References
- J. Barth, Fabrication of complex composite structures using advanced fiber placement technology, International SAMPE Symposium and Exhibition, 35th, Anaheim, CA, 1990, pp. 710–720.
- M.W. Hyer and H.H. Lee, The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular hole, Compos. Struct., vol. 18, no. 3, pp. 239–261, 1991. DOI: https://doi.org/10.1016/0263-8223(91)90035-W.
- Z. Wu, G. Raju, and P.M. Weaver, Post buckling analysis of variable angle tow composite plates, Int. J. Solids Struct., vol. 50, no. 10, pp. 1770–1780, 2013. DOI: https://doi.org/10.1016/j.ijsolstr.2013.02.001.
- Z. Wu, P.M. Weaver, and G. Raju, Post buckling optimisation of variable angle tow composite plates, Compos. Struct., vol. 103, pp. 34–42, 2013. DOI: https://doi.org/10.1016/j.compstruct.2013.03.004.
- Z. Wu, P.M. Weaver, G. Raju, and B.C. Kim, Buckling analysis and optimisation of variable angle tow composite plates, Thin Walled Struct., vol. 60, pp. 163–172, 2012. DOI: https://doi.org/10.1016/j.tws.2012.07.008.
- B.H. Coburn, Z. Wu, and P.M. Weaver, Buckling analysis of stiffened variable angle tow panels, Compos. Struct., vol. 111, pp. 259–270, 2014. DOI: https://doi.org/10.1016/j.compstruct.2013.12.029.
- F.V. Alfred and T. Christopher, Generation of crack growth resistance curve from ENF specimens made of Glass/Epoxy: An experimental study, Appl. Mech. Mater., vol. 787, pp. 335–339, 2015. DOI: https://doi.org/10.4028/www.scientific.net/AMM.787.335.
- A.B.D. Morais, J.F. Silva, A.T. Marques, and P.T.D. Castro, Mode II interlaminar fracture of filament wound angle-ply specimens, Appl. Compos. Mater., vol. 9, no. 2, pp. 117–129, 2002. DOI: https://doi.org/10.1023/A:1013898312796.
- F. Ozdil and L.A. Carlsson, Beam analysis of angle-ply laminate mixed-mode bending specimens, Compos. Sci. Technol., vol. 59, no. 6, pp. 937–945, 1999. DOI: https://doi.org/10.1016/S0266-3538(98)00128-6.
- C. Hwu, C.J. Kao, and L.E. Chang, Delamination fracture criteria for composite laminates, J. Compos. Mater., vol. 29, no. 15, pp. 1962–1987, 1995. DOI: https://doi.org/10.1177/002199839502901502.
- J. Andersons and M. König, Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction, Compos. Sci. Technol., vol. 64, no. 13-14, pp. 2139–2152, 2004. DOI: https://doi.org/10.1016/j.compscitech.2004.03.007.
- H. Miyagawa, C. Sato, and K. Ikegami, Effect of fiber orientation on Mode I fracture toughness of CFRP, J. Appl. Polym. Sci., vol. 115, no. 6, pp. 3295–3302, 2010. DOI: https://doi.org/10.1002/app.30233.
- M.M. Shokrieh, R.M. Heidari, and M.R. Ayatollahi, Calculation of GI for a multidirectional composite double cantilever beam on two-parametric elastic foundation, Aerosp. Sci. Technol., vol. 15, no. 7, pp. 534–543, 2011. DOI: https://doi.org/10.1016/j.ast.2010.10.001.
- P. Davies, Summary of results from the second VAMAS mode II round robin test exercise using the 4ENF specimen. IFREMER Report, 1999.
- Y.B. Shi, D. Hull, and J.N. Price, Mode II fracture of +θ/−θ angled laminate interfaces, Compos. Sci. Technol., vol. 47, no. 2, pp. 173–184, 1993. DOI: https://doi.org/10.1016/0266-3538(93)90045-I.
- H. Chai, Interlaminar shear fracture of laminated composites, Int. J. Fract., vol. 43, no. 2, pp. 117–131, 1990. DOI: https://doi.org/10.1007/BF00036181.
- J.J. Polaha, B.D. Davidson, R.C. Hudson, and A. Pieracci, Effects of mode ratio, ply orientation and precracking on the delamination toughness of a laminated composite, J. Reinf. Plast. Compos., vol. 15, no. 2, pp. 141–173, 1996. DOI: https://doi.org/10.1177/073168449601500202.
- G. Marom, I. Roman, H. Harel, M. Rosensaft, S. Kenig, and A. Moshonov, The strain energy release rate of delamination in fabric-reinforced composites, Int. J. Adhes. Adhes., vol. 8, no. 2, pp. 85–91, 1988. DOI: https://doi.org/10.1016/0143-7496(88)90028-0.
- J. Tao and C.T. Sun, Influence of ply orientation on delamination in composite laminates, J. Compos. Mater., vol. 32, no. 21, pp. 1933–1947, 1998. DOI: https://doi.org/10.1177/002199839803202103.
- H. Miyagawa, C. Sato, and K. Ikegami, Interlaminar fracture toughness of CFRP in Mode I and Mode II determined by Raman spectroscopy, Compos. Part A Appl. Sci. Manuf., vol. 32, no. 3-4, pp. 477–486, 2001. DOI: https://doi.org/10.1016/S1359-835X(00)00104-4.
- F.G.A. Silva, et al., Fracture characterization of human cortical bone under mode II loading using the end-notched flexure test, Med. Biol. Eng. Comput., vol. 55, no. 8, pp. 1249–1260, 2017. DOI: https://doi.org/10.1007/s11517-016-1586-6.
- J. Xavier, M. Oliveira, J.J.L. Morais, and M. F. S. F. D. Moura, Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation, Constr. Build. Mater., vol. 71, pp. 109–115, 2014. DOI: https://doi.org/10.1016/j.conbuildmat.2014.08.021.
- E. Triki, B. Zouari, and F. Dammak, Dependence of the interlaminar fracture toughness of E-Glass/polyester woven fabric composites laminates on ply orientation, Eng. Fract. Mech., vol. 159, pp. 63–78, 2016. DOI: https://doi.org/10.1016/j.engfracmech.2016.03.025.
- ASTM. Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, 14th ed., ASTM International, West Conshohocken, PA, 2014.
- M.S. Bin Mohamed Rehan, J. Rousseau, S. Fontaine, and X.J. Gong, Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates, Compos. Struct., vol. 161, pp. 1–7, 2017. DOI: https://doi.org/10.1016/j.compstruct.2016.11.036.
- S. Yazdani, W.J.H. Rust, and P. Wriggers, Delamination growth in composite laminates of variable stiffness, Int. J. Numer. Meth. Eng., vol. 108, no. 11, pp. 1406–1424, 2016. DOI: https://doi.org/10.1002/nme.5264.
- Z. Gurdal, B.F. Tatting, and C.K. Wu, Variable stiffness composite panels: Effects of stiffness variation on the in-plane and buckling response, Compos. Part A Appl. Sci. Manuf., vol. 39, no. 5, pp. 911–922, 2008. DOI: https://doi.org/10.1016/j.compositesa.2007.11.015.
- B.R.K. Blackman, A.J. Brunner, and J.G. Williams, Mode II fracture testing of composites: A new look at an old problem, Eng. Fract. Mech., vol. 73, no. 16, pp. 2443–2455, 2006. DOI: https://doi.org/10.1016/j.engfracmech.2006.05.022.
- K.N. Anyfantis and N.G. Tsouvalis, Experimental and numerical investigation of Mode II fracture in fibrous reinforced composites, J. Reinf. Plast. Compos., vol. 30, no. 6, pp. 473–487, 2011. DOI: https://doi.org/10.1177/0731684410397682.
- M. Bader, I. Hamerton, J. Hay, M. Kemp, and S. Winchester, Double cantilever beam testing of repaired carbon fibre composites, Compos. Part A Appl. Sci. Manuf., vol. 31, no. 6, pp. 603–608, 2000. DOI: https://doi.org/10.1016/S1359-835X(99)00095-0.
- F. Ducept, P. Davies, and D. Gamby, Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint, Int. J. Adhes. Adhes., vol. 20, no. 3, pp. 233–244, 2000. DOI: https://doi.org/10.1016/S0143-7496(99)00048-2.
- R. Campilho, Repair of Composite and Wood Structures, Instituto Superior de Engenharia do Porto, Portugal, 2009.
- M.D. Moura, R. Campilho, and J.P.M. Gonçalves, Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading, Compos. Sci. Technol., vol. 68, no. 10-11, pp. 2224–2230, 2008. DOI: https://doi.org/10.1016/j.compscitech.2008.04.003.
- M.F. Kanninen and C.H. Popelar, Advanced Fracture Mechanics, Oxford University Press, America, vol. 4, no. 1998, pp. 555, 1985.
- D. Silva, L.F. Martins, and A. Öchsner, Modeling of Adhesively Bonded Joints, Springer, Berlin, 2008.
- M.D. Moura, R. Campilho, and J.P.M. Gonçalves, Pure mode II fracture characterization of composite bonded joints, Int. J. Solids Struct., vol. 46, no. 6, pp. 1589–1595, 2009. DOI: https://doi.org/10.1016/j.ijsolstr.2008.12.001.
- D. Saldanha, et al., Mechanical characterization of a high elongation and high toughness epoxy adhesive, Int. J. Adhes. Adhes., vol. 47, pp. 91–98, 2013. DOI: https://doi.org/10.1016/j.ijadhadh.2013.08.001.
- Y. Wang and J.G. Williams, Corrections for mode II fracture toughness specimens of composites materials, Compos. Sci. Technol., vol. 43, no. 3, pp. 251–256, 1992. DOI: https://doi.org/10.1016/0266-3538(92)90096-L.
- R. Fernandes, J. Chousal, M.D. Moura, and J. Xavier, Determination of cohesive laws of composite bonded joints under mode II loading, Compos. Part B Eng., vol. 52, pp. 269–274, 2013. DOI: https://doi.org/10.1016/j.compositesb.2013.04.007.
- G. Dias, M.D. Moura, J. Chousal, and J. Xavier, Cohesive laws of composite bonded joints under mode I loading, Compos. Struct., vol. 106, pp. 646–652, 2013. DOI: https://doi.org/10.1016/j.compstruct.2013.07.027.
- M.D. Moura, J.P.M. Gonçalves, and A.G. Magalhães, A straightforward method to obtain the cohesive laws of bonded joints under mode I loading, Int. J. Adhes. Adhes., vol. 39, pp. 54–59, 2012. DOI: https://doi.org/10.1016/j.ijadhadh.2012.07.008.
- M.D. Moura, J. Gonçalves, J. Chousal, and R. Campilho, Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints, Int. J. Adhes. Adhes., vol. 28, no. 8, pp. 419–426, 2008. DOI: https://doi.org/10.1016/j.ijadhadh.2008.04.004.
- F.G.A. Silva, J.J.L. Morais, N. Dourado, J. Xavier, F.A.M. Pereira, and M. F. S. F. D. Moura, Determination of cohesive laws in wood bonded joints under mode II loading using the ENF test, Int. J. Adhes. Adhes., vol. 51, pp. 54–61, 2014. DOI: https://doi.org/10.1016/j.ijadhadh.2014.02.007.
- M.D. Banea, L.F.M. Silva, and R. Campilho, Effect of temperature on tensile strength and mode I fracture toughness of a high temperature epoxy adhesive, J. Adhes. Sci. Technol., vol. 26, no. 7, pp. 939–953, 2012. DOI: https://doi.org/10.1163/016942411X580144.
- J.J.M. Machado, E.A.S. Marques, R. D. S. G. Campilho, and L. F. M. D. Silva, Mode-II fracture toughness of CFRP as a function of temperature and strain rate, Compos. Part B Eng., vol. 114, pp. 311–318, 2017. DOI: https://doi.org/10.1016/j.compositesb.2017.02.013.
- X.H. Wang and W.X. Yao, Progress in research on FEA models of adhesively bonded composite joints, Adv. Mech., vol. 42, no. 5, pp. 562–571, 2012.
- G.I. Barenblatt, The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks, J. Appl. Math. Mech., vol. 23, no. 3, pp. 434–444, 1959. DOI: https://doi.org/10.1016/0021-8928(59)90157-1.
- G.I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture. In: Advances in Applied Mechanics, Moscow State University, Moscow, vol. 7, pp. 55–129, 1962.
- L. F. M. D. Silva and R. D. S. G. Campilho, Advances in numerical modelling of adhesive joints. In: Advances in Numerical Modeling of Adhesive Joints, Springer, Berlin, 2012, pp. 1–93.
- L. F. M. D. Silva, P. J. C. D. Neves, R.D. Adams, and J.K. Spelt, Analytical models of adhesively bonded joints—Part I: Literature survey, Int. J. Adhes. Adhes., vol. 29, no. 3, pp. 319–330, 2009. DOI: https://doi.org/10.1016/j.ijadhadh.2008.06.005.
- P.W. Harper and S.R. Hallett, Cohesive zone length in numerical simulations of composite delamination, Eng. Fract. Mech., vol. 75, no. 16, pp. 4774–4792, 2008. DOI: https://doi.org/10.1016/j.engfracmech.2008.06.004.