Dynamic behavior of carbon nanofiber-modified epoxy with the effect of polydopamine-coated interface

References

• H. Zhang, S. W. Gn, J. An, Y. Xiang, and J. L. Yang, “Impact behaviour of GLAREs with MWCNT modified epoxy resins,” Exp. Mech., vol. 54, no. 1, pp. 83–93, 2014.
   Web of Science ®Google Scholar
• J. Suhr, and N. A. Koratkar, “Energy dissipation in carbon nanotube composites: a review,” J. Mater. Sci., vol. 43, no. 13, pp. 4370–4382, 2008.
   Web of Science ®Google Scholar
• N. Domun, H. Hadavinia, T. Zhang, T. Sainsbury, G. H. Liaghat, and S. Vahid, “Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status,” Nanoscale, vol. 7, no. 23, pp. 10294–10329, 2015.
   PubMed Web of Science ®Google Scholar
• E. M. Soliman, M. P. Sheyka, and M. R. Taha, “Low-velocity impact of thin woven carbon fabric composites incorporating multi-walled carbon nanotubes,” Int. J. Impact Eng., vol. 47, pp. 39–47, 2012.
   Web of Science ®Google Scholar
• S. Gurusideswar, and R. Velmurugan, “Strain rate sensitivity of glass/epoxy composites with nanofillers,” Mater. Design, vol. 60, pp. 468–478, 2014.
   Web of Science ®Google Scholar
• Z. Shokrieh, M. Seifi, and M. M. Shokrieh, “Simulation of stiffness of randomly-distributed-graphene/epoxy nanocomposites using a combined finite element-micromechanics method,” Mech. Mater., vol. 115, pp. 16–21, 2017.
   Web of Science ®Google Scholar
• J. G. Lawrence, L. M. Berhan, and A. Nadarajah, “Elastic properties and morphology of individual carbon nanofibers,” ACS Nano, vol. 2, no. 6, pp. 1230–1236, 2008.
   PubMed Web of Science ®Google Scholar
• G. Tibbetts, M. Lake, K. Strong, and B. Rice, “A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites,” Composites Science and Technology, vol. 67, no. 7–8, pp. 1709–1718, 2007.
   Web of Science ®Google Scholar
• W. Liu et al., “A biomimetic approach to improve the dispersibility, interfacial interactions and toughening effects of carbon nanofibers in epoxy composites,” Compos. Part B: Eng., vol. 113, pp. 197–205, 2017.
   Web of Science ®Google Scholar
• M. J. Palmeri, K. W. Putz, and L. C. Brinson, “Sacrificial bonds in Stacked-Cup carbon nanofibers: biomimetic toughening mechanisms for composite systems,” ACS Nano, vol. 4, no. 7, pp. 9, 2010.
   Web of Science ®Google Scholar
• P. Wang, W. Liu, X. Zhang, X. Lu, and J. Yang, “Enhanced fracture toughness of carbon fabric/epoxy laminates with pristine and functionalized stacked-cup carbon nanofibers,” Eng. Fract. Mech., vol. 148, pp. 73–81, 2015.
   Web of Science ®Google Scholar
• P. Wang et al., “Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading,” Mater. Sci. Eng.: A, vol. 620, pp. 253–261, 2015.
   Web of Science ®Google Scholar
• T. Li et al., “Dynamic fracture of C/SiC composites under high strain-rate loading: microstructures and mechanisms,” Carbon, vol. 91, pp. 468–478, 2015.
   Web of Science ®Google Scholar
• W. Liu et al., “Toughening of epoxies by covalently anchoring triazole-functionalized stacked-cup carbon nanofibers,” Compos. Sci. Technol., vol. 85, pp. 1–9, 2013.
   Web of Science ®Google Scholar
• L. Ma et al., “Improving the interfacial properties of carbon fiber-reinforced epoxy composites by grafting of branched polyethyleneimine on carbon fiber surface in supercritical methanol,” Compos. Sci. Technol., vol. 114, pp. 64–71, 2015.
   Web of Science ®Google Scholar
• H. Lee, B. P. Lee, and P. B. Messersmith, “A reversible wet/dry adhesive inspired by mussels and geckos,” Nature, vol. 448, no. 7151, pp. 338–341, 2007.
   PubMed Web of Science ®Google Scholar
• H. Lee, S. M. Dellatore, W. M. Miller, and P. B. Messersmith, “Mussel-inspired surface chemistry for multifunctional coatings,” Science, vol. 318, pp. 426–430, 2007.
   PubMed Web of Science ®Google Scholar
• S. Chen, Y. Cao, and J. Feng, “Polydopamine as an efficient and robust platform to functionalize carbon fiber for high-performance polymer composites,” ACS Appl. Mater. Interf., vol. 6, no. 1, pp. 349–356, 2014.
   PubMed Web of Science ®Google Scholar
• Y. L. Lu, J. Ma, T. Y. Xu, W. C. Wang, Y. Jiang, and L. Q. Zhang, “Preparation and properties of natural rubber reinforced with polydopamine-coating modified carbon nanotubes,” Express Polym. Lett., vol. 11, no. 1, pp. 21–34, 2017.
   Web of Science ®Google Scholar
• J. H. Ryu, P. B. Messersmith, and H. Lee, “Polydopamine surface chemistry: a decade of discovery,” ACS Appl. Mater. Interf., vol. 10, no. 9, pp. 7523–7540, 2018.
   PubMed Web of Science ®Google Scholar
• J. Yan et al., “Polydopamine-derived porous carbon fiber/cobalt composites for efficient oxygen reduction reactions,” J. Mater. Chem. A, vol. 3, no. 46, pp. 23299–23306, 2015.
   Web of Science ®Google Scholar
• L. Yang et al., “Polydopamine-coated graphene as multifunctional nanofillers in polyurethane,” RSC Adv., vol. 3, no. 18, pp. 6377, 2013.
   Web of Science ®Google Scholar
• L. Yang et al., “A biomimetic approach to enhancing interfacial interactions: polydopamine-coated clay as reinforcement for epoxy resin,” ACS Appl. Mater. Interf., vol. 3, no. 8, pp. 3026–3032, 2011.
   PubMed Web of Science ®Google Scholar
• S. L. Phua et al., “Simultaneous enhancements of UV resistance and mechanical properties of polypropylene by incorporation of dopamine-modified clay,” ACS Appl. Mater. Interf., vol. 5, no. 4, pp. 1302–1309, 2013.
   PubMed Web of Science ®Google Scholar
• P. Wang et al., “Tunable crack propagation behavior in carbon fiber reinforced plastic laminates with polydopamine and graphene oxide treated fibers,” Mater. Design, vol. 113, pp. 68–75, 2017.
   Web of Science ®Google Scholar
• W. Chen, and B. Song, Split Hopkinson (Kolsky) Bar: Design, Testing and Applications. New York: Springer, 2011.
   Google Scholar
• Y. Chen, Y. B. Guo, M. Gupta, and V. P. W. Shim, “A study of the dynamic compressive response of AZ31/Al2O3 nanocomposites and the influence of nanoparticles,” Int. J. Impact Eng., vol. 89, pp. 114–123, 2016.
   Web of Science ®Google Scholar
• T. Gómez-del Río, and J. Rodríguez, “Compression yielding of epoxy: Strain rate and temperature effect,” Mater. Design, vol. 35, pp. 369–373, 2012.
   Web of Science ®Google Scholar
• A. Dutta, A. Vanderklok, and S. A. Tekalur, “High strain rate mechanical behavior of seashell-mimetic composites: Analytical model formulation and validation,” Mech. Mater., vol. 55, pp. 102–111, 2012.
   Web of Science ®Google Scholar
• T. Suo et al., “Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures,” Carbon, vol. 62, pp. 481–492, 2013.
   Web of Science ®Google Scholar
• J. Jiang, J-s Xu, Z-s Zhang, and X. Chen, “Rate-dependent compressive behavior of EPDM insulation: Experimental and constitutive analysis,” Mech. Mater., vol. 96, pp. 30–38, 2016.
   Web of Science ®Google Scholar
• V. Evora, and A. Shukla, “Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites,” Mater. Sci. Eng. A, vol. 361, no. 1-2, pp. 358–366, 2003.
   Web of Science ®Google Scholar
• Y. Guo, and Y. Li, “Quasi-static/dynamic response of SiO2–epoxy nanocomposites,” Mater. Sci. Eng: A, vol. 458, no. 1-2, pp. 330–335, 2007.
   Web of Science ®Google Scholar
• E. Özden-Yenigün, K. Bilge, E. Sünbüloğlu, E. Bozdağ, and M. Papila, “High strain rate response of nanofiber interlayered structural composites,” Compos. Struct., vol. 168, pp. 47–55, 2017.
   Web of Science ®Google Scholar
• P. Jindal et al., “High strain rate behavior of multi-walled carbon nanotubes–polycarbonate composites,” Compos. Part B: Eng., vol. 45, no. 1, pp. 417–422, 2013.
   Web of Science ®Google Scholar
• X. Zhang et al., “The effect of strain rate and filler volume fraction on the mechanical properties of hollow glass microsphere modified polymer,” Compos. Part B: Eng. 101(Suppl. C), vol. 101, pp. 53–63, 2016.
   Web of Science ®Google Scholar
• A. Jumahat, C. Soutis, F. R. Jones, and A. Hodzic, “Effect of silica nanoparticles on compressive properties of an epoxy polymer,” J. Mater. Sci., vol. 45, no. 21, pp. 5973–5983, 2010.
   Web of Science ®Google Scholar
• L. C. A. van Breemen, T. A. P. Engels, E. T. J. Klompen, D. J. A. Senden, and L. E. Govaert, “Rate- and temperature-dependent strain softening in solid polymers,” J. Polym. Sci. Part B: Polym. Phys., vol. 50, no. 24, pp. 1757–1771, 2012.
   Web of Science ®Google Scholar
• K. Chen, and K. S. Schweizer, “Theory of yielding, strain softening, and steady plastic flow in polymer glasses under constant strain rate deformation,” Macromolecules, vol. 44, no. 10, pp. 3988–4000, 2011.
   Web of Science ®Google Scholar
• L. E. Govaert, P. H. M. Timmermans, and W. A. M. Brekelmans, “The influence of intrinsic strain softening on strain localization in polycarbonate: Modeling and experimental validation,” J. Eng. Mater. Technol., vol. 122, no. 2, pp. 177–185, 2000.
   Web of Science ®Google Scholar
• M. A. Meyers, Dynamic Behavior of Materials. New York: Wiley, 1994.
   Google Scholar
• P. Wang, S. Xu, and S. Hu, “Experimental and numerical study of the effect of micro-structure on the rate-sensitivity of cellular foam,” Mech. Adv. Mater. Struct., vol. 23, no. 8, pp. 888–895, 2016.
   Web of Science ®Google Scholar
• L. P. Chen, A. F. Yee, and E. J. Moskala, “The molecular basis for the relationship between the secondary relaxation and mechanical properties of a series of polyester copolymer glasses,” Macromolecules, vol. 32, pp. 5944–5955, 1999.
   Web of Science ®Google Scholar
• P. Wang et al., “Strengthening and failure mechanisms of individual carbon nanotube fibers under dynamic tensile loading,” Carbon, vol. 102, pp. 18–31, 2016.
   Web of Science ®Google Scholar
• Z. H. Stachurski, “Deformation mechanisms and yield strength in amorphous polymers,” Prog. Polym. Sci, vol. 22, pp. 68, 1997.
   Web of Science ®Google Scholar
• A. D. Mulliken, and M. C. Boyce, “Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates,” Int. J. Solids Struct., vol. 43, no. 5, pp. 1331–1356, 2006.
   Web of Science ®Google Scholar
• R. Kapoor, and S. Nemat-Nasser, “Determination of temperature rise during high strain rate deformation,” Mech. Mater., vol. 27, no. 1, pp. 1–12, 1998.
   Web of Science ®Google Scholar
• H. Koerber, J. Xavier, and P. P. Camanho, “High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation,” Mech. Mater., vol. 42, no. 11, pp. 1004–1019, 2010.
   Web of Science ®Google Scholar
• S.-H. Jang, S. Kawashima, and H. Yin, “Influence of carbon nanotube clustering on mechanical and electrical properties of cement pastes,” Materials, vol. 9, no. 4, pp. 220(1–11), 2016.
   Web of Science ®Google Scholar
• P. Barai, and G. J. Weng, “A theory of plasticity for carbon nanotube reinforced composites,” Int. J. Plasticity, vol. 27, no. 4, pp. 539–559, 2011.
   Web of Science ®Google Scholar
• P. Wang et al., “Energy absorption mechanisms of modified double-aluminum layers under low-velocity impact,” Int. J. Appl. Mech., vol. 07, no. 06, pp. 1550086, 2015.
   Google Scholar
• H. Cai, Z. H. Cheng, H. H. Zhu, and D. L. Zuo, “Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser,” Appl. Surf. Sci., vol. 252, no. 5, pp. 1685–1692, 2005.
   Web of Science ®Google Scholar