang and D. Jones, “Load sequence effects on the fatigue of unnotched composite materials.” in Fatigue of Fibrous Composite Materials, K. Lauraitis, Ed. ASTM International, 1981, pp. 213.
   Google Scholar
• J. Yang and R. Cole, “Fatigue of composite bolted joints under dual load levels,” Prog. Sci. Eng. Compos., pp. 333–340, 1982.
   Google Scholar
• T. Chiao, “Fatigue of graphite/epoxy [0/90/45/−45]s laminates under dual stress levels,” J. Compos. Technol. Res., vol. 4, no. 3, pp. 63, 1982.
   Google Scholar
• J. N. Yang and S. Du, “An exploratory study into the fatigue of composites under spectrum loading,” J. Compos. Mater., vol. 17, no. 6, pp. 511–526, 1983.
   Web of Science ®Google Scholar
• C. Kassapoglou, “Predicting the Structural Performance of Composite Structures Under Cycling Loading,” PhD thesis, Massachusetts Institute of Technology, Cambridge, MA, 2012.
   Google Scholar
• G. L. Rosa and A. Risitano, “Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components,” Int. J. Fatigue, vol. 22, no. 1, pp. 65–73, 2000.
   Web of Science ®Google Scholar
• J. F. Mandell, D. D. Samborsky, D. A. Agastra, and A. T. Sears. “DOE/MSU composite material fatigue database: Test methods, materials, and analysis,” Montana State University, United States, SAND–97-3002, Dec. 1997.
   Google Scholar
• L. Gornet, O. Wesphal, C. Burtin, J.-L. Bailleul, P. Rozycki, and L. Stainier, “Rapid determination of the high cycle fatigue limit curve of carbon fiber epoxy matrix composite laminates by thermography methodology: Tests and finite element simulations,” Procedia Eng., vol. 66, pp. 697–704, 2013.
   Google Scholar
• J. L. V. Coelho, and J. M. L. Reis, “Effects of strain rate and temperature on the mechanical properties of GFRP composites,” Tecnol. Eng. Térmica Therm. Eng. Ing, vol. 10, no. 1 and 2, pp. 03–06, 2011.
   Google Scholar
• I. M. Daniel, B. T. Werner, and J. S. Fenner, “Strain-rate-dependent failure criteria for composites,” Compos. Sci. Technol., vol. 71, no. 3, pp. 357–364, 2011.
   Web of Science ®Google Scholar
• K. Naresh, K. Shankar, B. S. Rao, and R. Velmurugan, “Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites,” Compos. Part B Eng., vol. 100, pp. 125–135, 2016.
   Web of Science ®Google Scholar
• T. G. Río, E. Barbero, R. Zaera, and C. Navarro, “Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar,” Compos. Sci. Technol., vol. 65, no. 1, pp. 61–71, 2005.
   Web of Science ®Google Scholar
• K. Naresh, K. Shankar, R. Velmurugan, and N. K. Gupta, “Statistical analysis of the tensile strength of GFRP, CFRP and hybrid composites,” Thin-Walled Struct., 2017.
   Web of Science ®Google Scholar
• M. V. Hosur, J. Alexander, U. K. Vaidya, S. Jeelani, and A. Mayer, “Studies on the off-axis high strain rate compression loading of satin weave carbon/epoxy composites,” Compos. Struct., vol. 63, no. 1, pp. 75–85, 2004.
   Web of Science ®Google Scholar
• A. Gilat, R. K. Goldberg, and G. D. Roberts, “Experimental study of strain-rate-dependent behavior of carbon/epoxy composite,” Compos. Sci. Technol., vol. 62, no. 10-11, pp. 1469–1476, 2002.
   Web of Science ®Google Scholar
• J. Kwon, J. Choi, H. Huh, and J. Lee, “Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates,” J. Compos. Mater., vol. 51, no. 22, pp. 3197–3210, 2017.
   Web of Science ®Google Scholar
• G. C. Jacob, J. M. Starbuck, J. F. Fellers, S. Simunovic, and R. G. Boeman, “Strain rate effects on the mechanical properties of polymer composite materials,” J. Appl. Polym. Sci., vol. 94, no. 1, pp. 296–301, 2004.
   Web of Science ®Google Scholar
• B. C. Ray and D. Rathore, “A review on mechanical behavior of FRP composites at different loading speeds,” Crit. Rev. Solid State Mater. Sci., vol. 40, no. 2, pp. 119–135, 2015.
   Web of Science ®Google Scholar
• ASTM D3039/D3039M-17, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials.” ASTM International, 2017.
   Google Scholar
• W. Zuluaga, “Effect of Fatigue Cycle Loading Amplitude Tension-Tension on Composite Laminated Plates with initial Delamination,” PhD thesis, California Polytechnic State University, 2013.
   Google Scholar
• A.-H. Imad, “The effect of loading frequency and loading level on the fatigue behavior of angle-ply carbon/PEEK thermoplastic composites.” Masters thesis, Concordia University, Thesis, Concordia University, 1997.
   Google Scholar
• B. Surowska, J. Bieniaś, and H. Dębski, “Fatigue of unidirectional carbon fiber reinforced epoxy composites.”
   Google Scholar
• ASTM D3479/D3479M-12. “Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials.” ASTM International, 2012.
   Google Scholar
• A. D'Amore, G. Caprino, P. Stupak, J. Zhou, and L. Nicolais, “Effect of stress ratio on the flexural fatigue behaviour of continuous strand mat reinforced plastics,” Sci. Eng. Compos. Mater., vol. 5, no. 1, pp. 1–8, 1996.
   Web of Science ®Google Scholar
• B. Harris, Fatigue in Composites: science and Technology of the Fatigue Response of Fibre-Reinforced Plastics. Woodhead Publishing, 2003.
   Google Scholar
• J. Montesano, Z. Fawaz, and H. Bougherara, “Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite,” Compos. Struct., vol. 97, pp. 76–83, 2013.
   Web of Science ®Google Scholar
• J. Montesano, M. Selezneva, M. Levesque, and Z. Fawaz, “Modeling fatigue damage evolution in polymer matrix composite structures and validation using in-situ digital image correlation,” Compos. Struct., vol. 125, no. Supplement C, pp. 354–361, 2015.
   Google Scholar
• Y. Feng, C. Gao, Y. He, T. An, C. Fan, and H. Zhang, “Investigation on tension–tension fatigue performances and reliability fatigue life of T700/MTM46 composite laminates,” Compos. Struct., vol. 136, pp. 64–74, 2016.
   Web of Science ®Google Scholar
• J. Tomblin and W. Seneviratne, “Determining the Fatigue Life of Composite Aircraft Structures Using Life and Load-Enhancement Factors,” Department of Aerospace Engineering National Institute for Aviation Research Wichita State University, DOT/FAA/AR-10/6, 2011.
   Google Scholar
• V. Crupi, G. Epasto, E. Guglielmino, and G. Risitano, “Thermographic method for very high cycle fatigue design in transportation engineering,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 229, no. 7, pp. 1260–1270, 2015.
   Web of Science ®Google Scholar
• L. G. Melin and L. Asp, “Effects of strain rate on transverse tension properties of a carbon/epoxy composite: studied by moiré photography,” Compos. Part Appl. Sci. Manuf., vol. 30, no. 3, pp. 305–316, 1999.
   Web of Science ®Google Scholar
• A. E. Armenàkas and C. A. Sciammarella, “Response of glass-fiber-reinforced epoxy specimens to high rates of tensile loading,” Exp. Mech., vol. 13, no. 10, pp. 433–440, 1973.
   Web of Science ®Google Scholar