Effect of shear span-to-depth ratio on mechanical performance and cracking behavior of high strength steel fiber-reinforced concrete beams without conventional reinforcement

References

• E. Mondo, “Shear capacity of steel fibre reinforced concrete beams without conventional shear reinforcement,” M.Sc. thesis, Royal Institute of Technology (KTH), Stockholm, Sweden, 2011.
   Google Scholar
• P. Anant, and C. D. Modhera, “Micro mechanical crack and deformations study of SFRC deep beams,” in 33rd Conference on Our World in Concrete and Structures, Singapore, 2008, pp. 25–27.
   Google Scholar
• F. J. Berg, “Shear strength of reinforced concrete beams without web reinforcement,” J. ACI., vol. 59, no. 11, pp. 1587–1599, 1962.
   Google Scholar
• P. M. Ferguson, “Some implications of recent diagonal tension tests,” J. ACI., vol. 28, no. 2, pp. 157–172, 1956.
   Google Scholar
• H. P. J. Taylor, “Shear strength of large beams,” J. Struct. Div. ASCE., vol. 98, no. 11, pp. 2473–2489, 1972.
   Google Scholar
• S. H. Cho, “Shear strength prediction by modified plasticity theory for short beams,” ACI Struct. J., vol. 100, no. 1, pp. 105–112, 2003.
   Web of Science ®Google Scholar
• T. Zsutty, “Shear strength prediction of separate categories of simple beams test,” ACI J., vol. 68, no. 2, pp. 138–143, 1971.
   Google Scholar
• ACI Committee 426R-74. “Shear strength of reinforced concrete members”. Proceedings, ASCE, Vol. 99, No. ST6, pp. 1148–1157, 1973.
   Google Scholar
• F. Leonhardt, and R. Walther, “Schubversuche an einfeldrigen Stahlbetonbalken mit und ohne Schubbewehrung,” DAfStb Heft no. 151, Berlin, 1962.
   Google Scholar
• G. N. J. Kani, “The basic facts concerning shear failure,” Proc. ACI. J., vol. 63, no. 7, pp. 675–692, 1966.
   Google Scholar
• R. Grebović, and Z. Radovanović, “Shear strength of high strength concrete beams loaded close to the support,” Procedia. Eng., vol. 117, pp. 492–499, 2015.
   Google Scholar
• N. M. Hawkins, D. A. Kuchma, R. F. Mast, M. L. Marsh, and K. H. Reineck, Simplified shear design of structural concrete members – Appendixes (2005) NCHRP, Web-Only Document 78.
   Google Scholar
• S. Amlan, “Analysis and design for shear and torsion”, Lecture Notes-Department of Civil Engineering Indian Institute of Technology Madras, 2011.
   Google Scholar
• Raju., “Review on shear behaviour of reinforced concrete beam without transverse reinforcement,” Int. J. Eng. Res. Appl., vol. 4, no. 4, 2014.
   Google Scholar
• A. Carpinteri, J. Ruiz Carmona, and G. Ventura, “Propagation of flexural and shear cracks through reinforced concrete beams by the bridged crack model,” Mag. Concr. Res., vol. 59, no. 10, pp. 743–756, 2007.
   Web of Science ®Google Scholar
• D. R. Sahoo, S. Bhagat, and T. C. V. Reddy, “Experimental study on shear-span to effective-depth ratio of steel fiber reinforced concrete T-beams,” Mater. Struct., vol. 49, no. 9, pp. 3815, 2016.
   Web of Science ®Google Scholar
• Y. K. Kwak, W. S. Kım, and J. Kım, “Shear strength of steel fibers – reinforced concrete beams without stirrups,” ACI. Struct. J., vol. 99, no. 4, pp. 530–538, 2002.
   Web of Science ®Google Scholar
• H. H. Dinh, G. J. Parra-Montesinos, and J. K. Wight, “Shear strength of steel fiber reinforced concrete beams without stirrup reinforcement,” ACI Struct. J., vol. 107, no. 5, pp. 597–606, 2010.
   Web of Science ®Google Scholar
• D. R. Sahoo, and N. Kumar, “Monotonic behaviour of large scale SFRC beams without stirrups,” Eng. Struct., vol. 92, pp. 46–54, 2015.
   Web of Science ®Google Scholar
• S. Y. Alam, J. Saliba, and A. Loukili, “Study of evolution of fracture process zone in concrete by simultaneous application of digital image correlation and acoustic emission,” VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, pp. 1–9, 2013.
   Google Scholar
• C. Astm, 1609. Standard Test Method for Flexural Performance of Fiber Reinforced Concrete. West Conshonocken, PA: American Society of Testing Material, 2007.
   Google Scholar
• JSCE SF-4, Standards For Tests Methods of Fiber Reinforced Concrete, Japan Concrete Institute, pp. 45–51, 1984.
   Google Scholar
• M. C. Nataraja, N. Dhang, and A. P. Gupta, “Toughness characterization of steel fiber reinforced concrete by JSCE approach,” Cement Concr. Res., vol. 30, no. 4, pp. 593–597, 2000.
   Web of Science ®Google Scholar
• A. E. Naaman, G. G. Namur, J. M. Alwan, and H. S. Najm, “Fiber pullout and bond slip. I: Analytical study,” J. Struct. Eng., ASCE, vol. 117, no. 9, pp. 2769–2790, 1991.
   Web of Science ®Google Scholar
• ACI Committee 544, Report on the Physical Properties and Durability of Fiber-Reinforced Concrete (ACI 544.5R-10). Farmington Hills, MI: American Concrete Institute, pp. 35, 2010.
   Google Scholar
• Z. Lin, and V. C. Li, “Crack bridging in fiber-reinforced cementitious composites with slip-hardening interfaces,” J. Mech. Phys. Solids, V, vol. 45, no. 5, pp. 763–787, 1997.
   Web of Science ®Google Scholar
• R. L. Jindal, “Shear and moment capacities of steel–fiber-reinforced-concrete beams,” in Fiber-reinforced-concrete, G. C. Hoff. ACISP-81, pp. 116, 1984.
   Google Scholar
• S. K. Kaushik, V. K. Gupta, and N. K. Tarafdar, “Behavior of fiber reinforced concrete beams shear,” in Proceedings of the International Symposium on Fiber-Reinforced-Concrete, Madras, India; 1987, pp. 1133–1149.
   Google Scholar
• Z. P. Bazant, and J. Kim, “Size effect on diagonal shear failure of beams without stirrups,” ACI Struct. J., vol. 3, no. 88, pp. 268–276, 1991.
   Google Scholar
• I. Sanal, “Effects of formwork dimensions on the mechanical performance of fiber-reinforced cement based materials”, M.Sc. Thesis, September, 2010.
   Google Scholar
• I. Sanal, and O. N. Zihnioglu, “To what extent does the fiber orientation affect mechanical performance?” Constr. Building Mater., vol. 44, pp. 671–681, 2013.
   Web of Science ®Google Scholar
• İ. Şanal, O. N. Zihnioğlu, and A. Hosseini, “Particle image velocimetry (PIV) to evaluate fresh and hardened state properties of self compacting fiber-reinforced cementitious composites (SC-FRCCs),” Constr. Build. Mater., vol. 78, pp. 450–463, 2015.
   Web of Science ®Google Scholar
• I. Sanal, O. N. Zihnioglu, and A. Hosseini, “Characterization of hardened state behavior of Self Compacting Fiber-Reinforced Cementitious Composites (SC-FRCC's) with different beam sizes and fiber types,” J. Comp. Part B: Eng., vol. 105, pp. 35–45, 2016.
   Web of Science ®Google Scholar
• I. Sanal, “Understanding global mechanical response of fiber reinforced cementitious composite beams from local fracture process,” Struct. Control Health Monitor., vol. 25, no. 8, 2018. DOI:10.1002/stc.2202.
   Google Scholar
• I. Sanal, and A. Hosseini, “Determination of mid-span deflection by means of crack opening in Steel Fiber-Reinforced Cementitious Composite (SFRCC) Beams,” Mech. Adv. Mater. Struc., 2018. DOI:10.1080/15376494.2018.1444230.
   Google Scholar
• E. Sideridis, and G. A. Papadopoulos, “Short‐beam and three‐point‐bending tests for the study of shear and flexural properties in unidirectional‐fiber‐reinforced epoxy composites,” J. Appl. Polym. Sci., vol. 93, no. 1, pp. 63–74, 2004.
   Web of Science ®Google Scholar