References
- G. Kaklauskas, Flexural layered deformational model of reinforced concrete members, Mag. Concr. Res., vol. 56, no. 10, pp. 575–584, 2004. DOI: https://doi.org/10.1680/macr.2004.56.10.575.
- G. Kaklauskas, V. Gribniak, D. Bacinskas, and P. Vainiunas, Shrinkage influence on tension stiffening in concrete members, Eng. Struct., vol. 31, no. 6, pp. 1305–1312, 2009. DOI: https://doi.org/10.1016/j.engstruct.2008.10.007.
- V. Gribniak, G. Kaklauskas, and D. Bacinskas, Experimental investigation of shrinkage influence on tension stiffening of RC beams. Creep, Shrinkage and Durabilityu of Concrete and Concrete Structrures (ConCreep 8), Proc of the Eight International Conference, vol. 1, pp. 571–577, Ise-Shima, Japan. London: CRC Press, 2009.
- B.B. Broms, Crack width and crack spacing in reinforced concrete members, Am. Concr. Inst. J., vol. 62, no. 10, pp. 1237–1256, 1965.
- B.B. Broms and L.A. Lutz, Effects of arrangement of reinforcement on crack width and spacing of reinforced concrete members, J. Proc., vol. 62, no. 11, pp. 1395–1410, 1965.
- P. Gergely and L.A. Lutz, Maximum Crack Width in Reinforced Concrete Flexural Members. Causes, Mechanism, and Control of Cracking in Concrete, American Concrete Institute, Detroit, vol. 20, pp. 87–117, 1968.
- M. Otieno, J. Ikotun, and Y. Ballim, Experimental investigations on the influence of cover depth and concrete quality on time to cover cracking due to carbonation-induced corrosion of steel in RC structures in an urban, inland environment, Constr. Build. Mater., vol. 198, pp. 172–181, 2019. DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.215.
- R. Saliger, High grade steel in reinforced concrete. 2nd Congress of IABSE, IABSE Publications, Berlin-Munich, 1936.
- P. Noakowski, Verbundorientierte, kontinuierliche Theorie zur Ermittlung der Rißbreite. Wirklichkeitsnaher und einfacher Nachweis unter Berücksichtigung der Verbundgesetze und der Betonzugfestigkeit sowie unter Verknüpfung des Erstriß-und Endrißzustands (Teil 1). Beton-und Stahlbetonbau, vol. 80, no. 7, pp. 185–190, 1985. (In German). DOI: https://doi.org/10.1002/best.198500350.
- J. F. Borges, Cracking and Deformability of Reinforced Concrete Beams, Laboratorio Nacional de Engenharia Civil, Lisbon, 1965.
- C.E.-I du B. (CEB-FIP). fib Model Code for Concrete Structures 2010. Ernst & Sohn, Berlin, Germany. 2013.
- E. C. for S (CEN). Eurocode 2: Design of concrete structures—Part 1-1: General rules and rules for buildings. EN 1992-1-1, 2004.
- A.W. Beeby, The influence of the parameter φ/ρeff on crack widths, Struct. Concr., vol. 5, no. 2, pp. 71–83, 2004. DOI: https://doi.org/10.1680/stco.2004.5.2.71.
- B.H. Oh and Y.J. Kang, New formulas for maximum crack width and crack spacing in reinforced concrete flexural members, Struct. J., vol. 84, no. 2, pp. 103–112, 1987.
- J.-J. Wang, M.-X. Tao, and X. Nie, Fracture energy-based model for average crack spacing of reinforced concrete considering size effect and concrete strength variation, Constr. Build. Mater., vol. 148, pp. 398–410, 2017. DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.082.
- I. Sanal, Effect of shear span-to-depth ratio on mechanical performance and cracking behavior of high strength steel fiber-reinforced concrete beams without conventional reinforcement, Mech. Adv. Mat. Struct., pp. 1–16, 2019. DOI: https://doi.org/10.1080/15376494.2018.1527963.
- D.A. Pozharskii, B.V. Sobol, and P.V. Vasiliev, Periodic crack system in a layered elastic wedge, Mech. Adv. Mat. Struct., vol. 27, no. 4, pp. 318–324, 2020. DOI: https://doi.org/10.1080/15376494.2018.1472346.
- H. Yang and X. Xu, Multi-sensor technology for B-spline modelling and deformation analysis of composite structures, Comp. Struct., vol. 224, pp. 111000, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111000.
- X. Xu, H. Yang, R. Augello, and E. Carrera, Optimized free-form surface modelling of point clouds from laser-based measurement, Mech. Adv. Mat. Struct., pp. 1–8, 2019.
- A. Borosnyói and G.L. Balázs, Models for flexural cracking in concrete: the state of the art, Struct. Concr., vol. 6, no. 2, pp. 53–62, 2005. DOI: https://doi.org/10.1680/stco.2005.6.2.53.
- M. Lapi, M. Orlando, and P. Spinelli, A review of literature and code formulations for cracking in R/C members, Struct. Concr., vol. 19, no. 5, pp. 1481–1503, 2018. DOI: https://doi.org/10.1002/suco.201700248.
- G. Kaklauskas and R. Ramanauskas, A new approach in predicting the mean crack spacing of flexural reinforced concrete elements. in fib Symposium 2016, Performance-Based Approaches for Concrete Structures, Cape Town, South Africa, pp. 1–11., 2016.
- G. Kaklauskas, Crack model for RC members based on compatibility of stress-transfer and mean-strain approaches, J. Struct. Eng., vol. 143, no. 9, pp. 04017105–04017851, 2017. DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001842.
- G. Kaklauskas, R. Ramanauskas, and R. Jakubovskis, Mean crack spacing modelling for RC tension elements, Eng. Struct., vol. 150, pp. 843–851, 2017. DOI: https://doi.org/10.1016/j.engstruct.2017.07.090.
- P.L. Ng, F.J. Ma, and A.K.H. Kwan, Crack analysis of concrete beams based on pseudo-discrete crack model, Proceedings of the Second International Conference on Performance-Based and Life-Cycle Structural Engineering, Brisbane, Australia, pp. 669–678, 2015. DOI: https://doi.org/10.14264/uql.2016.1184.
- M. Kurumatani, Y. Soma, and K. Terada, Simulations of cohesive fracture behavior of reinforced concrete by a fracture-mechanics-based damage model, Eng. Fract. Mech., vol. 206, pp. 392–407, 2019. DOI: https://doi.org/10.1016/j.engfracmech.2018.12.006.
- C. Nader, P. Rossi, and J.L. Tailhan, Multi-scale strategy for modelling macrocracks propagation in reinforced concrete structures, Cem. Concr. Comp., vol. 99, pp. 262–274, 2019. DOI: https://doi.org/10.1016/j.cemconcomp.2018.04.012.
- R.D. Vanluchene and R. Sun, Neural networks in structural engineering, Comp.-Aided Civ. Infrastruct. Eng., vol. 5, no. 3, pp. 207–215, 1990. DOI: https://doi.org/10.1111/j.1467-8667.1990.tb00377.x.
- J. Ghaboussi, J.H. Garrett, Jr., and X. Wu, Knowledge-based modelling of material behaviour with neural networks, J. Eng. Mech., vol. 117, no. 1, pp. 132–153, 1991. DOI: https://doi.org/10.1061/(ASCE)0733-9399(1991)117:1(132).
- J. Kasperkiewicz, J. Racz, and A. Dubrawski, HPC strength prediction using artificial neural network, J. Comp. Civ. Eng., American Society of Civil Engineers., vol. 9, no. 4, pp. 279–284, 1995. DOI: https://doi.org/10.1061/(ASCE)0887-3801(1995)9:4(279).
- A. Sanad and M.P. Saka, Prediction of ultimate shear strength of reinforced-concrete deep beams using neural networks, J. Struct. Eng., vol. 127, no. 7, pp. 818–828, 2001. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(818).
- I.M. Nikbin, S. Rahimi, and H. Allahyari, A new empirical formula for prediction of fracture energy of concrete based on the artificial neural network, Eng. Fract. Mech., vol. 186, pp. 466–482, 2017. DOI: https://doi.org/10.1016/j.engfracmech.2017.11.010.
- H. Moon and J. Kim, Intelligent crack detecting algorithm on the concrete crack image using neural network, Proc. 28th ISARC, pp. 1461–1467, 2011. DOI: https://doi.org/10.22260/ISARC2011/0279.
- Y.-J. Cha, W. Choi, and O. Büyüköztürk, Deep learning-based crack damage detection using convolutional neural networks, Comp.-Aided Civ. Infrastruct. Eng., vol. 32, no. 5, pp. 361–378, 2017. DOI: https://doi.org/10.1111/mice.12263.
- S. Dorafshan, R.J. Thomas, and M. Maguire, Comparison of deep convolutional neural networks and edge detectors for image-based crack detection in concrete, Constr. Build. Mater., vol. 186, pp. 1031–1045, 2018. DOI: https://doi.org/10.1016/j.conbuildmat.2018.08.011.
- C.V. Dung and L.D. Anh, Autonomous concrete crack detection using deep fully convolutional neural network, Autom. Constr., vol. 99, pp. 52–58, 2019. DOI: https://doi.org/10.1016/j.autcon.2018.11.028.
- G. Bayar and T. Bilir, A novel study for the estimation of crack propagation in concrete using machine learning algorithms, Constr. Build. Mater., vol. 215, pp. 670–685, 2019. DOI: https://doi.org/10.1016/j.conbuildmat.2019.04.227.
- R. Ince, Prediction of fracture parameters of concrete by artificial neural networks, Eng. Fract. Mech., vol. 71, no. 15, pp. 2143–2159, 2004. DOI: https://doi.org/10.1016/j.engfracmech.2003.12.004.
- A.A. Elshafey, N. Dawood, H. Marzouk, and M. Haddara, Crack width in concrete using artificial neural networks, Eng. Struct., vol. 52, pp. 676–686, 2013. DOI: https://doi.org/10.1016/j.engstruct.2013.03.020.
- A.A. Elshafey, N. Dawood, H. Marzouk, and M. Haddara, Predicting of crack spacing for concrete by using neural networks, Eng. Fail. Anal., vol. 31, pp. 344–359, 2013. DOI: https://doi.org/10.1016/j.engfailanal.2013.02.011.
- T. Shaikhina and N.A. Khovanova, Handling limited datasets with neural networks in medical applications: A small-data approach, Artif. Intel. Med., vol. 75, pp. 51–63, 2017. DOI: https://doi.org/10.1016/j.artmed.2016.12.003.
- R.I. Gilbert and S. Nejadi, An Experimental Study of Flexural Cracking in Reinforced Concrete Members under Short Term Loads, University of New South Wales, School of Civil and Environmental Engineering, Kensington, Australia, 2004.
- H.Q. Wu and R.I. Gilbert, Modelling short-term tension stiffening in reinforced concrete prisms using a continuum-based finite element model, Eng. Struct., vol. 31, no. 10, pp. 2380–2391, 2009. DOI: https://doi.org/10.1016/j.engstruct.2009.05.012.
- J.-M. Henault, et al., Quantitative strain measurement and crack detection in RC structures using a truly distributed fibre optic sensing system, Constr. Buildi. Mater., vol. 37, pp. 916–923, 2012. DOI: https://doi.org/10.1016/j.conbuildmat.2012.05.029.
- G. Kaklauskas, A. Sokolov, R. Ramanauskas, and R. Jakubovskis, Reinforcement strains in reinforced concrete tensile members recorded by strain gauges and FBG sensors: experimental and numerical analysis. Sens Multi Digital Publishing Inst., vol. 19, no. 1, pp. 200, 2019. DOI: https://doi.org/10.3390/s19010200.
- R. Jakubovskis, Suderintas gelžbetoninių elementų pleišėjimo, deformacijų ir sukibimo modeliavimas. VGTU leidykla “Technika”, 2015. (In Lithuanian).
- P. Marti, M. Alvarez, W. Kaufmann, and V. Sigrist, Tension chord model for structural concrete, Struc. Eng. Int., vol. 8, no. 4, pp. 287–298, 1998. DOI: https://doi.org/10.2749/101686698780488875.
- A.W. Beeby, An Investigation of Cracking in Slabs Spanning One Way. Technical Report No. TRA 433, London, 1971.
- E. Calderón Bello, Estudio experimental de la fisuración en piezas de hormigón armado sometidas a flexión pura, Caminos, 2008. (In Spanish).
- R.J. Frosch, D.T. Blackman, and R.D. Radabaugh, Investigation of bridge deck cracking in various bridge superstructure systems, Publication FHWA/IN/JTRP-2002/25, 2003. DOI: https://doi.org/10.5703/1288284313257.
- V. Gribniak, A.P. Caldentey, G. Kaklauskas, A. Rimkus, and A. Sokolov, Effect of arrangement of tensile reinforcement on flexural stiffness and cracking, Eng. Struct., Elsevier., vol. 124, pp. 418–428, 2016. DOI: https://doi.org/10.1016/j.engstruct.2016.06.026.
- G.A. Plizzari, E. Marchina, and E. Giuriani, Experimental study of splitting and flexural cracks in a RC beam with overlapped splices, Mat. Struct., vol. 29, no. 1, pp. 19–27, 1996. DOI: https://doi.org/10.1007/BF02486003.
- E. Hognestad, High-strength bars as concrete reinforcement, Part 2: Control of flexural cracking, J. PCA Res. Dev. Lab., vol. 4, no. 1, pp. 46–63, 1962.
- H.P. Liao and S.S. Fang, An experimental study on flexural behavior of reinforced concrete beams strengthened with high-performance ferrocement, In Advanced Materials Research, vol. 163–167, pp. 3772–3776, 2010. DOI: https://doi.org/10.4028/www.scientific.net/AMR.163-167.3772.
- M.M. Rafi, A. Nadjai, and F. Ali, Experimental testing of concrete beams reinforced with carbon FRP bars, J. Comp. Mater. Sage Publications Sage UK: London, England., vol. 41, no. 22, pp. 2657–2673, 2007. DOI: https://doi.org/10.1177/0021998307078727.
- H. Rüsch and G. Rehm, Versuche mit Betonformstahlen, Deutscher Ausschuss fur Stahlbeton, Berlin, 1964. (In German).
- L. Vandewalle, Cracking behaviour of concrete beams reinforced with a combination of ordinary reinforcement and steel fibres, Mat. Struct., vol. 33, no. 3, pp. 164–170, 2000. DOI: https://doi.org/10.1007/BF02479410.
- H.Q. Wu, Tension Stiffening in Reinforced Concrete-Instantaneous and Time-Dependent Behavior, University of New South Wales, Sydney, 2010.
- I.-H. Yang, C. Joh, and K.-C. Kim, A comparative experimental study on the flexural behavior of high-strength fiber-reinforced concrete and high-strength concrete beams, Adv. Mater. Sci. Eng., Hindawi., vol. 2018, pp. 1–13, 2018. DOI: https://doi.org/10.1155/2018/7390798.
- S.B. Zhao, J. Guang, X. Zhang, X. Cheng, and C. Huang, Experimental study and statistical analysis of crack patterns of reinforced concrete beams, Eng. Mech., vol. 25, no. 12, pp. 141–146, 2008. (In Chinese)
- S. Feng, H. Zhou, and H. Dong, Using deep neural network with small dataset to predict material defects, Mater. Des., vol. 162, pp. 300–310, 2019. DOI: https://doi.org/10.1016/j.matdes.2018.11.060.
- J. Timmer, Power of surrogate data testing with respect to nonstationarity, Phys. Rev. E, vol. 58, no. 4, pp. 5153–5156, 1998. DOI: https://doi.org/10.1103/PhysRevE.58.5153.
- M.T. Hagan, H.B. Demuth, M.H. Beale, and O. De Jesús, Neural Network Design, Pws Pub, Boston, MA, 1996.
- S. Lawrence, C.L. Giles, and A.C. Tsoi, What size neural network gives optimal generalization? Convergence properties of backpropagation. Technical Report UMIACS-TR-96-22 and CS-TR-3617, Institute for Advanced Computer Studies, University of Maryland, College Park, MD, 1998.
- K.-H. Reineck, Ultimate shear force of structural concrete members without transverse reinforcement derived from a mechanical model (SP-885), Struct. J., vol. 88, no. 5, pp. 592–602, 1991.
- A.B. Rasmussen, B.W. Sørensen, M. Skov, P.K. Rasmussen, and L.G. Hagsten, An experimental study of crack development in flexural reinforced concrete members. In: IABSE Symposium Report, International Association for Bridge and Structural Engineering, pp. 3092–3099, 2017.