References
- C. Emmelmann, P. Sander, J. Kranz, et al., Laser additive manufacturing and bionics: redefining lightweight design, Phys. Procedia., vol. 12, pp. 364–368, 2011. DOI: https://doi.org/10.1016/j.phpro.2011.03.046.
- L. Hao, W.Y. Chen, J.F. Ma, et al., Structural bionic design and experimental verification of a machine tool column, J. Bionic. Eng. Suppl., vol. 5, no. 6, pp. 46–52, 2008. DOI: https://doi.org/10.1016/S1672-6529(08)60071-2.
- H. Nakahara, G. Bevelander, and K. Kakei Mitsuo, Electro micro-scopic and amino acid studies on the outer and inner shell layers of haliotis rufescens, Venus., vol. 41, no. 1, pp. 33–46, 1982.
- X.U.E. Kai and L.I. Yongxin, A bionic venation growth algorithm for astiffener layout in plate/shell structure, J. Harbin Eng. Univ., vol. 32, no. 9, pp. 1262–1266, 2011. DOI: https://doi.org/10.3969/j.issn.1007-7043.2011.09.029.
- Y. Li, F. Wu, F. Cheng, et al., Venation-like layout design of plate’s stiffeners, Key Eng. Mater., vol. 621, no. 621, pp. 351–353, 2014. DOI: https://doi.org/10.4028/www.scientific.net/KEM.621.351.
- C. Menon and M. Sitti, A biomimetic climbing robot based on the Gecko, J. Bionic. Eng., vol. 3, no. 3, pp. 115–125, 2006. DOI: https://doi.org/10.1016/S1672-6529(06)60015-2.
- P.A. Cundall and O.D.L. Strack, A discrete numerical model for granular assemblies, Geotechnique, vol. 30, no. 3, pp. 331–336, 1980. DOI: https://doi.org/10.1680/geot.1980.30.3.331.
- B. Nassauer, T. Liedke, and M. Kuna, Development of a coupled discrete element (DEM) - smoothed particle hydrodynamics (SPH) simulation method for polyhedral particles, Comp. Part. Mech., vol. 3, no. 1, pp. 95–106, 2016. DOI: https://doi.org/10.1007/s40571-015-0097-9.
- D. Nguyen, A. Rasmuson, K. Thalberg, and I.N. Björn, The exchange of fines between carriers in adhesive particle mixing: a study using DEM simulation, Powder Technol., vol. 288, pp. 266–278, 2016. DOI: https://doi.org/10.1016/j.powtec.2015.10.048.
- G. Qi, W. Zhengying, M. Hao, and C. Qiao, Numerical and experimental research on the rock-breaking process of tunnel boring machine normal disc cutters, J. Mech. Sci. Technol., vol. 30, no. 4, pp. 1733–1745, 2016. DOI: https://doi.org/10.1007/s12206-016-0329-9.
- E.R.D. Cunha, R.M.D. Carvalho, and L.M. Tavares, Simulation of solids flow and energy transfer in a vertical shaft impact crusher using DEM, Miner. Eng., vol. 43–44, no. 43–44, pp. 85–90, 2013. DOI: https://doi.org/10.1016/j.mineng.2012.09.003.
- M. Santasusana, J. Irazábal, E. Oñate, and J.M. Carbonell, The double hierarchy method. A parallel 3D contact method for the interaction of spherical particles with rigid FE boundaries using the DEM, Comp. Part. Mech., vol. 3, no. 3, pp. 407–428, 2016. DOI: https://doi.org/10.1007/s40571-016-0109-4.
- H. L. Feng, Erosion Wear Resistance Characteristics of Desert Streak Buthus and Its Bionic Application, Jilin University Press, Jilin, 2015.
- D.A. Santos, M.A.S. Barrozo, C.R. Duarte, F. Weigler, and J. Mellmann, Investigation of particle dynamics in a rotary drum by means of experiments and numerical simulations using DEM, Adv. Powder Technol., vol. 27, no. 2, pp. 692–703, 2016. DOI: https://doi.org/10.1016/j.apt.2016.02.027.
- D. Shi, L. Zheng, J. Xue, and J. Sun, DEM modeling of particle breakage in silica sands under one-dimensional compression, Acta Mech. Solida Sin., vol. 29, no. 1, pp. 78–94, 2016. DOI: https://doi.org/10.1016/S0894-9166(16)60008-3.
- Y. He, Y.Y. Li, T.J. Evans, A.B. Yu, and R.Y. Yang, Effects of particle characteristics and consolidation pressure on the compaction of non-spherical particles, Miner. Eng., vol. 137, pp. 241–249, 2019. DOI: https://doi.org/10.1016/j.mineng.2019.04.007.
- P. Itävuo, E. Hulthén, M. Yahyaei, and M. Vilkko, Mass balance control of crushing circuits, Miner. Eng., vol. 135, pp. 37–47, 2019. DOI: https://doi.org/10.1016/j.mineng.2019.02.033.
- Y.W. Li, L.L. Zhao, E.Y. Hu, et al., Laboratory-scale validation of a DEM model of a toothed double-roll crusher and numerical studies, Powder Technol., vol. 356, pp. 60–72, 2019. DOI: https://doi.org/10.1016/j.powtec.2019.08.010.
- K. Yu and D. Tafti, Impact model for micrometer-sized sand particles, Powder Technol., vol. 294, pp. 11–21, 2016. DOI: https://doi.org/10.1016/j.powtec.2016.02.014.
- B. Wang, U. Martin, and S. Rapp, Discrete element modeling of the single-particle crushing test for ballast stones, Comput. Geotech., vol. 88, pp. 61–73, 2017. DOI: https://doi.org/10.1016/j.compgeo.2017.03.007.
- T. Zhao, G.B. Crosta, S. Utili, and F.V.D. Blasio, Investigation of rock fragmentation during rockfalls and rock avalanches via 3‐D discrete element analyses, J. Geophys. Res. Earth Surf., vol. 122, no. 3, pp. 678–695, 2017. DOI: https://doi.org/10.1002/2016JF004060.
- L. Jun, L. Fu-Hai, and K. Xian-Jing, Particle flow code numerical simulation of particle breakage of rockfill, Rock Soil Mech., Suppl no. 29, pp. 107–112, 2008. DOI: https://doi.org/10.16285/j.rsm.2008.s1.061.