References
- Y. Wang, Y. Gao, Y. Li, W. Zhai, L. Sun, and C. Zhang, Review of preparation and application of copper–steel bimetal composites, Emerg. Mater. Res., vol. 8, no. 4, pp. 538–551, 2019. DOI: https://doi.org/10.1680/jemmr.17.00008.
- B. Liu, J. Wei, M. Yang, F. Yin, and K. Xu, Effect of heat treatment on the mechanical properties of copper clad steel plates, Vacuum, vol. 154, pp. 250–258, 2018. DOI: https://doi.org/10.1016/j.vacuum.2018.05.022.
- K. Al-Ghamdi, G. Hussain, and R. Hashemi, SPIF of Cu/Steel composite sheet: Effect of heat treatment on bond force and formability, Mater. Manuf. Processes., vol. 31, no. 6, pp. 758–763, 2016. DOI: https://doi.org/10.1080/10426914.2015.1048363.
- H. Zhang, K.X. Jiao, J.L. Zhang, and J. Liu, Microstructure and mechanical properties investigations of copper-steel composite fabricated by explosive welding, Mater. Sci. Eng. A., vol. 731, pp. 278–287, 2018. DOI: https://doi.org/10.1016/j.msea.2018.06.051.
- B. Fei, M. Fei, and Z. Chen, High electric conduction property of composite copper-clad steel wire, IEEE Trans. Electromagn. Compat., vol. 41, pp. 196–201, 1999.
- Q.M. Wu, D.Q. Wang, and Y. Gao, Effects of processing technic on grain size of copper clad steel wire, Adv. Mater. Res., vol. 567, pp. 116–122, 2012. DOI: https://doi.org/10.4028/www.scientific.net/AMR.567.116.
- T. Sasaki, M. Barkey, G. Thompson, Y. Syarif, and D. Fox, Microstructural evolution of copper clad steel bimetallic wire, Mater. Sci. Eng. A., vol. 528, no. 6, pp. 2974–2981, 2011. DOI: https://doi.org/10.1016/j.msea.2010.12.032.
- H. Zhang, K.X. Jiao, J.L. Zhang, and J. Liu, Experimental and numerical investigations of interface characteristics of copper/steel composite prepared by explosive welding, Mater. Des., vol. 154, pp. 140–152, 2018. DOI: https://doi.org/10.1016/j.matdes.2018.05.027.
- G. Eduful and K.J. Atanga, Conductivity and selection of copper clad steel wires for grounding applications, ICPESE 2017: International Conference on Power and Energy Systems Engineering, June 28–29, 2017, London, United Kingdom.
- H. Nagasawa, T. Kohida, S. Aoki, and S. Katayama, Study on application of copper clad steel wire to contact wire, Railway Tech. Res. Inst. Quart. Rep., vol. 33, pp. 98–105, 1992.
- H.B. McMeal, The History of Copper Clad Wire, in: Telephony, Chicago, IL; New York, NY: Telephone Publishing Corporation, 1911. 60 (17).
- F. He, L.m. Liu, Y. Zhong, Y.f. He, and Y.q. Su, Copper-clad steel wire and its producing technology, Surf. Technol., 2007.
- Q.M. Wu, D.Q. Wang, and Y. Gao, Preparation methods of copper-steel composite wire, Adv Mater. Res., vol. 569, pp. 223–228, 2012. DOI: https://doi.org/10.4028/www.scientific.net/AMR.569.223.
- Y. Zhu, J. Chen, and H. Liu, Research progress of copper clad steel bimetallic wire and preparation methods, Mater. Res. Appl., vol. 4, pp. 2, 2015.
- A. Eivani and A.K. Taheri, A new method for producing bimetallic rods, Mater. Lett., vol. 61, no. 19-20, pp. 4110–4113, 2007. DOI: https://doi.org/10.1016/j.matlet.2007.01.046.
- Z. Shen, Y. Chen, M. Haghshenas, T. Nguyen, J. Galloway, and A. Gerlich, Interfacial microstructure and properties of copper clad steel produced using friction stir welding versus gas metal arc welding, Mater. Charact., vol. 104, pp. 1–9, 2015. DOI: https://doi.org/10.1016/j.matchar.2015.02.022.
- Y. Qi, R. Lapovok, and Y. Estrin, Microstructure and electrical conductivity of aluminium/steel bimetallic rods processed by severe plastic deformation, J. Mater. Sci., vol. 51, no. 14, pp. 6860–6875, 2016. DOI: https://doi.org/10.1007/s10853-016-9973-9.
- A.E. Medvedev, R. Lapovok, E. Koch, H.W. Höppel, and M. Göken, Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure, Mater. Des., vol. 146, pp. 142–151, 2018. DOI: https://doi.org/10.1016/j.matdes.2018.03.021.
- R. Lapovok, M. Dubrovsky, A. Kosinova, and G. Raab, Effect of severe plastic deformation on the conductivity and strength of copper-clad aluminium conductors, Metals, vol. 9, no. 9, pp. 960, 2019. DOI: https://doi.org/10.3390/met9090960.
- K. Wu, H. Chang, E. Maawad, W. Gan, H. Brokmeier, and M. Zheng, Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB), Mater. Sci. Eng. A., vol. 527, no. 13-14, pp. 3073–3078, 2010. DOI: https://doi.org/10.1016/j.msea.2010.02.001.
- F. Kümmel, M. Kreuz, T. Hausöl, H. Höppel, and M. Göken, Microstructure and mechanical properties of accumulative roll-bonded AA1050A/AA5005 laminated metal composites, Metals, vol. 6, no. 3, pp. 56, 2016. DOI: https://doi.org/10.3390/met6030056.
- J. Romberg, et al., Ti/Al multi-layered sheets: accumulative roll bonding (part A), Metals, vol. 6, no. 2, pp. 30, 2016. DOI: https://doi.org/10.3390/met6020030.
- R. Lapovok, H.P. Ng, D. Tomus, and Y. Estrin, Bimetallic copper–aluminium tube by severe plastic deformation, Scr. Mater., vol. 66, no. 12, pp. 1081–1084, 2012. DOI: https://doi.org/10.1016/j.scriptamat.2012.03.004.
- K. Edalati, S. Lee, and Z. Horita, Continuous high-pressure torsion using wires, J. Mater. Sci., vol. 47, no. 1, pp. 473–478, 2012. DOI: https://doi.org/10.1007/s10853-011-5822-z.
- R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y. Zhu, Producing bulk ultrafine-grained materials by severe plastic deformation: Ten years later, JOM, vol. 68, no. 4, pp. 1216–1226, 2016. DOI: https://doi.org/10.1007/s11837-016-1820-6.
- A. Mendes, I. Timokhina, A. Molotnikov, P.D. Hodgson, and R. Lapovok, Role of shear in interface formation of aluminium-steel multilayered composite sheets, Mater. Sci. Eng. A., vol. 705, pp. 142–152, 2017. DOI: https://doi.org/10.1016/j.msea.2017.08.025.
- M. Eizadjou, A.K. Talachi, H.D. Manesh, H.S. Shahabi, and K. Janghorban, Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process, Compos. Sci. Technol., vol. 68, no. 9, pp. 2003–2009, 2008. DOI: https://doi.org/10.1016/j.compscitech.2008.02.029.
- R. Stanislav, N. Sergey, K. Vladimir, M. Alexey, K. Alexander, and U. Kseniya, Structure and mechanical properties of a hybrid material with copper matrix and steel fibers after ECAP, Mater. Res. Express., vol. 4, no. 12, pp. 125011, 2017. DOI: https://doi.org/10.1088/2053-1591/aa9c25.
- B.-W. Li, H.-P. Zhao, Q.-H. Qin, X.-Q. Feng, and S.-W. Yu, Numerical study on the effects of hierarchical wavy interface morphology on fracture toughness, Comput. Mater. Sci., vol. 57, pp. 14–22, 2012. DOI: https://doi.org/10.1016/j.commatsci.2011.01.032.
- J. Cui, G. Sun, G. Li, Z. Xu, and P.K. Chu, Specific wave interface and its formation during magnetic pulse welding, Appl. Phys. Lett., vol. 105, no. 22, pp. 221901, 2014. DOI: https://doi.org/10.1063/1.4903044.
- W. Chen, W. He, Z. Chen, Z. Zhou, and Q. Liu, Effect of wavy profile on the fabrication and mechanical properties of Al/Ti/Al composites prepared by rolling bonding: Experiments and finite element simulations, Adv. Eng. Mater., vol. 21, no. 11, pp. 1900637, 2019. DOI: https://doi.org/10.1002/adem.201900637.
- A. Durgutlu, B. Gülenç, and F. Findik, Examination of copper/stainless steel joints formed by explosive welding, Mater. Des., vol. 26, no. 6, pp. 497–507, 2005. DOI: https://doi.org/10.1016/j.matdes.2004.07.021.
- X. Xu, H. Tang, R. Augello, and E. Carrera, Optimized free-form surface modeling of point clouds from laser-based measurement, Mech. Adv. Mater. Struct., Published online: 18 Nov 2019. DOI: https://doi.org/10.1080/15376494.2019.1688435.
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., Published Online: 17 Dec 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473.
- H. Yang, X. Xu, and I. Neumann, An automatic finite element modelling for deformation analysis of composite structures, Compos. Struct., vol. 212, pp. 434–438, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.01.047.
- Y. Iwahashi, Z. Horita, M. Nemoto, J. Wang, and T.G. Langdon, Principle of equal-channel angular pressing for the processing of ultra-fine grained materials, Scr. Mater., vol. 35, no. 2, pp. 143–146, 1996. DOI: https://doi.org/10.1016/1359-6462(96)00107-8.
- S.E. Mousavi, M.H. Khaleghifar, M. Meratian, B. Sadeghi, and P. Cavaliere, Effect of the equal channel angular pressing route on the microstructural and mechanical behavior of Al-5086 alloy, Materialia, vol. 4, pp. 310–322, 2018. DOI: https://doi.org/10.1016/j.mtla.2018.10.007.
- K. Oh-Ishi, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon, Optimizing the rotation conditions for grain refinement in equal-channel angular pressing, Metall. Mater. Trans. A., vol. 29, no. 7, pp. 2011–2013, 1998. DOI: https://doi.org/10.1007/s11661-998-0027-z.
- V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev, Influence of ECAP routes on the microstructure and properties of pure Ti, Mater. Sci. Eng. A., vol. 299, no. 1-2, pp. 59–67, 2001. DOI: https://doi.org/10.1016/S0921-5093(00)01411-8.
- R. Singh, S. Kumar, N. Mukhopadhyay, G. Sastry, and R. Manna, Development of bulk ultrafine-grained cold reducible grade low carbon steel produced by equal-channel angular pressing, Int. J. Metall. Eng., vol. 2, pp. 62–68, 2013.
- J. Zrnik, R. Lapovok, and G. Raab, Prior thermo-mechanical processing to modify structure and properties of severely deformed low carbon steel, IOP Conference Series: Materials Science and Engineering, vol. 63, pp.012066, 2014. DOI: https://doi.org/10.1088/1757-899X/63/1/012066.
- E. Carton, Wave forming mechanisms in explosive welding, Mater. Sci. Forum., vol. 465-466, pp. 219–224, 2004. DOI: https://doi.org/10.4028/www.scientific.net/MSF.465-466.219.
- M. Zebardast and A.K. Taheri, The cold welding of copper to aluminum using equal channel angular extrusion (ECAE) process, J. Mater. Process. Technol., vol. 211, no. 6, pp. 1034–1043, 2011. DOI: https://doi.org/10.1016/j.jmatprotec.2011.01.004.
- V. Segal, Materials processing by simple shear, Mater. Sci. Eng. A., vol. 197, no. 2, pp. 157–164, 1995. DOI: https://doi.org/10.1016/0921-5093(95)09705-8.
- M. Rifai, H. Miyamoto, and H. Fujiwara, The effect of ECAP deformation route on microstructure, mechanical and electrochemical properties of low CN Fe-20% Cr alloy, Mater Sci. Appl., vol. 05, no. 08, pp. 568–578, 2014. DOI: https://doi.org/10.4236/msa.2014.58059.
- M. Staker and D. Holt, The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700 C, Acta Metall., vol. 20, no. 4, pp. 569–579, 1972. DOI: https://doi.org/10.1016/0001-6160(72)90012-0.
- N. Koneva, Internal long-range stress fields in ultrafine grained materials. In Severe Plastic Deformation: Toward Bulk Production of Nanostructured Materials, ed. BS Altan, Nova Science Publishers, Inc, New York, pp. 249–274, 2005.
- J. Bailey and P. Hirsch, The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver, Philos. Mag., vol. 5, no. 53, pp. 485–497, 1960. DOI: https://doi.org/10.1080/14786436008238300.
- D.L. Holt, Dislocation cell formation in metals, J. Appl. Phys., vol. 41, no. 8, pp. 3197–3201, 1970. DOI: https://doi.org/10.1063/1.1659399.
- A. Afsari and M. Ranaei, Equal channel angular pressing to produce ultrafine pure copper with excellent electrical and mechanical properties, Int. J. Nanosci. Nanotechnol., vol. 10, pp. 215–222, 2014.